All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, airlied@linux.ie,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	kraxel@redhat.com, corbet@lwn.net, lgirdwood@gmail.com,
	broonie@kernel.org, sam@ravnborg.org, robh@kernel.org,
	emil.l.velikov@gmail.com, geert+renesas@glider.be,
	hdegoede@redhat.com, bluescreen_avenger@verizon.net,
	gregkh@linuxfoundation.org
Cc: dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org,
	virtualization@lists.linux-foundation.org,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v5 9/9] drm/simpledrm: Acquire memory aperture for framebuffer
Date: Fri, 30 Apr 2021 12:58:40 +0200	[thread overview]
Message-ID: <20210430105840.30515-10-tzimmermann@suse.de> (raw)
In-Reply-To: <20210430105840.30515-1-tzimmermann@suse.de>

We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.

The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.

v4:
	* convert to drm_aperture_acquire_from_firmware()
v3:
	* use platform_device_unregister() and handle detachment
	  like hot-unplug event (Daniel)
v2:
	* adapt to aperture changes
	* use drm_dev_unplug() and drm_dev_enter/exit()
	* don't split error string

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
---
 drivers/gpu/drm/tiny/simpledrm.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 9d522473cd7c..2bdb477d9326 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -6,6 +6,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
+#include <drm/drm_aperture.h>
 #include <drm/drm_atomic_state_helper.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_damage_helper.h>
@@ -517,14 +518,23 @@ static int simpledrm_device_init_fb(struct simpledrm_device *sdev)
 
 static int simpledrm_device_init_mm(struct simpledrm_device *sdev)
 {
+	struct drm_device *dev = &sdev->dev;
 	struct platform_device *pdev = sdev->pdev;
 	struct resource *mem;
 	void __iomem *screen_base;
+	int ret;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem)
 		return -EINVAL;
 
+	ret = devm_aperture_acquire_from_firmware(dev, mem->start, resource_size(mem));
+	if (ret) {
+		drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
+			mem->start, mem->end, ret);
+		return ret;
+	}
+
 	screen_base = devm_ioremap_wc(&pdev->dev, mem->start,
 				      resource_size(mem));
 	if (!screen_base)
@@ -625,12 +635,18 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	struct drm_framebuffer *fb = plane_state->fb;
 	void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */
+	struct drm_device *dev = &sdev->dev;
+	int idx;
 
 	if (!fb)
 		return;
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	drm_fb_blit_dstclip(sdev->screen_base, sdev->pitch,
 			    sdev->format->format, vmap, fb);
+	drm_dev_exit(idx);
 }
 
 static void
@@ -658,7 +674,9 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */
 	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_device *dev = &sdev->dev;
 	struct drm_rect clip;
+	int idx;
 
 	if (!fb)
 		return;
@@ -666,8 +684,13 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 	if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip))
 		return;
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	drm_fb_blit_rect_dstclip(sdev->screen_base, sdev->pitch,
 				 sdev->format->format, vmap, fb, &clip);
+
+	drm_dev_exit(idx);
 }
 
 static const struct drm_simple_display_pipe_funcs
@@ -847,7 +870,7 @@ static int simpledrm_remove(struct platform_device *pdev)
 	struct simpledrm_device *sdev = platform_get_drvdata(pdev);
 	struct drm_device *dev = &sdev->dev;
 
-	drm_dev_unregister(dev);
+	drm_dev_unplug(dev);
 
 	return 0;
 }
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, airlied@linux.ie,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	kraxel@redhat.com, corbet@lwn.net, lgirdwood@gmail.com,
	broonie@kernel.org, sam@ravnborg.org, robh@kernel.org,
	emil.l.velikov@gmail.com, geert+renesas@glider.be,
	hdegoede@redhat.com, bluescreen_avenger@verizon.net,
	gregkh@linuxfoundation.org
Cc: Maxime Ripard <maxime@cerno.tech>,
	virtualization@lists.linux-foundation.org,
	Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org
Subject: [PATCH v5 9/9] drm/simpledrm: Acquire memory aperture for framebuffer
Date: Fri, 30 Apr 2021 12:58:40 +0200	[thread overview]
Message-ID: <20210430105840.30515-10-tzimmermann@suse.de> (raw)
In-Reply-To: <20210430105840.30515-1-tzimmermann@suse.de>

We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.

