All of lore.kernel.org
 help / color / mirror / Atom feed
From: quanyang.wang@windriver.com
To: Mark Brown <broonie@kernel.org>,
	Michal Simek <michal.simek@xilinx.com>,
	Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Cc: linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Quanyang Wang <quanyang.wang@windriver.com>
Subject: [PATCH 1/4] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible
Date: Thu,  8 Apr 2021 12:02:20 +0800	[thread overview]
Message-ID: <20210408040223.23134-2-quanyang.wang@windriver.com> (raw)
In-Reply-To: <20210408040223.23134-1-quanyang.wang@windriver.com>

From: Quanyang Wang <quanyang.wang@windriver.com>

When Ctrl+C occurs during the process of zynqmp_qspi_exec_op, the function
wait_for_completion_interruptible_timeout will return a non-zero value
-ERESTARTSYS immediately. This will disrupt the SPI memory operation
because the data transmitting may begin before the command or address
transmitting completes. Use wait_for_completion_timeout to prevent
the process from being interruptible.

This patch fixes the error as below:
root@xilinx-zynqmp:~# flash_erase /dev/mtd3 0 0
Erasing 4 Kibyte @ 3d000 --  4 % complete
    (Press Ctrl+C)
[  169.581911] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  170.585907] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  171.589910] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  172.593910] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  173.597907] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  173.603480] spi-nor spi0.0: Erase operation failed.
[  173.608368] spi-nor spi0.0: Attempted to modify a protected sector.

Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index c8fa6ee18ae7..d49ab6575553 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -973,7 +973,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 		zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
 				   GQSPI_IER_GENFIFOEMPTY_MASK |
 				   GQSPI_IER_TXNOT_FULL_MASK);
-		if (!wait_for_completion_interruptible_timeout
+		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
 			err = -ETIMEDOUT;
 			kfree(tmpbuf);
@@ -1001,7 +1001,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 				   GQSPI_IER_TXEMPTY_MASK |
 				   GQSPI_IER_GENFIFOEMPTY_MASK |
 				   GQSPI_IER_TXNOT_FULL_MASK);
-		if (!wait_for_completion_interruptible_timeout
+		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
 			err = -ETIMEDOUT;
 			goto return_err;
@@ -1076,7 +1076,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 						   GQSPI_IER_RXEMPTY_MASK);
 			}
 		}
-		if (!wait_for_completion_interruptible_timeout
+		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000)))
 			err = -ETIMEDOUT;
 	}
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: quanyang.wang@windriver.com
To: Mark Brown <broonie@kernel.org>,
	Michal Simek <michal.simek@xilinx.com>,
	Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Cc: linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Quanyang Wang <quanyang.wang@windriver.com>
Subject: [PATCH 1/4] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible
Date: Thu,  8 Apr 2021 12:02:20 +0800	[thread overview]
Message-ID: <20210408040223.23134-2-quanyang.wang@windriver.com> (raw)
In-Reply-To: <20210408040223.23134-1-quanyang.wang@windriver.com>

From: Quanyang Wang <quanyang.wang@windriver.com>

When Ctrl+C occurs during the process of zynqmp_qspi_exec_op, the function
wait_for_completion_interruptible_timeout will return a non-zero value
-ERESTARTSYS immediately. This will disrupt the SPI memory operation
because the data transmitting may begin before the command or address
transmitting completes. Use wait_for_completion_timeout to prevent
the process from being interruptible.

This patch fixes the error as below:
root@xilinx-zynqmp:~# flash_erase /dev/mtd3 0 0
Erasing 4 Kibyte @ 3d000 --  4 % complete
    (Press Ctrl+C)
[  169.581911] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  170.585907] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  171.589910] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  172.593910] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  173.597907] zynqmp-qspi ff0f0000.spi: Chip select timed out
[  173.603480] spi-nor spi0.0: Erase operation failed.
[  173.608368] spi-nor spi0.0: Attempted to modify a protected sector.

Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index c8fa6ee18ae7..d49ab6575553 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -973,7 +973,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 		zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
 				   GQSPI_IER_GENFIFOEMPTY_MASK |
 				   GQSPI_IER_TXNOT_FULL_MASK);
-		if (!wait_for_completion_interruptible_timeout
+		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
 			err = -ETIMEDOUT;
 			kfree(tmpbuf);
@@ -1001,7 +1001,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 				   GQSPI_IER_TXEMPTY_MASK |
 				   GQSPI_IER_GENFIFOEMPTY_MASK |
 				   GQSPI_IER_TXNOT_FULL_MASK);
-		if (!wait_for_completion_interruptible_timeout
+		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
 			err = -ETIMEDOUT;
 			goto return_err;
@@ -1076,7 +1076,7 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 						   GQSPI_IER_RXEMPTY_MASK);
 			}
 		}
-		if (!wait_for_completion_interruptible_timeout
+		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000)))
 			err = -ETIMEDOUT;
 	}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-04-08  4:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-08  4:02 [PATCH 0/4] spi: spi-zynqmp-gpspi: fix some issues quanyang.wang
2021-04-08  4:02 ` quanyang.wang
2021-04-08  4:02 ` quanyang.wang [this message]
2021-04-08  4:02   ` [PATCH 1/4] spi: spi-zynqmp-gqspi: use wait_for_completion_timeout to make zynqmp_qspi_exec_op not interruptible quanyang.wang
2021-04-08  4:02 ` [PATCH 2/4] spi: spi-zynqmp-gqspi: add mutex locking for exec_op quanyang.wang
2021-04-08  4:02   ` quanyang.wang
2021-04-08  4:02 ` [PATCH 3/4] spi: spi-zynqmp-gqspi: transmit dummy circles by using the controller's internal functionality quanyang.wang
2021-04-08  4:02   ` quanyang.wang
2021-04-08  4:02 ` [PATCH 4/4] spi: spi-zynqmp-gqspi: fix incorrect operating mode in zynqmp_qspi_read_op quanyang.wang
2021-04-08  4:02   ` quanyang.wang
2021-04-09 16:22 ` [PATCH 0/4] spi: spi-zynqmp-gpspi: fix some issues Mark Brown
2021-04-09 16:22   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210408040223.23134-2-quanyang.wang@windriver.com \
    --to=quanyang.wang@windriver.com \
    --cc=amit.kumar-mahapatra@xilinx.com \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.