All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: "Andrew Jeffery" <andrew@aj.id.au>,
	"Cédric Le Goater" <clg@kaod.org>,
	qemu-arm@nongnu.org, "Joel Stanley" <joel@jms.id.au>,
	qemu-devel@nongnu.org
Subject: [PATCH 22/24] hw/misc: Add Infineon DPS310 sensor model
Date: Wed,  7 Apr 2021 19:16:35 +0200	[thread overview]
Message-ID: <20210407171637.777743-23-clg@kaod.org> (raw)
In-Reply-To: <20210407171637.777743-1-clg@kaod.org>

From: Joel Stanley <joel@jms.id.au>

This contains some hardcoded register values that were obtained from the
hardware after reading the temperature.

It does enough to test the Linux kernel driver.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/misc/dps310.c    | 339 ++++++++++++++++++++++++++++++++++++++++++++
 hw/arm/Kconfig      |   1 +
 hw/misc/Kconfig     |   4 +
 hw/misc/meson.build |   1 +
 4 files changed, 345 insertions(+)
 create mode 100644 hw/misc/dps310.c

diff --git a/hw/misc/dps310.c b/hw/misc/dps310.c
new file mode 100644
index 000000000000..153357b88236
--- /dev/null
+++ b/hw/misc/dps310.c
@@ -0,0 +1,339 @@
+/*
+ * Infineon DPS310 temperature and himidity sensor
+ *
+ * Copyright 2017 IBM Corporation
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "migration/vmstate.h"
+
+typedef struct DPS310State {
+    /*< private >*/
+    I2CSlave i2c;
+
+    /*< public >*/
+
+    uint8_t regs[0x30];
+
+    int16_t pressure, temperature;
+
+    uint8_t len;
+    uint8_t buf[2];
+    uint8_t pointer;
+
+} DPS310State;
+
+typedef struct DPS310Class {
+    I2CSlaveClass parent_class;
+} DPS310Class;
+
+#define TYPE_DPS310 "dps310"
+#define DPS310(obj) OBJECT_CHECK(DPS310State, (obj), TYPE_DPS310)
+
+#define DPS310_CLASS(klass) \
+     OBJECT_CLASS_CHECK(DPS310Class, (klass), TYPE_DPS310)
+#define DPS310_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(DPS310Class, (obj), TYPE_DPS310)
+
+#define DPS310_PRS_B2           0x00
+#define DPS310_PRS_B1           0x01
+#define DPS310_PRS_B0           0x02
+#define DPS310_TMP_B2           0x03
+#define DPS310_TMP_B1           0x04
+#define DPS310_TMP_B0           0x05
+#define DPS310_PRS_CFG          0x06
+#define DPS310_TMP_CFG          0x07
+#define  DPS310_TMP_RATE_BITS   GENMASK(6, 4)
+#define DPS310_MEAS_CFG         0x08
+#define  DPS310_MEAS_CTRL_BITS  GENMASK(2, 0)
+#define   DPS310_PRESSURE_EN    BIT(0)
+#define   DPS310_TEMP_EN        BIT(1)
+#define   DPS310_BACKGROUND     BIT(2)
+#define  DPS310_PRS_RDY         BIT(4)
+#define  DPS310_TMP_RDY         BIT(5)
+#define  DPS310_SENSOR_RDY      BIT(6)
+#define  DPS310_COEF_RDY        BIT(7)
+#define DPS310_RESET            0x0c
+#define  DPS310_RESET_MAGIC     (BIT(0) | BIT(3))
+#define DPS310_COEF_BASE        0x10
+
+static void dps310_reset(DeviceState *dev)
+{
+    DPS310State *s = DPS310(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+    s->pointer = 0;
+
+    s->regs[0x00] = 0xf3;
+    s->regs[0x01] = 0x4a;
+    s->regs[0x02] = 0xcc;
+    s->regs[0x03] = 0x06;
+    s->regs[0x04] = 0x7b;
+    s->regs[0x05] = 0xf3;
+    s->regs[0x06] = 0x07;
+    s->regs[0x07] = 0x87;
+    s->regs[0x08] = 0xc0;
+    s->regs[0x09] = 0x0c;
+    s->regs[0x0a] = 0x00;
+    s->regs[0x0b] = 0x00;
+    s->regs[0x0c] = 0x00;
+    s->regs[0x0d] = 0x10;
+    s->regs[0x0e] = 0x00;
+    s->regs[0x0f] = 0x00;
+    s->regs[0x10] = 0x0e;
+    s->regs[0x11] = 0x0e;
+    s->regs[0x12] = 0xdb;
+    s->regs[0x13] = 0x13;
+    s->regs[0x14] = 0xca;
+    s->regs[0x15] = 0xff;
