From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, Ulf Hansson <ulf.hansson@linaro.org>, Haibo Chen <haibo.chen@nxp.com>, Fabio Estevam <festevam@gmail.com>, Yangbo Lu <yangbo.lu@nxp.com>, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Adrian Hunter <adrian.hunter@intel.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, Mark Brown <broonie@kernel.org> Subject: [PATCH v1 2/6] mmc: core: Convert mmc_of_parse_voltage() to use device property API Date: Mon, 19 Apr 2021 14:24:55 +0300 [thread overview] Message-ID: <20210419112459.25241-2-andriy.shevchenko@linux.intel.com> (raw) In-Reply-To: <20210419112459.25241-1-andriy.shevchenko@linux.intel.com> mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/mmc/core/host.c | 46 +++++++++++++++++++++--------- drivers/mmc/host/mmc_spi.c | 8 +++--- drivers/mmc/host/of_mmc_spi.c | 3 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-of-esdhc.c | 2 +- include/linux/mmc/host.h | 2 +- 6 files changed, 41 insertions(+), 22 deletions(-) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index ce030c5aa53c..793c7425d0dd 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -379,44 +379,62 @@ EXPORT_SYMBOL(mmc_of_parse); /** * mmc_of_parse_voltage - return mask of supported voltages - * @np: The device node need to be parsed. + * @host: host whose properties should be parsed. * @mask: mask of voltages available for MMC/SD/SDIO * - * Parse the "voltage-ranges" DT property, returning zero if it is not + * Parse the "voltage-ranges" property, returning zero if it is not * found, negative errno if the voltage-range specification is invalid, * or one if the voltage-range is specified and successfully parsed. */ -int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask) { - const u32 *voltage_ranges; + const char *prop = "voltage-ranges"; + struct device *dev = host->parent; + u32 *voltage_ranges; int num_ranges, i; + int ret; - voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); - if (!voltage_ranges) { - pr_debug("%pOF: voltage-ranges unspecified\n", np); + if (!device_property_present(dev, prop)) { + dev_dbg(dev, "%s unspecified\n", prop); return 0; } - num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + + ret = device_property_count_u32(dev, prop); + if (ret < 0) + return ret; + + num_ranges = ret / 2; if (!num_ranges) { - pr_err("%pOF: voltage-ranges empty\n", np); + dev_err(dev, "%s empty\n", prop); return -EINVAL; } + voltage_ranges = kcalloc(2 * num_ranges, sizeof(*voltage_ranges), GFP_KERNEL); + if (!voltage_ranges) + return -ENOMEM; + + ret = device_property_read_u32_array(dev, prop, voltage_ranges, 2 * num_ranges); + if (ret) { + kfree(voltage_ranges); + return ret; + } + for (i = 0; i < num_ranges; i++) { const int j = i * 2; u32 ocr_mask; - ocr_mask = mmc_vddrange_to_ocrmask( - be32_to_cpu(voltage_ranges[j]), - be32_to_cpu(voltage_ranges[j + 1])); + ocr_mask = mmc_vddrange_to_ocrmask(voltage_ranges[j + 0], + voltage_ranges[j + 1]); if (!ocr_mask) { - pr_err("%pOF: voltage-range #%d is invalid\n", - np, i); + dev_err(dev, "range #%d in %s is invalid\n", i, prop); + kfree(voltage_ranges); return -EINVAL; } *mask |= ocr_mask; } + kfree(voltage_ranges); + return 1; } EXPORT_SYMBOL(mmc_of_parse_voltage); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 02f4fd26e76a..9776a03a10f5 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1397,6 +1397,8 @@ static int mmc_spi_probe(struct spi_device *spi) host->ones = ones; + dev_set_drvdata(&spi->dev, mmc); + /* Platform data is used to hook up things like card sensing * and power switching gpios. */ @@ -1413,8 +1415,6 @@ static int mmc_spi_probe(struct spi_device *spi) host->powerup_msecs = 250; } - dev_set_drvdata(&spi->dev, mmc); - /* preallocate dma buffers */ host->data = kmalloc(sizeof(*host->data), GFP_KERNEL); if (!host->data) @@ -1494,8 +1494,8 @@ static int mmc_spi_probe(struct spi_device *spi) fail_dma: kfree(host->data); fail_nobuf1: - mmc_free_host(mmc); mmc_spi_put_pdata(spi); + mmc_free_host(mmc); nomem: kfree(ones); return status; @@ -1518,8 +1518,8 @@ static int mmc_spi_remove(struct spi_device *spi) kfree(host->ones); spi->max_speed_hz = mmc->f_max; - mmc_free_host(mmc); mmc_spi_put_pdata(spi); + mmc_free_host(mmc); return 0; } diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index 3c4d950a4755..acd96ea399b8 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -54,6 +54,7 @@ static void of_mmc_spi_exit(struct device *dev, void *mmc) struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) { + struct mmc_host *mmc = dev_get_drvdata(&spi->dev); struct device *dev = &spi->dev; struct device_node *np = dev->of_node; struct of_mmc_spi *oms; @@ -65,7 +66,7 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) if (!oms) return NULL; - if (mmc_of_parse_voltage(np, &oms->pdata.ocr_mask) <= 0) + if (mmc_of_parse_voltage(mmc, &oms->pdata.ocr_mask) <= 0) goto err_ocr; oms->detect_irq = irq_of_parse_and_map(np, 0); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index a20459744d21..f39d85e8ea6d 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1486,7 +1486,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) boarddata->delay_line = 0; - mmc_of_parse_voltage(np, &host->ocr_mask); + mmc_of_parse_voltage(host->mmc, &host->ocr_mask); if (esdhc_is_usdhc(imx_data)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index ab5ab969f711..a593b1fbd69e 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -1489,7 +1489,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) if (ret) goto err; - mmc_of_parse_voltage(np, &host->ocr_mask); + mmc_of_parse_voltage(host->mmc, &host->ocr_mask); ret = sdhci_add_host(host); if (ret) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 26a3c7bc29ae..ecd25a3b37f0 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -514,7 +514,7 @@ void mmc_free_host(struct mmc_host *); void mmc_of_parse_clk_phase(struct mmc_host *host, struct mmc_clk_phase_map *map); int mmc_of_parse(struct mmc_host *host); -int mmc_of_parse_voltage(struct device_node *np, u32 *mask); +int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask); static inline void *mmc_priv(struct mmc_host *host) { -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, Ulf Hansson <ulf.hansson@linaro.org>, Haibo Chen <haibo.chen@nxp.com>, Fabio Estevam <festevam@gmail.com>, Yangbo Lu <yangbo.lu@nxp.com>, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Adrian Hunter <adrian.hunter@intel.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, Mark Brown <broonie@kernel.org> Subject: [PATCH v1 2/6] mmc: core: Convert mmc_of_parse_voltage() to use device property API Date: Mon, 19 Apr 2021 14:24:55 +0300 [thread overview] Message-ID: <20210419112459.25241-2-andriy.shevchenko@linux.intel.com> (raw) In-Reply-To: <20210419112459.25241-1-andriy.shevchenko@linux.intel.com> mmc_of_parse() for a few years has been using device property API. Convert mmc_of_parse_voltage() as well. At the same time switch users to new API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/mmc/core/host.c | 46 +++++++++++++++++++++--------- drivers/mmc/host/mmc_spi.c | 8 +++--- drivers/mmc/host/of_mmc_spi.c | 3 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-of-esdhc.c | 2 +- include/linux/mmc/host.h | 2 +- 6 files changed, 41 insertions(+), 22 deletions(-) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index ce030c5aa53c..793c7425d0dd 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -379,44 +379,62 @@ EXPORT_SYMBOL(mmc_of_parse); /** * mmc_of_parse_voltage - return mask of supported voltages - * @np: The device node need to be parsed. + * @host: host whose properties should be parsed. * @mask: mask of voltages available for MMC/SD/SDIO * - * Parse the "voltage-ranges" DT property, returning zero if it is not + * Parse the "voltage-ranges" property, returning zero if it is not * found, negative errno if the voltage-range specification is invalid, * or one if the voltage-range is specified and successfully parsed. */ -int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask) { - const u32 *voltage_ranges; + const char *prop = "voltage-ranges"; + struct device *dev = host->parent; + u32 *voltage_ranges; int num_ranges, i; + int ret; - voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); - if (!voltage_ranges) { - pr_debug("%pOF: voltage-ranges unspecified\n", np); + if (!device_property_present(dev, prop)) { + dev_dbg(dev, "%s unspecified\n", prop); return 0; } - num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + + ret = device_property_count_u32(dev, prop); + if (ret < 0) + return ret; + + num_ranges = ret / 2; if (!num_ranges) { - pr_err("%pOF: voltage-ranges empty\n", np); + dev_err(dev, "%s empty\n", prop); return -EINVAL; } + voltage_ranges = kcalloc(2 * num_ranges, sizeof(*voltage_ranges), GFP_KERNEL); + if (!voltage_ranges) + return -ENOMEM; + + ret = device_property_read_u32_array(dev, prop, voltage_ranges, 2 * num_ranges); + if (ret) { + kfree(voltage_ranges); + return ret; + } + for (i = 0; i < num_ranges; i++) { const int j = i * 2; u32 ocr_mask; - ocr_mask = mmc_vddrange_to_ocrmask( - be32_to_cpu(voltage_ranges[j]), - be32_to_cpu(voltage_ranges[j + 1])); + ocr_mask = mmc_vddrange_to_ocrmask(voltage_ranges[j + 0], + voltage_ranges[j + 1]); if (!ocr_mask) { - pr_err("%pOF: