All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-renesas-soc@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH 2/2] arm64: dts: renesas: falcon-csi-dsi: Add and connect MAX96712
Date: Tue, 13 Apr 2021 20:48:44 +0200	[thread overview]
Message-ID: <20210413184844.2606086-3-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20210413184844.2606086-1-niklas.soderlund+renesas@ragnatech.se>

The sub-board contains three MAX96712 connected to the main-board using
I2C and CSI-2, record the connections. Also enable all nodes (VIN, CSI-2
and ISP) that are part of the downstream video capture pipeline.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 .../dts/renesas/r8a779a0-falcon-csi-dsi.dtsi  | 229 ++++++++++++++++++
 1 file changed, 229 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
index 928b182a76901276..fa17ceb143f47fd4 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -34,3 +34,232 @@ pca9654_c: gpio@23 {
 		#gpio-cells = <2>;
 	};
 };
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi42_in>;
+				};
+			};
+		};
+	};
+
+	gmsl2: gmsl-deserializer@6b {
+		compatible = "maxim,max96712";
+		reg = <0x6b>;
+		enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out2: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi43_in>;
+				};
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi42 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi42_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
+&csi43 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi43_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out2>;
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp2 {
+	status = "okay";
+};
+
+&isp3 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin16 {
+	status = "okay";
+};
+
+&vin17 {
+	status = "okay";
+};
+
+&vin18 {
+	status = "okay";
+};
+
+&vin19 {
+	status = "okay";
+};
+
+&vin20 {
+	status = "okay";
+};
+
+&vin21 {
+	status = "okay";
+};
+
+&vin22 {
+	status = "okay";
+};
+
+&vin23 {
+	status = "okay";
+};
+
+&vin24 {
+	status = "okay";
+};
+
+&vin25 {
+	status = "okay";
+};
+
+&vin26 {
+	status = "okay";
+};
+
+&vin27 {
+	status = "okay";
+};
+
+&vin28 {
+	status = "okay";
+};
+
+&vin29 {
+	status = "okay";
+};
+
+&vin30 {
+	status = "okay";
+};
+
+&vin31 {
+	status = "okay";
+};
-- 
2.31.1


      parent reply	other threads:[~2021-04-13 18:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13 18:48 [PATCH 0/2] arm64: dts: renesas: falcon: Wire up MAX96712 Niklas Söderlund
2021-04-13 18:48 ` [PATCH 1/2] arm64: dts: renesas: r8a779a0: Add and connect all CSI-2, ISP and VIN nodes Niklas Söderlund
2021-04-23  9:25   ` Geert Uytterhoeven
2021-04-23 12:02     ` Niklas Söderlund
2021-04-23 10:00   ` Geert Uytterhoeven
2021-04-13 18:48 ` Niklas Söderlund [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413184844.2606086-3-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=geert+renesas@glider.be \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.