+    s->regs[0x16] = 0x35;
+    s->regs[0x17] = 0x10;
+    s->regs[0x18] = 0xf3;
+    s->regs[0x19] = 0x34;
+    s->regs[0x1a] = 0x05;
+    s->regs[0x1b] = 0xc3;
+    s->regs[0x1c] = 0xd6;
+    s->regs[0x1d] = 0x84;
+    s->regs[0x1e] = 0x00;
+    s->regs[0x1f] = 0xa4;
+    s->regs[0x20] = 0xf9;
+    s->regs[0x21] = 0xa9;
+    s->regs[0x22] = 0x00;
+    s->regs[0x23] = 0x00;
+    s->regs[0x24] = 0x20;
+    s->regs[0x25] = 0x49;
+    s->regs[0x26] = 0x4a;
+    s->regs[0x27] = 0x41;
+    s->regs[0x28] = 0x86;
+    s->regs[0x29] = 0x00;
+    s->regs[0x2a] = 0x00;
+    s->regs[0x2b] = 0x00;
+    s->regs[0x2c] = 0x00;
+    s->regs[0x2d] = 0x00;
+    s->regs[0x2e] = 0x00;
+    s->regs[0x2f] = 0x00;
+
+    /* TODO: assert these after some timeout ? */
+    s->regs[DPS310_MEAS_CFG] = DPS310_COEF_RDY | DPS310_SENSOR_RDY
+        | DPS310_TMP_RDY | DPS310_PRS_RDY;
+
+}
+
+
+static void dps310_get_pressure(Object *obj, Visitor *v, const char *name,
+                                   void *opaque, Error **errp)
+{
+    DPS310State *s = DPS310(obj);
+    int64_t value;
+
+    /* TODO */
+    value = s->pressure;
+
+    visit_type_int(v, name, &value, errp);
+}
+
+static void dps310_get_temperature(Object *obj, Visitor *v, const char *name,
+                                   void *opaque, Error **errp)
+{
+    DPS310State *s = DPS310(obj);
+    int64_t value;
+
+    /* TODO */
+    value = s->temperature;
+
+
+    visit_type_int(v, name, &value, errp);
+}
+
+static void dps310_set_temperature(Object *obj, Visitor *v, const char *name,
+                                   void *opaque, Error **errp)
+{
+    DPS310State *s = DPS310(obj);
+    Error *local_err = NULL;
+    int64_t temp;
+
+    visit_type_int(v, name, &temp, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    /* TODO */
+    if (temp >= 200 || temp < -100) {
+        error_setg(errp, "value %" PRId64 ".%03" PRIu64 " °C is out of range",
+                   temp / 1000, temp % 1000);
+        return;
+    }
+
+    s->temperature = temp;
+}
+
+static void dps310_set_pressure(Object *obj, Visitor *v, const char *name,
+                                   void *opaque, Error **errp)
+{
+    DPS310State *s = DPS310(obj);
+    Error *local_err = NULL;
+    int64_t pres;
+
+    visit_type_int(v, name, &pres, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    /* TODO */
+    if (pres >= 200 || pres < -100) {
+        error_setg(errp, "value %" PRId64 ".%03" PRIu64 " is out of range",
+                   pres / 1000, pres % 1000);
+        return;
+    }
+
+    s->pressure = pres;
+}
+
+static void dps310_read(DPS310State *s)
+{
+    s->len = 0;
+
+    switch (s->pointer) {
+    case DPS310_PRS_B2:
+    case DPS310_PRS_B1:
+    case DPS310_PRS_B0:
+    case DPS310_TMP_B2:
+    case DPS310_TMP_B1:
+    case DPS310_TMP_B0:
+    case DPS310_PRS_CFG:
+    case DPS310_TMP_CFG:
+    case DPS310_MEAS_CFG:
+    case DPS310_COEF_BASE:
+    default:
+        s->buf[s->len++] = s->regs[s->pointer];
+        break;
+    }
+}
+
+static void dps310_write(DPS310State *s)
+{
+    switch (s->pointer) {
+    case DPS310_RESET:
+        if (s->buf[0] == DPS310_RESET_MAGIC) {
+            dps310_reset(DEVICE(s));
+        }
+        break;
+    case DPS310_PRS_CFG:
+    case DPS310_TMP_CFG:
+    case DPS310_MEAS_CFG:
+    case DPS310_COEF_BASE:
+    default:
+        s->regs[s->pointer] = s->buf[0];
+        break;
+    }
+}
+
+static uint8_t dps310_rx(I2CSlave *i2c)
+{
