From: Felipe Balbi <balbi@kernel.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Caleb Connolly <caleb@connolly.tech>,
Felipe Balbi <felipe.balbi@microsoft.com>
Subject: [PATCH v2] arm64: boot: dts: qcom: sm8150: add SPI nodes
Date: Thu, 15 Apr 2021 13:41:59 +0300 [thread overview]
Message-ID: <20210415104159.1811077-1-balbi@kernel.org> (raw)
From: Felipe Balbi <felipe.balbi@microsoft.com>
Add missing SPI nodes for SM8150.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
---
Changes since v1:
- avoid modifying drive strength on i2c. No functional
changes, just keeping 0x02 instead of 2
Tested on Microsoft Surface Duo (DTS will be sent after -rc1). This
patch also depends on i2c nodes patch by Caleb Connolly
arch/arm64/boot/dts/qcom/sm8150.dtsi | 597 +++++++++++++++++++++++++++
1 file changed, 597 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 7207a3689d9d..ee43c4337f68 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -602,6 +602,21 @@ i2c0: i2c@880000 {
status = "disabled";
};
+ spi0: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x880000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c1: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
@@ -615,6 +630,21 @@ i2c1: i2c@884000 {
status = "disabled";
};
+ spi1: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x884000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
@@ -628,6 +658,21 @@ i2c2: i2c@888000 {
status = "disabled";
};
+ spi2: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x888000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c3: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
@@ -641,6 +686,21 @@ i2c3: i2c@88c000 {
status = "disabled";
};
+ spi3: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x88c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c4: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
@@ -654,6 +714,21 @@ i2c4: i2c@890000 {
status = "disabled";
};
+ spi4: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x890000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c5: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
@@ -667,6 +742,21 @@ i2c5: i2c@894000 {
status = "disabled";
};
+ spi5: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x894000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c6: i2c@898000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00898000 0 0x4000>;
@@ -680,6 +770,21 @@ i2c6: i2c@898000 {
status = "disabled";
};
+ spi6: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x898000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c7: i2c@89c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0089c000 0 0x4000>;
@@ -693,6 +798,20 @@ i2c7: i2c@89c000 {
status = "disabled";
};
+ spi7: spi@89c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x89c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi7_default>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_1: geniqup@ac0000 {
@@ -720,6 +839,21 @@ i2c8: i2c@a80000 {
status = "disabled";
};
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa80000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c9: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
@@ -733,6 +867,21 @@ i2c9: i2c@a84000 {
status = "disabled";
};
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa84000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c10: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
@@ -746,6 +895,21 @@ i2c10: i2c@a88000 {
status = "disabled";
};
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa88000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c11: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
@@ -759,6 +923,21 @@ i2c11: i2c@a8c000 {
status = "disabled";
};
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa8c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -781,6 +960,21 @@ i2c12: i2c@a90000 {
status = "disabled";
};
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa90000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c16: i2c@94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0094000 0 0x4000>;
@@ -793,6 +987,21 @@ i2c16: i2c@94000 {
#size-cells = <0>;
status = "disabled";
};
+
+ spi16: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xa94000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi16_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qupv3_id_2: geniqup@cc0000 {
@@ -821,6 +1030,21 @@ i2c17: i2c@c80000 {
status = "disabled";
};