voltage-range #%d is invalid\n", - np, i); + dev_err(dev, "range #%d in %s is invalid\n", i, prop); + kfree(voltage_ranges); return -EINVAL; } *mask |= ocr_mask; } + kfree(voltage_ranges); + return 1; } EXPORT_SYMBOL(mmc_of_parse_voltage); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 02f4fd26e76a..9776a03a10f5 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1397,6 +1397,8 @@ static int mmc_spi_probe(struct spi_device *spi) host->ones = ones; + dev_set_drvdata(&spi->dev, mmc); + /* Platform data is used to hook up things like card sensing * and power switching gpios. */ @@ -1413,8 +1415,6 @@ static int mmc_spi_probe(struct spi_device *spi) host->powerup_msecs = 250; } - dev_set_drvdata(&spi->dev, mmc); - /* preallocate dma buffers */ host->data = kmalloc(sizeof(*host->data), GFP_KERNEL); if (!host->data) @@ -1494,8 +1494,8 @@ static int mmc_spi_probe(struct spi_device *spi) fail_dma: kfree(host->data); fail_nobuf1: - mmc_free_host(mmc); mmc_spi_put_pdata(spi); + mmc_free_host(mmc); nomem: kfree(ones); return status; @@ -1518,8 +1518,8 @@ static int mmc_spi_remove(struct spi_device *spi) kfree(host->ones); spi->max_speed_hz = mmc->f_max; - mmc_free_host(mmc); mmc_spi_put_pdata(spi); + mmc_free_host(mmc); return 0; } diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index 3c4d950a4755..acd96ea399b8 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -54,6 +54,7 @@ static void of_mmc_spi_exit(struct device *dev, void *mmc) struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) { + struct mmc_host *mmc = dev_get_drvdata(&spi->dev); struct device *dev = &spi->dev; struct device_node *np = dev->of_node; struct of_mmc_spi *oms; @@ -65,7 +66,7 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) if (!oms) return NULL; - if (mmc_of_parse_voltage(np, &oms->pdata.ocr_mask) <= 0) + if (mmc_of_parse_voltage(mmc, &oms->pdata.ocr_mask) <= 0) goto err_ocr; oms->detect_irq = irq_of_parse_and_map(np, 0); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index a20459744d21..f39d85e8ea6d 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1486,7 +1486,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) boarddata->delay_line = 0; - mmc_of_parse_voltage(np, &host->ocr_mask); + mmc_of_parse_voltage(host->mmc, &host->ocr_mask); if (esdhc_is_usdhc(imx_data)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index ab5ab969f711..a593b1fbd69e 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -1489,7 +1489,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) if (ret) goto err; - mmc_of_parse_voltage(np, &host->ocr_mask); + mmc_of_parse_voltage(host->mmc, &host->ocr_mask); ret = sdhci_add_host(host); if (ret) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 26a3c7bc29ae..ecd25a3b37f0 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -514,7 +514,7 @@ void mmc_free_host(struct mmc_host *); void mmc_of_parse_clk_phase(struct mmc_host *host, struct mmc_clk_phase_map *map); int mmc_of_parse(struct mmc_host *host); -int mmc_of_parse_voltage(struct device_node *np, u32 *mask); +int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask); static inline void *mmc_priv(struct mmc_host *host) { -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-19 11:25 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-19 11:24 [PATCH v1 1/6] mmc: core: Correct descriptions in mmc_of_parse() Andy Shevchenko 2021-04-19 11:24 ` Andy Shevchenko 2021-04-19 11:24 ` Andy Shevchenko [this message] 2021-04-19 11:24 ` [PATCH v1 2/6] mmc: core: Convert mmc_of_parse_voltage() to use device property API Andy Shevchenko 2021-04-19 11:24 ` [PATCH v1 3/6] mmc: mmc_spi: Set up polling even if voltage-ranges is not present Andy Shevchenko 2021-04-19 11:24 ` Andy Shevchenko 2021-04-19 11:24 ` [PATCH v1 4/6] mmc: mmc_spi: Drop unused NO_IRQ definition Andy Shevchenko 2021-04-19 11:24 ` Andy Shevchenko 2021-04-19 11:24 ` [PATCH v1 5/6] mmc: mmc_spi: Use already parsed IRQ Andy Shevchenko 2021-04-19 11:24 ` Andy Shevchenko 2021-04-19 11:24 ` [PATCH v1 6/6] mmc: mmc_spi: Make of_mmc_spi.c resource provider agnostic Andy Shevchenko 2021-04-19 11:24 ` Andy Shevchenko 2021-04-19 12:59 ` [PATCH v1 1/6] mmc: core: Correct descriptions in mmc_of_parse() Ulf Hansson 2021-04-19 12:59 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210419112459.25241-2-andriy.shevchenko@linux.intel.com \ --to=andriy.shevchenko@linux.intel.com \ --cc=adrian.hunter@intel.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=haibo.chen@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=ulf.hansson@linaro.org \ --cc=yangbo.lu@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.