+    DPS310State *s = DPS310(i2c);
+
+    if (s->len < 2) {
+        return s->buf[s->len++];
+    } else {
+        return 0xff;
+    }
+}
+
+static int dps310_tx(I2CSlave *i2c, uint8_t data)
+{
+    DPS310State *s = DPS310(i2c);
+
+    if (s->len == 0) {
+        /*
+         * first byte is the register pointer for a read or write
+         * operation
+         */
+        s->pointer = data;
+        s->len++;
+    } else if (s->len == 1) {
+        /*
+         * second byte is the data to write. The device only supports
+         * one byte writes
+         */
+        s->buf[0] = data;
+        dps310_write(s);
+    }
+
+    return 0;
+}
+
+static int dps310_event(I2CSlave *i2c, enum i2c_event event)
+{
+    DPS310State *s = DPS310(i2c);
+
+    if (event == I2C_START_RECV) {
+        dps310_read(s);
+    }
+
+    s->len = 0;
+    return 0;
+}
+
+static const VMStateDescription vmstate_dps310 = {
+    .name = "DPS310",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(len, DPS310State),
+        VMSTATE_UINT8_ARRAY(buf, DPS310State, 2),
+        VMSTATE_UINT8_ARRAY(regs, DPS310State, 0x30),
+        VMSTATE_UINT8(pointer, DPS310State),
+        VMSTATE_INT16(temperature, DPS310State),
+        VMSTATE_INT16(pressure, DPS310State),
+        VMSTATE_I2C_SLAVE(i2c, DPS310State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+
+static void dps310_initfn(Object *obj)
+{
+    object_property_add(obj, "temperature", "int",
+                        dps310_get_temperature,
+                        dps310_set_temperature, NULL, NULL);
+    object_property_add(obj, "pressure", "int",
+                        dps310_get_pressure,
+                        dps310_set_pressure, NULL, NULL);
+}
+
+static void dps310_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+    k->event = dps310_event;
+    k->recv = dps310_rx;
+    k->send = dps310_tx;
+    dc->reset = dps310_reset;
+    dc->vmsd = &vmstate_dps310;
+}
+
+static const TypeInfo dps310_info = {
+    .name          = TYPE_DPS310,
+    .parent        = TYPE_I2C_SLAVE,
+    .instance_size = sizeof(DPS310State),
+    .instance_init = dps310_initfn,
+    .class_init    = dps310_class_init,
+};
+
+static void dps310_register_types(void)
+{
+    type_register_static(&dps310_info);
+}
+
+type_init(dps310_register_types)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 8c37cf00da74..66532e0e3e82 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -408,6 +408,7 @@ config ASPEED_SOC
     select DS1338
     select FTGMAC100
     select I2C
+    select DPS310
     select PCA9552
     select SERIAL
     select SMBUS_EEPROM
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index c71ed2582046..016e34790e4f 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -49,6 +49,10 @@ config EDU
     default y if TEST_DEVICES
     depends on PCI && MSI_NONBROKEN
 
+config DPS310
+    bool
+    depends on I2C
+
 config PCA9552
     bool
     depends on I2C
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index ed8196dc4380..30cb61ec0e31 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -1,4 +1,5 @@
 softmmu_ss.add(when: 'CONFIG_APPLESMC', if_true: files('applesmc.c'))
+softmmu_ss.add(when: 'CONFIG_DPS310', if_true: files('dps310.c'))
 softmmu_ss.add(when: 'CONFIG_EDU', if_true: files('edu.c'))
 softmmu_ss.add(when: 'CONFIG_FW_CFG_DMA', if_true: files('vmcoreinfo.c'))
 softmmu_ss.add(when: 'CONFIG_ISA_DEBUG', if_true: files('debugexit.c'))
-- 
2.26.3



