From: <patrice.chotard@foss.st.com> To: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <alexandre.torgue@foss.st.com> Cc: <mcoquelin.stm32@gmail.com>, <linux-stm32@st-md-mailman.stormreply.com>, <linux@armlinux.org.uk>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, Patrice Chotard <patrice.chotard@foss.st.com>, Christophe Kerello <christophe.kerello@st.com> Subject: [1/1] ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 Date: Mon, 26 Apr 2021 12:39:56 +0200 [thread overview] Message-ID: <20210426103956.29007-1-patrice.chotard@foss.st.com> (raw) From: Patrice Chotard <patrice.chotard@foss.st.com> Configure qspi's mdma from buffer transfer (max 128 bytes) to block transfer (max 64K bytes). mtd_speedtest shows that write throughtput increases : - from 734 to 782 KiB/s (~6.5%) with s25fl512s SPI-NOR. - from 4848 to 5319 KiB/s (~9.72%) with Micron SPI-NAND. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..cb326c1e12bc 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1358,8 +1358,8 @@ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>, - <&mdma1 22 0x2 0x100008 0x0 0x0>; + dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>, + <&mdma1 22 0x2 0x10100008 0x0 0x0>; dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: <patrice.chotard@foss.st.com> To: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <alexandre.torgue@foss.st.com> Cc: <mcoquelin.stm32@gmail.com>, <linux-stm32@st-md-mailman.stormreply.com>, <linux@armlinux.org.uk>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, Patrice Chotard <patrice.chotard@foss.st.com>, Christophe Kerello <christophe.kerello@st.com> Subject: [1/1] ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 Date: Mon, 26 Apr 2021 12:39:56 +0200 [thread overview] Message-ID: <20210426103956.29007-1-patrice.chotard@foss.st.com> (raw) From: Patrice Chotard <patrice.chotard@foss.st.com> Configure qspi's mdma from buffer transfer (max 128 bytes) to block transfer (max 64K bytes). mtd_speedtest shows that write throughtput increases : - from 734 to 782 KiB/s (~6.5%) with s25fl512s SPI-NOR. - from 4848 to 5319 KiB/s (~9.72%) with Micron SPI-NAND. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..cb326c1e12bc 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1358,8 +1358,8 @@ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>, - <&mdma1 22 0x2 0x100008 0x0 0x0>; + dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>, + <&mdma1 22 0x2 0x10100008 0x0 0x0>; dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-04-26 10:40 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-04-26 10:39 patrice.chotard [this message] 2021-04-26 10:39 ` [1/1] ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151 patrice.chotard 2021-04-26 10:44 ` Patrice CHOTARD 2021-04-26 10:44 ` Patrice CHOTARD
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210426103956.29007-1-patrice.chotard@foss.st.com \ --to=patrice.chotard@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=christophe.kerello@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux@armlinux.org.uk \ --cc=mark.rutland@arm.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.