All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: netdev@vger.kernel.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Sergei Shtylyov <sergei.shtylyov@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH V4 2/2] net: ethernet: ravb: Enable optional refclk
Date: Mon, 12 Apr 2021 08:26:19 -0500	[thread overview]
Message-ID: <20210412132619.7896-2-aford173@gmail.com> (raw)
In-Reply-To: <20210412132619.7896-1-aford173@gmail.com>

For devices that use a programmable clock for the AVB reference clock,
the driver may need to enable them.  Add code to find the optional clock
and enable it when available.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>

---
V4:  Eliminate the NULL check when disabling refclk, and add a line
     to disable the refclk if there is a failure after it's been
     initialized.

V3:  Change 'avb' to 'AVB'
     Remove unnessary else statement and pointer maniupluation when
     enabling the refclock.
     Add disable_unprepare call in remove funtion.

V2:  The previous patch to fetch the fclk was dropped.  In its place
     is code to enable the refclk

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index cb47e68c1a3e..86a1eb0634e8 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -993,6 +993,7 @@ struct ravb_private {
 	struct platform_device *pdev;
 	void __iomem *addr;
 	struct clk *clk;
+	struct clk *refclk;
 	struct mdiobb_ctrl mdiobb;
 	u32 num_rx_ring[NUM_RX_QUEUE];
 	u32 num_tx_ring[NUM_TX_QUEUE];
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index eb0c03bdb12d..1409ae986aa2 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2148,6 +2148,13 @@ static int ravb_probe(struct platform_device *pdev)
 		goto out_release;
 	}
 
+	priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
+	if (IS_ERR(priv->refclk)) {
+		error = PTR_ERR(priv->refclk);
+		goto out_release;
+	}
+	clk_prepare_enable(priv->refclk);
+
 	ndev->max_mtu = 2048 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
 	ndev->min_mtu = ETH_MIN_MTU;
 
@@ -2244,6 +2251,7 @@ static int ravb_probe(struct platform_device *pdev)
 	if (chip_id != RCAR_GEN2)
 		ravb_ptp_stop(ndev);
 out_release:
+	clk_disable_unprepare(priv->refclk);
 	free_netdev(ndev);
 
 	pm_runtime_put(&pdev->dev);
@@ -2260,6 +2268,8 @@ static int ravb_remove(struct platform_device *pdev)
 	if (priv->chip_id != RCAR_GEN2)
 		ravb_ptp_stop(ndev);
 
+	clk_disable_unprepare(priv->refclk);
+
 	dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
 			  priv->desc_bat_dma);
 	/* Set reset mode */
-- 
2.17.1


  reply	other threads:[~2021-04-12 13:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-12 13:26 [PATCH V4 1/2] dt-bindings: net: renesas,etheravb: Add additional clocks Adam Ford
2021-04-12 13:26 ` Adam Ford [this message]
2021-04-13  7:33   ` [PATCH V4 2/2] net: ethernet: ravb: Enable optional refclk Geert Uytterhoeven
2021-04-14 13:07     ` Adam Ford
2021-04-14 17:59       ` Geert Uytterhoeven
2021-04-13 18:43   ` Dan Carpenter
2021-04-13 18:43     ` Dan Carpenter
2021-04-12 21:20 ` [PATCH V4 1/2] dt-bindings: net: renesas,etheravb: Add additional clocks patchwork-bot+netdevbpf
2021-04-12 23:56 [PATCH V4 2/2] net: ethernet: ravb: Enable optional refclk kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210412132619.7896-2-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.