  parent reply	other threads:[~2021-04-07 17:18 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 17:16 [PATCH 00/24] aspeed: fixes and extensions Cédric Le Goater
2021-04-07 17:16 ` [PATCH 01/24] aspeed/smc: Use the RAM memory region for DMAs Cédric Le Goater
2021-04-07 17:32   ` Philippe Mathieu-Daudé
2021-04-07 17:16 ` [PATCH 02/24] aspeed/smc: Remove unused "sdram-base" property Cédric Le Goater
2021-04-07 17:32   ` Philippe Mathieu-Daudé
2021-04-07 17:16 ` [PATCH 03/24] aspeed/i2c: Fix DMA address mask Cédric Le Goater
2021-04-07 21:22   ` Philippe Mathieu-Daudé
2021-04-08  8:58     ` Cédric Le Goater
2021-04-07 17:16 ` [PATCH 04/24] aspeed/i2c: Rename DMA address space Cédric Le Goater
2021-04-07 17:33   ` Philippe Mathieu-Daudé
2021-04-07 17:16 ` [PATCH 05/24] hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use alias Cédric Le Goater
2021-04-07 17:16 ` [PATCH 06/24] hw: Model ASPEED's Hash and Crypto Engine Cédric Le Goater
2021-04-07 19:31   ` Klaus Heinrich Kiwi
2021-04-07 17:16 ` [PATCH 07/24] aspeed: Integrate HACE Cédric Le Goater
2021-04-07 19:22   ` Klaus Heinrich Kiwi
2021-04-07 17:16 ` [PATCH 08/24] tests/qtest: Add test for Aspeed HACE Cédric Le Goater
2021-04-07 19:33   ` Klaus Heinrich Kiwi
2021-04-07 17:16 ` [PATCH 09/24] aspeed: Add Scater-Gather support for HACE Hash Cédric Le Goater
2021-04-08 12:39   ` Joel Stanley
2021-04-07 17:16 ` [PATCH 10/24] tests: Aspeed HACE Scatter-Gather tests Cédric Le Goater
2021-04-07 17:16 ` [PATCH 11/24] tests/acceptance: Test ast2400 and ast2500 machines Cédric Le Goater
2021-04-07 18:40   ` Willian Rampazzo
2021-04-07 17:16 ` [PATCH 12/24] tests/acceptance: Test ast2600 machine Cédric Le Goater
2021-04-07 18:36   ` Willian Rampazzo
2021-04-07 17:16 ` [PATCH 13/24] hw/misc/aspeed_xdma: Add AST2600 support Cédric Le Goater
2021-04-07 20:29   ` Eddie James
2021-04-07 17:16 ` [PATCH 14/24] aspeed/smc: Add a 'features' attribute to the object class Cédric Le Goater
2021-04-09  6:55   ` Joel Stanley
2021-04-07 17:16 ` [PATCH 15/24] aspeed/smc: Add extra controls to request DMA Cédric Le Goater
2021-04-09  6:54   ` Joel Stanley
2021-04-10  7:08     ` Cédric Le Goater
2021-04-07 17:16 ` [PATCH 16/24] tests/qtest: Rename m25p80 test in aspeed_smc test Cédric Le Goater
2021-04-09  6:55   ` Joel Stanley
2021-04-07 17:16 ` [PATCH 17/24] aspeed: Remove swift-bmc machine Cédric Le Goater
2021-04-07 18:13   ` Adriana Kobylak
2021-04-07 18:29   ` Peter Maydell
2021-04-08  7:40     ` Cédric Le Goater
2021-04-08  9:05       ` Peter Maydell
2021-04-07 17:16 ` [PATCH 18/24] aspeed: Add support for the rainier-bmc board Cédric Le Goater
2021-04-09  6:57   ` Joel Stanley
2021-04-07 17:16 ` [PATCH 19/24] hw/misc: Add an iBT device model Cédric Le Goater
2021-04-07 17:16 ` [PATCH 20/24] aspeed: Emulate the AST2600A3 Cédric Le Goater
2021-04-07 17:16 ` [PATCH 21/24] hw/block: m25p80: Add support for mt25qu02g Cédric Le Goater
2021-04-07 17:36   ` Alistair Francis
2021-04-08  8:00   ` Francisco Iglesias
2021-04-08  8:40     ` Cédric Le Goater
2021-04-08  9:21       ` Francisco Iglesias
2021-04-07 17:16 ` Cédric Le Goater [this message]
2021-04-07 17:16 ` [PATCH 23/24] arm/aspeed: Add DPS310 to rainier Cédric Le Goater
2021-04-07 17:16 ` [PATCH 24/24] arm/aspeed: Add DPS310 to witherspoon Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210407171637.777743-23-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=joel@jms.id.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.