All of lore.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>,
	<linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 12/24] ARM: at91: pm: add self-refresh support for sama7g5
Date: Thu, 15 Apr 2021 13:49:58 +0300	[thread overview]
Message-ID: <20210415105010.569620-13-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20210415105010.569620-1-claudiu.beznea@microchip.com>

Add self-refresh support for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/mach-at91/pm.h              |   2 +
 arch/arm/mach-at91/pm_data-offsets.c |   2 +
 arch/arm/mach-at91/pm_suspend.S      | 199 +++++++++++++++++++++++++++
 3 files changed, 203 insertions(+)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index bfb260be371e..666474088d55 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,6 +12,7 @@
 #include <linux/mfd/syscon/atmel-mc.h>
 #include <soc/at91/at91sam9_ddrsdr.h>
 #include <soc/at91/at91sam9_sdramc.h>
+#include <soc/at91/sama7-ddr.h>
 
 #define AT91_MEMCTRL_MC		0
 #define AT91_MEMCTRL_SDRAMC	1
@@ -27,6 +28,7 @@
 struct at91_pm_data {
 	void __iomem *pmc;
 	void __iomem *ramc[2];
+	void __iomem *ramc_phy;
 	unsigned long uhp_udp_mask;
 	unsigned int memctrl;
 	unsigned int mode;
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 82089ff258c0..40bd4e8fe40a 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -8,6 +8,8 @@ int main(void)
 	DEFINE(PM_DATA_PMC,		offsetof(struct at91_pm_data, pmc));
 	DEFINE(PM_DATA_RAMC0,		offsetof(struct at91_pm_data, ramc[0]));
 	DEFINE(PM_DATA_RAMC1,		offsetof(struct at91_pm_data, ramc[1]));
+	DEFINE(PM_DATA_RAMC_PHY,	offsetof(struct at91_pm_data,
+						 ramc_phy));
 	DEFINE(PM_DATA_MEMCTRL,	offsetof(struct at91_pm_data, memctrl));
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 7669b32d5257..84418120ba67 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -87,6 +87,200 @@ tmp3	.req	r6
 
 	.arm
 
+#ifdef CONFIG_SOC_SAMA7
+/**
+ * Enable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
+ */
+.macro at91_sramc_self_refresh_ena
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+	ldr	r7, .pm_mode
+
+	dsb
+
+	/* Disable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+sr_ena_1:
+	/* Wait for all ports to disable. */
+	ldr	tmp1, [r2, #UDDRC_PSTAT]
+	ldr	tmp2, =UDDRC_PSTAT_ALL_PORTS
+	tst	tmp1, tmp2
+	bne	sr_ena_1
+
+	/* Switch to self-refresh. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	orr	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_ena_2:
+	/* Wait for self-refresh enter. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
+	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
+	bne	sr_ena_2
+
+	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	cmp	r7, #AT91_PM_BACKUP
+	beq	sr_ena_3
+	ldr	tmp1, [r3, #DDR3PHY_PIR]
+	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+sr_ena_3:
+	/* Power down DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power down ADDR/CMD IO. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	orr	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power down ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	orr	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
+ */
+.macro at91_sramc_self_refresh_dis
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+
+	/* Power up DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power up the output of CK and CS pins. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	bic	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power up ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+
+	/* Take DDR PHY's DLL out of bypass mode. */
+	ldr	tmp1, [r3, #DDR3PHY_PIR]
+	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* De-assert SDRAM initialization. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	bic	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Quasi-dynamic programming done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_1:
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_1
+
+	/* DLL soft-reset + DLL lock wait + ITM reset */
+	mov	tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
+			DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+sr_dis_4:
+	/* Wait for it. */
+	ldr	tmp1, [r3, #DDR3PHY_PGSR]
+	tst	tmp1, #DDR3PHY_PGSR_IDONE
+	beq	sr_dis_4
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* Assert PHY init complete enable signal. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	orr	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Programming is done. Set sw_done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_5:
+	/* Wait for it. */
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_5
+
+	/* Trigger self-refresh exit. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	bic	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_dis_6:
+	/* Wait for self-refresh exit done. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
+	cmp	tmp1, #UDDRC_STAT_OPMODE_NORMAL
+	bne	sr_dis_6
+
+	/* Enable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+	dsb
+.endm
+#else
 /**
  * Enable self-refresh
  *
@@ -228,6 +422,7 @@ sdramc_exit_sf:
 
