All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-mmc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Subject: [PATCH v2] mmc: tmio: always restore irq register
Date: Tue, 13 Apr 2021 10:31:37 +0200	[thread overview]
Message-ID: <20210413083137.11171-1-wsa+renesas@sang-engineering.com> (raw)

Currently, only SDHI on R-Car Gen2+ reinitializes the irq register
during reset but it should be done on all instances. We can move it from
the SDHI driver to the TMIO core, because we now have the
'sd_irq_mask_all' variable which carries the proper value to use. That
also means we can remove the initialization from tmio_mmc_probe()
because it calls tmio_mmc_reset(), too. We only move that
tmio_mmc_reset() call there a little to ensure 'sd_irq_mask_all' is
properly set.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since v1:

* use direct register write to initialize irq register instead of
  masking bits. Also initialize the cache variable directly.

 drivers/mmc/host/renesas_sdhi_core.c |  2 --
 drivers/mmc/host/tmio_mmc_core.c     | 11 ++++++-----
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index d36181b6f687..635bf31a6735 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -588,8 +588,6 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host)
 		renesas_sdhi_scc_reset(host, priv);
 	}
 
-	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, TMIO_MASK_ALL_RCAR2);
-
 	if (sd_ctrl_read16(host, CTL_VERSION) >= SDHI_VER_GEN3_SD) {
 		val = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT);
 		val |= CARD_OPT_EXTOP;
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 0c474d78b186..7dfc26f48c18 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -192,6 +192,9 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
 	if (host->reset)
 		host->reset(host);
 
+	sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all);
+	host->sdcard_irq_mask = host->sdcard_irq_mask_all;
+
 	tmio_mmc_set_bus_width(host, host->mmc->ios.bus_width);
 
 	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
@@ -1176,13 +1179,11 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
 		_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
 
-	_host->set_clock(_host, 0);
-	tmio_mmc_reset(_host);
-
-	_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
 	if (!_host->sdcard_irq_mask_all)
 		_host->sdcard_irq_mask_all = TMIO_MASK_ALL;
-	tmio_mmc_disable_mmc_irqs(_host, _host->sdcard_irq_mask_all);
+
+	_host->set_clock(_host, 0);
+	tmio_mmc_reset(_host);
 
 	if (_host->native_hotplug)
 		tmio_mmc_enable_mmc_irqs(_host,
-- 
2.30.0


             reply	other threads:[~2021-04-13  8:31 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13  8:31 Wolfram Sang [this message]
2021-04-13 15:37 ` [PATCH v2] mmc: tmio: always restore irq register Niklas Söderlund
2021-04-15 11:54 ` Yoshihiro Shimoda
2021-04-15 12:02 ` Ulf Hansson
2021-04-15 19:58   ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413083137.11171-1-wsa+renesas@sang-engineering.com \
    --to=wsa+renesas@sang-engineering.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.