+ spi17: spi@c80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc80000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi17_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c18: i2c@c84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c84000 0 0x4000>;
@@ -834,6 +1058,21 @@ i2c18: i2c@c84000 {
status = "disabled";
};
+ spi18: spi@c84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc84000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi18_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c19: i2c@c88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c88000 0 0x4000>;
@@ -847,6 +1086,21 @@ i2c19: i2c@c88000 {
status = "disabled";
};
+ spi19: spi@c88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc88000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi19_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c13: i2c@c8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c8c000 0 0x4000>;
@@ -860,6 +1114,21 @@ i2c13: i2c@c8c000 {
status = "disabled";
};
+ spi13: spi@c8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc8c000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi13_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c14: i2c@c90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c90000 0 0x4000>;
@@ -873,6 +1142,21 @@ i2c14: i2c@c90000 {
status = "disabled";
};
+ spi14: spi@c90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc90000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi14_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c15: i2c@c94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c94000 0 0x4000>;
@@ -885,6 +1169,21 @@ i2c15: i2c@c94000 {
#size-cells = <0>;
status = "disabled";
};
+
+ spi15: spi@c94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xc94000 0 0x4000>;
+ reg-names = "se";
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi15_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
config_noc: interconnect@1500000 {
@@ -1222,6 +1521,19 @@ config {
};
};
+ qup_spi0_default: qup-spi0-default {
+ mux {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c1_default: qup-i2c1-default {
mux {
pins = "gpio114", "gpio115";
@@ -1235,6 +1547,21 @@ config {
};
};
+ qup_spi1_default: qup-spi1-default {
+ mux {
+ pins = "gpio114", "gpio115", "gpio116",
+ "gpio117";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio114", "gpio115", "gpio116",
+ "gpio117";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c2_default: qup-i2c2-default {
mux {
pins = "gpio126", "gpio127";
@@ -1248,6 +1575,21 @@ config {
};
};
+ qup_spi2_default: qup-spi2-default {
+ mux {
+ pins = "gpio126", "gpio127", "gpio128",
+ "gpio129";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio126", "gpio127", "gpio128",
+ "gpio129";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c3_default: qup-i2c3-default {
mux {
pins = "gpio144", "gpio145";
@@ -1261,6 +1603,21 @@ config {
};
};
+ qup_spi3_default: qup-spi3-default {
+ mux {
+ pins = "gpio144", "gpio145", "gpio146",
+ "gpio147";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio144", "gpio145", "gpio146",
+ "gpio147";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c4_default: qup-i2c4-default {
mux {
pins = "gpio51", "gpio52";
@@ -1274,6 +1631,21 @@ config {
};
};
+ qup_spi4_default: qup-spi4-default {
+ mux {
+ pins = "gpio51", "gpio52", "gpio53",
+ "gpio54";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio51", "gpio52", "gpio53",
+ "gpio54";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c5_default: qup-i2c5-default {
mux {
pins = "gpio121", "gpio122";
@@ -1287,6 +1659,21 @@ config {
};
};
+ qup_spi5_default: qup-spi5-default {
+ mux {
+ pins = "gpio119", "gpio120", "gpio121",
+ "gpio122";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio119", "gpio120", "gpio121",
+ "gpio122";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c6_default: qup-i2c6-default {
mux {
pins = "gpio6", "gpio7";
@@ -1300,6 +1687,21 @@ config {
};
};
+ qup_spi6_default: qup-spi6_default {
+ mux {
+ pins = "gpio4", "gpio5", "gpio6",
+ "gpio7";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio4", "gpio5", "gpio6",
+ "gpio7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c7_default: qup-i2c7-default {
mux {
pins = "gpio98", "gpio99";
@@ -1313,6 +1715,21 @@ config {
};
};
+ qup_spi7_default: qup-spi7_default {
+ mux {
+ pins = "gpio98", "gpio99", "gpio100",
+ "gpio101";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio98", "gpio99", "gpio100",
+ "gpio101";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c8_default: qup-i2c8-default {
mux {
pins = "gpio88", "gpio89";
