From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
To: Felix Fietkau <nbd@nbd.name>, John Crispin <john@phrozen.org>,
Sean Wang <sean.wang@mediatek.com>,
Mark Lee <Mark-MC.Lee@mediatek.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Subject: [PATCH net-next 14/14] net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init
Date: Wed, 21 Apr 2021 21:09:14 -0700 [thread overview]
Message-ID: <20210422040914.47788-15-ilya.lipnitskiy@gmail.com> (raw)
In-Reply-To: <20210422040914.47788-1-ilya.lipnitskiy@gmail.com>
Replace a tight busy-wait loop without a pause with a standard
readx_poll_timeout_atomic routine with a 5 us poll period.
Tested by booting a MT7621 device to ensure the driver initializes
properly.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 29 +++++++++------------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
2 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8c863322587e..720d73d0c007 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2037,25 +2037,22 @@ static int mtk_set_features(struct net_device *dev, netdev_features_t features)
/* wait for DMA to finish whatever it is doing before we start using it again */
static int mtk_dma_busy_wait(struct mtk_eth *eth)
{
- unsigned long t_start = jiffies;
+ u32 val;
+ int ret;
+ unsigned int reg;
- while (1) {
- if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- if (!(mtk_r32(eth, MTK_QDMA_GLO_CFG) &
- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
- return 0;
- } else {
- if (!(mtk_r32(eth, MTK_PDMA_GLO_CFG) &
- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
- return 0;
- }
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
+ reg = MTK_QDMA_GLO_CFG;
+ else
+ reg = MTK_PDMA_GLO_CFG;
- if (time_after(jiffies, t_start + MTK_DMA_BUSY_TIMEOUT))
- break;
- }
+ ret = readx_poll_timeout_atomic(__raw_readl, eth->base + reg, val,
+ !(val & (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)),
+ 5, MTK_DMA_BUSY_TIMEOUT_US);
+ if (ret)
+ dev_err(eth->dev, "DMA init timeout\n");
- dev_err(eth->dev, "DMA init timeout\n");
- return -1;
+ return ret;
}
static int mtk_dma_init(struct mtk_eth *eth)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 214da569e869..2e4356ccf778 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -214,7 +214,7 @@
#define MTK_TX_DMA_BUSY BIT(1)
#define MTK_RX_DMA_EN BIT(2)
#define MTK_TX_DMA_EN BIT(0)
-#define MTK_DMA_BUSY_TIMEOUT HZ
+#define MTK_DMA_BUSY_TIMEOUT_US 1000000
/* QDMA Reset Index Register */
#define MTK_QDMA_RST_IDX 0x1A08
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
To: Felix Fietkau <nbd@nbd.name>, John Crispin <john@phrozen.org>,
Sean Wang <sean.wang@mediatek.com>,
Mark Lee <Mark-MC.Lee@mediatek.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Subject: [PATCH net-next 14/14] net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init
Date: Wed, 21 Apr 2021 21:09:14 -0700 [thread overview]
Message-ID: <20210422040914.47788-15-ilya.lipnitskiy@gmail.com> (raw)
In-Reply-To: <20210422040914.47788-1-ilya.lipnitskiy@gmail.com>
Replace a tight busy-wait loop without a pause with a standard
readx_poll_timeout_atomic routine with a 5 us poll period.
Tested by booting a MT7621 device to ensure the driver initializes
properly.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 29 +++++++++------------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
2 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8c863322587e..720d73d0c007 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2037,25 +2037,22 @@ static int mtk_set_features(struct net_device *dev, netdev_features_t features)
/* wait for DMA to finish whatever it is doing before we start using it again */
static int mtk_dma_busy_wait(struct mtk_eth *eth)
{
- unsigned long t_start = jiffies;
+ u32 val;
+ int ret;
+ unsigned int reg;
- while (1) {
- if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- if (!(mtk_r32(eth, MTK_QDMA_GLO_CFG) &
- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
- return 0;
- } else {
- if (!(mtk_r32(eth, MTK_PDMA_GLO_CFG) &
- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
- return 0;
- }
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
+ reg = MTK_QDMA_GLO_CFG;
+ else
+ reg = MTK_PDMA_GLO_CFG;
- if (time_after(jiffies, t_start + MTK_DMA_BUSY_TIMEOUT))
- break;
- }
+ ret = readx_poll_timeout_atomic(__raw_readl, eth->base + reg, val,
+ !(val & (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)),
+ 5, MTK_DMA_BUSY_TIMEOUT_US);
+ if (ret)
+ dev_err(eth->dev, "DMA init timeout\n");
- dev_err(eth->dev, "DMA init timeout\n");
- return -1;
+ return ret;
}
static int mtk_dma_init(struct mtk_eth *eth)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 214da569e869..2e4356ccf778 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -214,7 +214,7 @@
#define MTK_TX_DMA_BUSY BIT(1)
#define MTK_RX_DMA_EN BIT(2)
#define MTK_TX_DMA_EN BIT(0)
-#define MTK_DMA_BUSY_TIMEOUT HZ
+#define MTK_DMA_BUSY_TIMEOUT_US 1000000
/* QDMA Reset Index Register */
#define MTK_QDMA_RST_IDX 0x1A08
--
2.31.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
To: Felix Fietkau <nbd@nbd.name>, John Crispin <john@phrozen.org>,
Sean Wang <sean.wang@mediatek.com>,
Mark Lee <Mark-MC.Lee@mediatek.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Subject: [PATCH net-next 14/14] net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init
Date: Wed, 21 Apr 2021 21:09:14 -0700 [thread overview]
Message-ID: <20210422040914.47788-15-ilya.lipnitskiy@gmail.com> (raw)
In-Reply-To: <20210422040914.47788-1-ilya.lipnitskiy@gmail.com>
Replace a tight busy-wait loop without a pause with a standard
readx_poll_timeout_atomic routine with a 5 us poll period.