 sr_dis_exit:
 .endm
+#endif
 
 .macro at91_pm_ulp0_mode
 	ldr	pmc, .pmc_base
@@ -668,6 +863,8 @@ ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .sramc_base
 	ldr	tmp1, [r0, #PM_DATA_RAMC1]
 	str	tmp1, .sramc1_base
+	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
+	str	tmp1, .sramc_phy_base
 	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
@@ -721,6 +918,8 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .sramc1_base:
 	.word 0
+.sramc_phy_base:
+	.word 0
 .shdwc:
 	.word 0
 .sfrbu:
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>,
	<linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 12/24] ARM: at91: pm: add self-refresh support for sama7g5
Date: Thu, 15 Apr 2021 13:49:58 +0300	[thread overview]
Message-ID: <20210415105010.569620-13-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20210415105010.569620-1-claudiu.beznea@microchip.com>

Add self-refresh support for SAMA7G5.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/mach-at91/pm.h              |   2 +
 arch/arm/mach-at91/pm_data-offsets.c |   2 +
 arch/arm/mach-at91/pm_suspend.S      | 199 +++++++++++++++++++++++++++
 3 files changed, 203 insertions(+)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index bfb260be371e..666474088d55 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,6 +12,7 @@
 #include <linux/mfd/syscon/atmel-mc.h>
 #include <soc/at91/at91sam9_ddrsdr.h>
 #include <soc/at91/at91sam9_sdramc.h>
+#include <soc/at91/sama7-ddr.h>
 
 #define AT91_MEMCTRL_MC		0
 #define AT91_MEMCTRL_SDRAMC	1
@@ -27,6 +28,7 @@
 struct at91_pm_data {
 	void __iomem *pmc;
 	void __iomem *ramc[2];
+	void __iomem *ramc_phy;
 	unsigned long uhp_udp_mask;
 	unsigned int memctrl;
 	unsigned int mode;
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 82089ff258c0..40bd4e8fe40a 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -8,6 +8,8 @@ int main(void)
 	DEFINE(PM_DATA_PMC,		offsetof(struct at91_pm_data, pmc));
 	DEFINE(PM_DATA_RAMC0,		offsetof(struct at91_pm_data, ramc[0]));
 	DEFINE(PM_DATA_RAMC1,		offsetof(struct at91_pm_data, ramc[1]));
+	DEFINE(PM_DATA_RAMC_PHY,	offsetof(struct at91_pm_data,
+						 ramc_phy));
 	DEFINE(PM_DATA_MEMCTRL,	offsetof(struct at91_pm_data, memctrl));
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 7669b32d5257..84418120ba67 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -87,6 +87,200 @@ tmp3	.req	r6
 