@@ -1326,6 +1743,21 @@ config {
};
};
+ qup_spi8_default: qup-spi8-default {
+ mux {
+ pins = "gpio88", "gpio89", "gpio90",
+ "gpio91";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio88", "gpio89", "gpio90",
+ "gpio91";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c9_default: qup-i2c9-default {
mux {
pins = "gpio39", "gpio40";
@@ -1339,6 +1771,21 @@ config {
};
};
+ qup_spi9_default: qup-spi9-default {
+ mux {
+ pins = "gpio39", "gpio40", "gpio41",
+ "gpio42";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio39", "gpio40", "gpio41",
+ "gpio42";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c10_default: qup-i2c10-default {
mux {
pins = "gpio9", "gpio10";
@@ -1352,6 +1799,21 @@ config {
};
};
+ qup_spi10_default: qup-spi10-default {
+ mux {
+ pins = "gpio9", "gpio10", "gpio11",
+ "gpio12";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio9", "gpio10", "gpio11",
+ "gpio12";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c11_default: qup-i2c11-default {
mux {
pins = "gpio94", "gpio95";
@@ -1365,6 +1827,21 @@ config {
};
};
+ qup_spi11_default: qup-spi11-default {
+ mux {
+ pins = "gpio92", "gpio93", "gpio94",
+ "gpio95";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio92", "gpio93", "gpio94",
+ "gpio95";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c12_default: qup-i2c12-default {
mux {
pins = "gpio83", "gpio84";
@@ -1378,6 +1855,21 @@ config {
};
};
+ qup_spi12_default: qup-spi12-default {
+ mux {
+ pins = "gpio83", "gpio84", "gpio85",
+ "gpio86";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio83", "gpio84", "gpio85",
+ "gpio86";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c13_default: qup-i2c13-default {
mux {
pins = "gpio43", "gpio44";
@@ -1391,6 +1883,21 @@ config {
};
};
+ qup_spi13_default: qup-spi13-default {
+ mux {
+ pins = "gpio43", "gpio44", "gpio45",
+ "gpio46";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio43", "gpio44", "gpio45",
+ "gpio46";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c14_default: qup-i2c14-default {
mux {
pins = "gpio47", "gpio48";
@@ -1404,6 +1911,21 @@ config {
};
};
+ qup_spi14_default: qup-spi14-default {
+ mux {
+ pins = "gpio47", "gpio48", "gpio49",
+ "gpio50";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio47", "gpio48", "gpio49",
+ "gpio50";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c15_default: qup-i2c15-default {
mux {
pins = "gpio27", "gpio28";
@@ -1417,6 +1939,21 @@ config {
};
};
+ qup_spi15_default: qup-spi15-default {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c16_default: qup-i2c16-default {
mux {
pins = "gpio86", "gpio85";
@@ -1430,6 +1967,21 @@ config {
};
};
+ qup_spi16_default: qup-spi16-default {
+ mux {
+ pins = "gpio83", "gpio84", "gpio85",
+ "gpio86";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio83", "gpio84", "gpio85",
+ "gpio86";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c17_default: qup-i2c17-default {
mux {
pins = "gpio55", "gpio56";
@@ -1443,6 +1995,21 @@ config {
};
};
+ qup_spi17_default: qup-spi17-default {
+ mux {
+ pins = "gpio55", "gpio56", "gpio57",
+ "gpio58";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio55", "gpio56", "gpio57",
+ "gpio58";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c18_default: qup-i2c18-default {
mux {
pins = "gpio23", "gpio24";
@@ -1456,6 +2023,21 @@ config {
};
};
+ qup_spi18_default: qup-spi18-default {
+ mux {
+ pins = "gpio23", "gpio24", "gpio25",
+ "gpio26";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio23", "gpio24", "gpio25",
+ "gpio26";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
qup_i2c19_default: qup-i2c19-default {
mux {
pins = "gpio57", "gpio58";
@@ -1468,6 +2050,21 @@ config {
bias-disable;
};
};
+
+ qup_spi19_default: qup-spi19-default {
+ mux {
+ pins = "gpio55", "gpio56", "gpio57",
+ "gpio58";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio55", "gpio56", "gpio57",
+ "gpio58";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
--
2.31.1
next reply other threads:[~2021-04-15 10:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 10:41 Felipe Balbi [this message]
2021-04-15 18:58 ` [PATCH v2] arm64: boot: dts: qcom: sm8150: add SPI nodes Konrad Dybcio
2021-04-16 10:31 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415104159.1811077-1-balbi@kernel.org \
--to=balbi@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=caleb@connolly.tech \
--cc=devicetree@vger.kernel.org \
--cc=felipe.balbi@microsoft.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.