From: Alistair Francis <alistair@alistair23.me>
To: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
linux-imx@nxp.com, kernel@pengutronix.de
Cc: linux-kernel@vger.kernel.org, alistair23@gmail.com,
Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v5 9/9] ARM: dts: imx7d: remarkable2: add wacom digitizer device
Date: Mon, 19 Apr 2021 07:01:04 +1000 [thread overview]
Message-ID: <20210418210104.2876-9-alistair@alistair23.me> (raw)
In-Reply-To: <20210418210104.2876-1-alistair@alistair23.me>
Enable the wacom_i2c touchscreen for the reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 61 +++++++++++++++++++++++++
1 file changed, 61 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index c3dda2b92fe6..ea1dd41023f9 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,19 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_digitizer: regulator-digitizer {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_DIGITIZER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_digitizer_reg>;
+ pinctrl-1 = <&pinctrl_digitizer_reg>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100000>; /* 100 ms */
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -51,6 +64,28 @@ &clks {
assigned-clock-rates = <0>, <32768>;
};
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ wacom_digitizer: digitizer@9 {
+ compatible = "wacom,i2c-30";
+ reg = <0x09>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wacom>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ flip-tilt-x;
+ flip-tilt-y;
+ flip-pos-x;
+ flip-pos-y;
+ flip-distance;
+ vdd-supply = <®_digitizer>;
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -117,6 +152,25 @@ &wdog1 {
fsl,ext-reset-output;
};
+&iomuxc_lpsr {
+ pinctrl_digitizer_reg: digitizerreggrp {
+ fsl,pins = <
+ /* DIGITIZER_PWR_EN */
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14
+ >;
+ };
+
+ pinctrl_wacom: wacomgrp {
+ fsl,pins = <
+ /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x00000014 /* FWE */
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x00000074 /* PDCTB */
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x00000034 /* WACOM INT */
+ /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x00000014 /* WACOM PWR ENABLE */
+ /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x00000074 /* WACOM RESET */
+ >;
+ };
+};
+
&iomuxc {
pinctrl_brcm_reg: brcmreggrp {
fsl,pins = <
@@ -125,6 +179,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
prev parent reply other threads:[~2021-04-19 8:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-18 21:00 [PATCH v5 1/9] dt-bindings: Add Wacom to vendor bindings Alistair Francis
2021-04-18 21:00 ` [PATCH v5 2/9] dt-bindings: touchscreen: Initial commit of wacom,generic Alistair Francis
2021-04-18 21:00 ` [PATCH v5 3/9] Input: wacom_i2c - Add device tree support to wacom_i2c Alistair Francis
2021-04-18 21:00 ` [PATCH v5 4/9] Input: wacom_i2c - Add touchscren properties Alistair Francis
2021-04-18 21:01 ` [PATCH v5 5/9] Input: wacom_i2c - Add support for distance and tilt x/y Alistair Francis
2021-04-18 21:01 ` [PATCH v5 6/9] Input: wacom_i2c - Clean up the query device fields Alistair Francis
2021-04-18 21:01 ` [PATCH v5 7/9] Input: wacom_i2c - Add support for vdd regulator Alistair Francis
2021-04-18 21:01 ` [PATCH v5 8/9] ARM: imx_v6_v7_defconfig: Enable Wacom I2C Alistair Francis
2021-04-18 21:01 ` Alistair Francis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210418210104.2876-9-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=alistair23@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.