 	.arm
 
+#ifdef CONFIG_SOC_SAMA7
+/**
+ * Enable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
+ */
+.macro at91_sramc_self_refresh_ena
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+	ldr	r7, .pm_mode
+
+	dsb
+
+	/* Disable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+sr_ena_1:
+	/* Wait for all ports to disable. */
+	ldr	tmp1, [r2, #UDDRC_PSTAT]
+	ldr	tmp2, =UDDRC_PSTAT_ALL_PORTS
+	tst	tmp1, tmp2
+	bne	sr_ena_1
+
+	/* Switch to self-refresh. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	orr	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_ena_2:
+	/* Wait for self-refresh enter. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
+	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
+	bne	sr_ena_2
+
+	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	cmp	r7, #AT91_PM_BACKUP
+	beq	sr_ena_3
+	ldr	tmp1, [r3, #DDR3PHY_PIR]
+	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+sr_ena_3:
+	/* Power down DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power down ADDR/CMD IO. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	orr	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power down ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	orr	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
+ */
+.macro at91_sramc_self_refresh_dis
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+
+	/* Power up DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power up the output of CK and CS pins. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	bic	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power up ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+
+	/* Take DDR PHY's DLL out of bypass mode. */
+	ldr	tmp1, [r3, #DDR3PHY_PIR]
+	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* De-assert SDRAM initialization. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	bic	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Quasi-dynamic programming done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_1:
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_1
+
+	/* DLL soft-reset + DLL lock wait + ITM reset */
+	mov	tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
+			DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+sr_dis_4:
+	/* Wait for it. */
+	ldr	tmp1, [r3, #DDR3PHY_PGSR]
+	tst	tmp1, #DDR3PHY_PGSR_IDONE
+	beq	sr_dis_4
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* Assert PHY init complete enable signal. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	orr	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Programming is done. Set sw_done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_5:
+	/* Wait for it. */
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_5
+
+	/* Trigger self-refresh exit. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	bic	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_dis_6:
+	/* Wait for self-refresh exit done. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
+	cmp	tmp1, #UDDRC_STAT_OPMODE_NORMAL
+	bne	sr_dis_6
+
+	/* Enable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+	dsb
+.endm
+#else
 /**
  * Enable self-refresh
  *
@@ -228,6 +422,7 @@ sdramc_exit_sf:
 
 sr_dis_exit:
 .endm
+#endif
 
 .macro at91_pm_ulp0_mode
 	ldr	pmc, .pmc_base
@@ -668,6 +863,8 @@ ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .sramc_base
 	ldr	tmp1, [r0, #PM_DATA_RAMC1]
 	str	tmp1, .sramc1_base
+	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
+	str	tmp1, .sramc_phy_base
 	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
@@ -721,6 +918,8 @@ ENDPROC(at91_pm_suspend_in_sram)
 	.word 0
 .sramc1_base:
 	.word 0
+.sramc_phy_base:
+	.word 0
 .shdwc:
 	.word 0
 .sfrbu:
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-04-15 10:51 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 10:49 [PATCH v3 00/24] ARM: at91: pm: add support for sama7g5 Claudiu Beznea
2021-04-15 10:49 ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 01/24] ARM: at91: pm: move pm_bu to soc_pm data structure Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 02/24] ARM: at91: pm: move the setup of soc_pm.bu->suspended Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 03/24] ARM: at91: pm: document at91_soc_pm structure Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 04/24] ARM: at91: pm: check for different controllers in at91_pm_modes_init() Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 05/24] ARM: at91: pm: do not initialize pdev Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 06/24] ARM: at91: pm: use r7 instead of tmp1 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 07/24] ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 08/24] ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 09/24] ARM: at91: pm: add support for waiting MCK1..4 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 10/24] ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 11/24] ARM: at91: ddr: add registers definitions for sama7g5's ddr Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` Claudiu Beznea [this message]
2021-04-15 10:49   ` [PATCH v3 12/24] ARM: at91: pm: add self-refresh support for sama7g5 Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 13/24] ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 14/24] ARM: at91: pm: add support for 2.5V LDO regulator control Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 15/24] ARM: at91: pm: wait for ddr power mode off Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 16/24] dt-bindings: atmel-sysreg: add bindings for sama7g5 Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 20:59   ` Rob Herring
2021-04-15 20:59     ` Rob Herring
2021-04-15 10:50 ` [PATCH v3 17/24] ARM: at91: pm: add sama7g5 ddr controller Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 18/24] ARM: at91: pm: add sama7g5 ddr phy controller Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 19/24] ARM: at91: pm: save ddr phy calibration data to securam Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 20/24] ARM: at91: pm: add backup mode support for SAMA7G5 Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 21/24] ARM: at91: pm: add sama7g5's pmc Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 22/24] ARM: at91: sama7: introduce sama7 SoC family Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 23/24] ARM: at91: pm: add pm support for SAMA7G5 Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 24/24] ARM: at91: pm: add sama7g5 shdwc Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-07-16 18:03 ` [PATCH v3 00/24] ARM: at91: pm: add support for sama7g5 Nicolas Ferre
2021-07-16 18:03   ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210415105010.569620-13-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.