The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.

v4:
	* convert to drm_aperture_acquire_from_firmware()
v3:
	* use platform_device_unregister() and handle detachment
	  like hot-unplug event (Daniel)
v2:
	* adapt to aperture changes
	* use drm_dev_unplug() and drm_dev_enter/exit()
	* don't split error string

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
---
 drivers/gpu/drm/tiny/simpledrm.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 9d522473cd7c..2bdb477d9326 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -6,6 +6,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
+#include <drm/drm_aperture.h>
 #include <drm/drm_atomic_state_helper.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_damage_helper.h>
@@ -517,14 +518,23 @@ static int simpledrm_device_init_fb(struct simpledrm_device *sdev)
 
 static int simpledrm_device_init_mm(struct simpledrm_device *sdev)
 {
+	struct drm_device *dev = &sdev->dev;
 	struct platform_device *pdev = sdev->pdev;
 	struct resource *mem;
 	void __iomem *screen_base;
+	int ret;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem)
 		return -EINVAL;
 
+	ret = devm_aperture_acquire_from_firmware(dev, mem->start, resource_size(mem));
+	if (ret) {
+		drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
+			mem->start, mem->end, ret);
+		return ret;
+	}
+
 	screen_base = devm_ioremap_wc(&pdev->dev, mem->start,
 				      resource_size(mem));
 	if (!screen_base)
@@ -625,12 +635,18 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	struct drm_framebuffer *fb = plane_state->fb;
 	void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */
+	struct drm_device *dev = &sdev->dev;
+	int idx;
 
 	if (!fb)
 		return;
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	drm_fb_blit_dstclip(sdev->screen_base, sdev->pitch,
 			    sdev->format->format, vmap, fb);
+	drm_dev_exit(idx);
 }
 
 static void
@@ -658,7 +674,9 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */
 	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_device *dev = &sdev->dev;
 	struct drm_rect clip;
+	int idx;
 
 	if (!fb)
 		return;
@@ -666,8 +684,13 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 	if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip))
 		return;
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	drm_fb_blit_rect_dstclip(sdev->screen_base, sdev->pitch,
 				 sdev->format->format, vmap, fb, &clip);
+
+	drm_dev_exit(idx);
 }
 
 static const struct drm_simple_display_pipe_funcs
@@ -847,7 +870,7 @@ static int simpledrm_remove(struct platform_device *pdev)
 	struct simpledrm_device *sdev = platform_get_drvdata(pdev);
 	struct drm_device *dev = &sdev->dev;
 
-	drm_dev_unregister(dev);
+	drm_dev_unplug(dev);
 
 	return 0;
 }
-- 
2.31.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

WARNING: multiple messages have this Message-ID (diff)
From: Thomas Zimmermann <tzimmermann@suse.de>
To: daniel@ffwll.ch, airlied@linux.ie,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	kraxel@redhat.com, corbet@lwn.net, lgirdwood@gmail.com,
	broonie@kernel.org, sam@ravnborg.org, robh@kernel.org,
	emil.l.velikov@gmail.com, geert+renesas@glider.be,
	hdegoede@redhat.com, bluescreen_avenger@verizon.net,
	gregkh@linuxfoundation.org
Cc: Maxime Ripard <maxime@cerno.tech>,
	virtualization@lists.linux-foundation.org,
	Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org
Subject: [PATCH v5 9/9] drm/simpledrm: Acquire memory aperture for framebuffer
Date: Fri, 30 Apr 2021 12:58:40 +0200	[thread overview]
Message-ID: <20210430105840.30515-10-tzimmermann@suse.de> (raw)
In-Reply-To: <20210430105840.30515-1-tzimmermann@suse.de>

We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.

