[PATCH v2 2/3] arm64: dts: meson: add initial device-tree for MeCool KII Pro

[Christian Hewitt <christianshewitt@gmail.com>]

MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference
board with an S905D chip and the following specs:

- 2GB DDR3 RAM
- 16GB eMMC
- 10/100 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x micro SD card slot

Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../meson-gxl-s905d-mecool-kii-pro.dts        | 86 +++++++++++++++++++
 2 files changed, 87 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index aebd49c88719..f8f515c93055 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
new file mode 100644
index 000000000000..5ab5d3aa0646
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "MeCool KII Pro";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	linux,rc-map-name = "rc-mecool-kii-pro";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
-- 
2.17.1