Tested by booting a MT7621 device to ensure the driver initializes
properly.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 29 +++++++++------------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
2 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8c863322587e..720d73d0c007 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2037,25 +2037,22 @@ static int mtk_set_features(struct net_device *dev, netdev_features_t features)
/* wait for DMA to finish whatever it is doing before we start using it again */
static int mtk_dma_busy_wait(struct mtk_eth *eth)
{
- unsigned long t_start = jiffies;
+ u32 val;
+ int ret;
+ unsigned int reg;
- while (1) {
- if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
- if (!(mtk_r32(eth, MTK_QDMA_GLO_CFG) &
- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
- return 0;
- } else {
- if (!(mtk_r32(eth, MTK_PDMA_GLO_CFG) &
- (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)))
- return 0;
- }
+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
+ reg = MTK_QDMA_GLO_CFG;
+ else
+ reg = MTK_PDMA_GLO_CFG;
- if (time_after(jiffies, t_start + MTK_DMA_BUSY_TIMEOUT))
- break;
- }
+ ret = readx_poll_timeout_atomic(__raw_readl, eth->base + reg, val,
+ !(val & (MTK_RX_DMA_BUSY | MTK_TX_DMA_BUSY)),
+ 5, MTK_DMA_BUSY_TIMEOUT_US);
+ if (ret)
+ dev_err(eth->dev, "DMA init timeout\n");
- dev_err(eth->dev, "DMA init timeout\n");
- return -1;
+ return ret;
}
static int mtk_dma_init(struct mtk_eth *eth)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 214da569e869..2e4356ccf778 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -214,7 +214,7 @@
#define MTK_TX_DMA_BUSY BIT(1)
#define MTK_RX_DMA_EN BIT(2)
#define MTK_TX_DMA_EN BIT(0)
-#define MTK_DMA_BUSY_TIMEOUT HZ
+#define MTK_DMA_BUSY_TIMEOUT_US 1000000
/* QDMA Reset Index Register */
#define MTK_QDMA_RST_IDX 0x1A08
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-22 4:11 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-22 4:09 [PATCH net-next 00/14] mtk_eth_soc: fixes and performance improvements Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 01/14] net: ethernet: mtk_eth_soc: fix RX VLAN offload Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 02/14] net: ethernet: mtk_eth_soc: unmap RX data before calling build_skb Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 03/14] net: ethernet: mtk_eth_soc: fix build_skb cleanup Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 04/14] net: ethernet: mtk_eth_soc: use napi_consume_skb Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 05/14] net: ethernet: mtk_eth_soc: reduce MDIO bus access latency Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 12:18 ` Andrew Lunn
2021-04-22 12:18 ` Andrew Lunn
2021-04-22 12:18 ` Andrew Lunn
2021-04-22 12:33 ` Felix Fietkau
2021-04-22 12:33 ` Felix Fietkau
2021-04-22 12:33 ` Felix Fietkau
2021-04-23 4:16 ` Ilya Lipnitskiy
2021-04-23 4:16 ` Ilya Lipnitskiy
2021-04-23 4:16 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 06/14] net: ethernet: mtk_eth_soc: remove unnecessary TX queue stops Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 07/14] net: ethernet: mtk_eth_soc: use larger burst size for QDMA TX Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 08/14] net: ethernet: mtk_eth_soc: increase DMA ring sizes Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 09/14] net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 10/14] net: ethernet: mtk_eth_soc: cache HW pointer of last freed TX descriptor Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 11/14] net: ethernet: mtk_eth_soc: only read the full RX descriptor if DMA is done Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 12/14] net: ethernet: mtk_eth_soc: reduce unnecessary interrupts Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 16:26 ` Jakub Kicinski
2021-04-22 16:26 ` Jakub Kicinski
2021-04-22 16:26 ` Jakub Kicinski
2021-04-23 4:20 ` Ilya Lipnitskiy
2021-04-23 4:20 ` Ilya Lipnitskiy
2021-04-23 4:20 ` Ilya Lipnitskiy
2021-04-22 4:09 ` [PATCH net-next 13/14] net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash if present Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy [this message]
2021-04-22 4:09 ` [PATCH net-next 14/14] net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init Ilya Lipnitskiy
2021-04-22 4:09 ` Ilya Lipnitskiy
2021-04-22 12:20 ` Andrew Lunn
2021-04-22 12:20 ` Andrew Lunn
2021-04-22 12:20 ` Andrew Lunn
2021-04-22 12:23 ` [PATCH net-next 00/14] mtk_eth_soc: fixes and performance improvements Andrew Lunn
2021-04-22 12:23 ` Andrew Lunn
2021-04-22 12:23 ` Andrew Lunn
2021-04-23 4:18 ` Ilya Lipnitskiy
2021-04-23 4:18 ` Ilya Lipnitskiy
2021-04-23 4:18 ` Ilya Lipnitskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210422040914.47788-15-ilya.lipnitskiy@gmail.com \
--to=ilya.lipnitskiy@gmail.com \
--cc=Mark-MC.Lee@mediatek.com \
--cc=davem@davemloft.net \
--cc=john@phrozen.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.