The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.

v4:
	* convert to drm_aperture_acquire_from_firmware()
v3:
	* use platform_device_unregister() and handle detachment
	  like hot-unplug event (Daniel)
v2:
	* adapt to aperture changes
	* use drm_dev_unplug() and drm_dev_enter/exit()
	* don't split error string

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
---
 drivers/gpu/drm/tiny/simpledrm.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 9d522473cd7c..2bdb477d9326 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -6,6 +6,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
+#include <drm/drm_aperture.h>
 #include <drm/drm_atomic_state_helper.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_damage_helper.h>
@@ -517,14 +518,23 @@ static int simpledrm_device_init_fb(struct simpledrm_device *sdev)
 
 static int simpledrm_device_init_mm(struct simpledrm_device *sdev)
 {
+	struct drm_device *dev = &sdev->dev;
 	struct platform_device *pdev = sdev->pdev;
 	struct resource *mem;
 	void __iomem *screen_base;
+	int ret;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem)
 		return -EINVAL;
 
+	ret = devm_aperture_acquire_from_firmware(dev, mem->start, resource_size(mem));
+	if (ret) {
+		drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
+			mem->start, mem->end, ret);
+		return ret;
+	}
+
 	screen_base = devm_ioremap_wc(&pdev->dev, mem->start,
 				      resource_size(mem));
 	if (!screen_base)
@@ -625,12 +635,18 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	struct drm_framebuffer *fb = plane_state->fb;
 	void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */
+	struct drm_device *dev = &sdev->dev;
+	int idx;
 
 	if (!fb)
 		return;
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	drm_fb_blit_dstclip(sdev->screen_base, sdev->pitch,
 			    sdev->format->format, vmap, fb);
+	drm_dev_exit(idx);
 }
 
 static void
@@ -658,7 +674,9 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping abstraction properly */
 	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_device *dev = &sdev->dev;
 	struct drm_rect clip;
+	int idx;
 
 	if (!fb)
 		return;
@@ -666,8 +684,13 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 	if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip))
 		return;
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	drm_fb_blit_rect_dstclip(sdev->screen_base, sdev->pitch,
 				 sdev->format->format, vmap, fb, &clip);
+
+	drm_dev_exit(idx);
 }
 
 static const struct drm_simple_display_pipe_funcs
@@ -847,7 +870,7 @@ static int simpledrm_remove(struct platform_device *pdev)
 	struct simpledrm_device *sdev = platform_get_drvdata(pdev);
 	struct drm_device *dev = &sdev->dev;
 
-	drm_dev_unregister(dev);
+	drm_dev_unplug(dev);
 
 	return 0;
 }
-- 
2.31.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2021-04-30 10:58 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30 10:58 [PATCH v5 0/9] drm: Support simple-framebuffer devices and firmware fbs Thomas Zimmermann
2021-04-30 10:58 ` Thomas Zimmermann
2021-04-30 10:58 ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 1/9] drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip() Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 2/9] drm/format-helper: Add blitter functions Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 3/9] drm/aperture: Add infrastructure for aperture ownership Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 4/9] drm: Add simpledrm driver Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 5/9] drm/simpledrm: Add fbdev emulation Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 6/9] drm/simpledrm: Initialize framebuffer data from device-tree node Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 7/9] drm/simpledrm: Acquire clocks from DT device node Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` [PATCH v5 8/9] drm/simpledrm: Acquire regulators " Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann
2021-04-30 10:58 ` Thomas Zimmermann [this message]
2021-04-30 10:58   ` [PATCH v5 9/9] drm/simpledrm: Acquire memory aperture for framebuffer Thomas Zimmermann
2021-04-30 10:58   ` Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210430105840.30515-10-tzimmermann@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@linux.ie \
    --cc=bluescreen_avenger@verizon.net \
    --cc=broonie@kernel.org \
    --cc=corbet@lwn.net \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.l.velikov@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=maxime@cerno.tech \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.