From: Neil Armstrong <narmstrong@baylibre.com>
To: jonas@kwiboo.se, jernej.skrabec@siol.net, robert.foss@linaro.org,
Laurent.pinchart@ideasonboard.com
Cc: dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/2] drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
Date: Fri, 16 Apr 2021 11:27:37 +0200 [thread overview]
Message-ID: <20210416092737.1971876-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20210416092737.1971876-1-narmstrong@baylibre.com>
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.
Disable it to avoid exposing a non-functinal bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index aad75a22dc33..2ed87cfdd735 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1103,6 +1103,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
dw_plat_data->ycbcr_420_allowed = true;
+ dw_plat_data->disable_cec = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: jonas@kwiboo.se, jernej.skrabec@siol.net, robert.foss@linaro.org,
Laurent.pinchart@ideasonboard.com
Cc: dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/2] drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
Date: Fri, 16 Apr 2021 11:27:37 +0200 [thread overview]
Message-ID: <20210416092737.1971876-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20210416092737.1971876-1-narmstrong@baylibre.com>
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.
Disable it to avoid exposing a non-functinal bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index aad75a22dc33..2ed87cfdd735 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1103,6 +1103,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
dw_plat_data->ycbcr_420_allowed = true;
+ dw_plat_data->disable_cec = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: jonas@kwiboo.se, jernej.skrabec@siol.net, robert.foss@linaro.org,
Laurent.pinchart@ideasonboard.com
Cc: linux-amlogic@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
Date: Fri, 16 Apr 2021 11:27:37 +0200 [thread overview]
Message-ID: <20210416092737.1971876-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20210416092737.1971876-1-narmstrong@baylibre.com>
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.
Disable it to avoid exposing a non-functinal bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index aad75a22dc33..2ed87cfdd735 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1103,6 +1103,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
dw_plat_data->ycbcr_420_allowed = true;
+ dw_plat_data->disable_cec = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: jonas@kwiboo.se, jernej.skrabec@siol.net, robert.foss@linaro.org,
Laurent.pinchart@ideasonboard.com
Cc: dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/2] drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
Date: Fri, 16 Apr 2021 11:27:37 +0200 [thread overview]
Message-ID: <20210416092737.1971876-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20210416092737.1971876-1-narmstrong@baylibre.com>
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.
Disable it to avoid exposing a non-functinal bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index aad75a22dc33..2ed87cfdd735 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1103,6 +1103,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
dw_plat_data->phy_data = meson_dw_hdmi;
dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
dw_plat_data->ycbcr_420_allowed = true;
+ dw_plat_data->disable_cec = true;
if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
--
2.25.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2021-04-16 9:27 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 9:27 [PATCH 0/2] drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` [PATCH 1/2] drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong [this message]
2021-04-16 9:27 ` [PATCH 2/2] drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:27 ` Neil Armstrong
2021-04-16 9:58 ` [PATCH 0/2] drm/bridge: dw-hdmi: disable loading of " Laurent Pinchart
2021-04-16 9:58 ` Laurent Pinchart
2021-04-16 9:58 ` Laurent Pinchart
2021-04-16 9:58 ` Laurent Pinchart
2021-04-16 11:38 ` Neil Armstrong
2021-04-16 11:38 ` Neil Armstrong
2021-04-16 11:38 ` Neil Armstrong
2021-04-16 11:38 ` Neil Armstrong
2021-04-17 6:31 ` Jernej Škrabec
2021-04-17 6:31 ` Jernej Škrabec
2021-04-17 6:31 ` Jernej Škrabec
2021-04-17 6:31 ` Jernej Škrabec
2021-04-20 15:13 ` Hans Verkuil
2021-04-20 15:13 ` Hans Verkuil
2021-04-20 15:13 ` Hans Verkuil
2021-04-20 15:13 ` Hans Verkuil
2021-04-20 15:19 ` Neil Armstrong
2021-04-20 15:19 ` Neil Armstrong
2021-04-20 15:19 ` Neil Armstrong
2021-04-20 15:19 ` Neil Armstrong
2021-04-20 22:49 ` Laurent Pinchart
2021-04-20 22:49 ` Laurent Pinchart
2021-04-20 22:49 ` Laurent Pinchart
2021-04-20 22:49 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210416092737.1971876-3-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robert.foss@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.