All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Robinson <pbrobinson@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Cc: Peter Robinson <pbrobinson@gmail.com>
Subject: [PATCH] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399
Date: Tue, 13 Apr 2021 15:17:09 +0100	[thread overview]
Message-ID: <20210413141709.845592-1-pbrobinson@gmail.com> (raw)

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 48ed4aaa37f3..476787027e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index fb7599f07af4..17ba7c3d9a9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -469,7 +469,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 7257494d2831..bc385ad45a13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -324,7 +324,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Peter Robinson <pbrobinson@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Cc: Peter Robinson <pbrobinson@gmail.com>
Subject: [PATCH] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399
Date: Tue, 13 Apr 2021 15:17:09 +0100	[thread overview]
Message-ID: <20210413141709.845592-1-pbrobinson@gmail.com> (raw)

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 48ed4aaa37f3..476787027e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index fb7599f07af4..17ba7c3d9a9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -469,7 +469,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 7257494d2831..bc385ad45a13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -324,7 +324,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.31.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Peter Robinson <pbrobinson@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Cc: Peter Robinson <pbrobinson@gmail.com>
Subject: [PATCH] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399
Date: Tue, 13 Apr 2021 15:17:09 +0100	[thread overview]
Message-ID: <20210413141709.845592-1-pbrobinson@gmail.com> (raw)

The max link speed supported by the rk3399 is already set in the
rk3399.dtsi file so don't set unsupported link speeds in device
specific DTs. This is the same fix as 642fb27.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi      | 1 -
 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi    | 1 -
 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 48ed4aaa37f3..476787027e03 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -504,7 +504,6 @@ &pcie_phy {
 };
 
 &pcie0 {
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index fb7599f07af4..17ba7c3d9a9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -469,7 +469,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 7257494d2831..bc385ad45a13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -324,7 +324,6 @@ &pcie_phy {
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-04-13 14:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13 14:17 Peter Robinson [this message]
2021-04-13 14:17 ` [PATCH] arm64: dts: rockchip: Use only supported PCIe link speed on rk3399 Peter Robinson
2021-04-13 14:17 ` Peter Robinson
2021-05-09 23:55 ` Heiko Stuebner
2021-05-09 23:55   ` Heiko Stuebner
2021-05-09 23:55   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413141709.845592-1-pbrobinson@gmail.com \
    --to=pbrobinson@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.