All of lore.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>,
	<linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 21/24] ARM: at91: pm: add sama7g5's pmc
Date: Thu, 15 Apr 2021 13:50:07 +0300	[thread overview]
Message-ID: <20210415105010.569620-22-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20210415105010.569620-1-claudiu.beznea@microchip.com>

Add SAMA7G5's PMC to compatible list.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/mach-at91/pm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index fcb20272d65d..f4e66a7c7d18 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -897,6 +897,11 @@ static const struct pmc_info pmc_infos[] __initconst = {
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
 	},
+	{
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
+
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -912,6 +917,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
 	{ /* sentinel */ },
 };
 
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>,
	<linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 21/24] ARM: at91: pm: add sama7g5's pmc
Date: Thu, 15 Apr 2021 13:50:07 +0300	[thread overview]
Message-ID: <20210415105010.569620-22-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20210415105010.569620-1-claudiu.beznea@microchip.com>

Add SAMA7G5's PMC to compatible list.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/mach-at91/pm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index fcb20272d65d..f4e66a7c7d18 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -897,6 +897,11 @@ static const struct pmc_info pmc_infos[] __initconst = {
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
 	},
+	{
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
+
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -912,6 +917,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
 	{ /* sentinel */ },
 };
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-04-15 10:52 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 10:49 [PATCH v3 00/24] ARM: at91: pm: add support for sama7g5 Claudiu Beznea
2021-04-15 10:49 ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 01/24] ARM: at91: pm: move pm_bu to soc_pm data structure Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 02/24] ARM: at91: pm: move the setup of soc_pm.bu->suspended Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 03/24] ARM: at91: pm: document at91_soc_pm structure Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 04/24] ARM: at91: pm: check for different controllers in at91_pm_modes_init() Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 05/24] ARM: at91: pm: do not initialize pdev Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 06/24] ARM: at91: pm: use r7 instead of tmp1 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 07/24] ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 08/24] ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 09/24] ARM: at91: pm: add support for waiting MCK1..4 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 10/24] ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 11/24] ARM: at91: ddr: add registers definitions for sama7g5's ddr Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 12/24] ARM: at91: pm: add self-refresh support for sama7g5 Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:49 ` [PATCH v3 13/24] ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes Claudiu Beznea
2021-04-15 10:49   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 14/24] ARM: at91: pm: add support for 2.5V LDO regulator control Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 15/24] ARM: at91: pm: wait for ddr power mode off Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 16/24] dt-bindings: atmel-sysreg: add bindings for sama7g5 Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 20:59   ` Rob Herring
2021-04-15 20:59     ` Rob Herring
2021-04-15 10:50 ` [PATCH v3 17/24] ARM: at91: pm: add sama7g5 ddr controller Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 18/24] ARM: at91: pm: add sama7g5 ddr phy controller Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 19/24] ARM: at91: pm: save ddr phy calibration data to securam Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 20/24] ARM: at91: pm: add backup mode support for SAMA7G5 Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` Claudiu Beznea [this message]
2021-04-15 10:50   ` [PATCH v3 21/24] ARM: at91: pm: add sama7g5's pmc Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 22/24] ARM: at91: sama7: introduce sama7 SoC family Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 23/24] ARM: at91: pm: add pm support for SAMA7G5 Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-04-15 10:50 ` [PATCH v3 24/24] ARM: at91: pm: add sama7g5 shdwc Claudiu Beznea
2021-04-15 10:50   ` Claudiu Beznea
2021-07-16 18:03 ` [PATCH v3 00/24] ARM: at91: pm: add support for sama7g5 Nicolas Ferre
2021-07-16 18:03   ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210415105010.569620-22-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.