All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nikola Cornij <nikola.cornij@amd.com>
To: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	Nikola Cornij <nikola.cornij@amd.com>,
	koba.ko@canonical.com, aurabindo.pillai@amd.com,
	mikita.lipski@amd.com, bskeggs@redhat.com
Subject: [PATCH v1 1/1] drm/dp_mst: Use the correct max source link rate for i915
Date: Fri, 30 Apr 2021 17:22:24 -0400	[thread overview]
Message-ID: <20210430212224.21588-2-nikola.cornij@amd.com> (raw)
In-Reply-To: <20210430212224.21588-1-nikola.cornij@amd.com>

[why]
Previously used value was not safe to provide the correct value, i.e. it
could be 0 if not not configured, leading to no MST on this platform.

[how]
Do not use the value from BIOS, but from the structure populated at
encoder initialization time.

Fixes: 98025a62cb00 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index bf7f8487945c..01a0ed99988f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -942,7 +942,6 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 	struct intel_dp *intel_dp = &dig_port->dp;
 	enum port port = dig_port->base.port;
 	int ret;
-	int bios_max_link_rate;
 
 	if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp))
 		return 0;
@@ -957,11 +956,11 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 
 	/* create encoders */
 	intel_dp_create_fake_mst_encoders(dig_port);
-	bios_max_link_rate = intel_bios_dp_max_link_rate(&dig_port->base);
 	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm,
 					   &intel_dp->aux, 16, 3,
 					   (u8)dig_port->max_lanes,
-					   (u8)(bios_max_link_rate / 27000), conn_base_id);
+					   (u8)(intel_dp->source_rates[intel_dp->num_source_rates - 1] / 27000),
+					   conn_base_id);
 	if (ret)
 		return ret;
 
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Nikola Cornij <nikola.cornij@amd.com>
To: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	Nikola Cornij <nikola.cornij@amd.com>,
	koba.ko@canonical.com, aurabindo.pillai@amd.com,
	mikita.lipski@amd.com, bskeggs@redhat.com
Subject: [Intel-gfx] [PATCH v1 1/1] drm/dp_mst: Use the correct max source link rate for i915
Date: Fri, 30 Apr 2021 17:22:24 -0400	[thread overview]
Message-ID: <20210430212224.21588-2-nikola.cornij@amd.com> (raw)
In-Reply-To: <20210430212224.21588-1-nikola.cornij@amd.com>

[why]
Previously used value was not safe to provide the correct value, i.e. it
could be 0 if not not configured, leading to no MST on this platform.

[how]
Do not use the value from BIOS, but from the structure populated at
encoder initialization time.

Fixes: 98025a62cb00 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index bf7f8487945c..01a0ed99988f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -942,7 +942,6 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 	struct intel_dp *intel_dp = &dig_port->dp;
 	enum port port = dig_port->base.port;
 	int ret;
-	int bios_max_link_rate;
 
 	if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp))
 		return 0;
@@ -957,11 +956,11 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 
 	/* create encoders */
 	intel_dp_create_fake_mst_encoders(dig_port);
-	bios_max_link_rate = intel_bios_dp_max_link_rate(&dig_port->base);
 	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm,
 					   &intel_dp->aux, 16, 3,
 					   (u8)dig_port->max_lanes,
-					   (u8)(bios_max_link_rate / 27000), conn_base_id);
+					   (u8)(intel_dp->source_rates[intel_dp->num_source_rates - 1] / 27000),
+					   conn_base_id);
 	if (ret)
 		return ret;
 
-- 
2.25.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

WARNING: multiple messages have this Message-ID (diff)
From: Nikola Cornij <nikola.cornij@amd.com>
To: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	Nikola Cornij <nikola.cornij@amd.com>,
	koba.ko@canonical.com, aurabindo.pillai@amd.com,
	jani.nikula@linux.intel.com, mikita.lipski@amd.com,
	ville.syrjala@linux.intel.com, bskeggs@redhat.com
Subject: [PATCH v1 1/1] drm/dp_mst: Use the correct max source link rate for i915
Date: Fri, 30 Apr 2021 17:22:24 -0400	[thread overview]
Message-ID: <20210430212224.21588-2-nikola.cornij@amd.com> (raw)
In-Reply-To: <20210430212224.21588-1-nikola.cornij@amd.com>

[why]
Previously used value was not safe to provide the correct value, i.e. it
could be 0 if not not configured, leading to no MST on this platform.

[how]
Do not use the value from BIOS, but from the structure populated at
encoder initialization time.

Fixes: 98025a62cb00 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index bf7f8487945c..01a0ed99988f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -942,7 +942,6 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 	struct intel_dp *intel_dp = &dig_port->dp;
 	enum port port = dig_port->base.port;
 	int ret;
-	int bios_max_link_rate;
 
 	if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp))
 		return 0;
@@ -957,11 +956,11 @@ intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id)
 
 	/* create encoders */
 	intel_dp_create_fake_mst_encoders(dig_port);
-	bios_max_link_rate = intel_bios_dp_max_link_rate(&dig_port->base);
 	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm,
 					   &intel_dp->aux, 16, 3,
 					   (u8)dig_port->max_lanes,
-					   (u8)(bios_max_link_rate / 27000), conn_base_id);
+					   (u8)(intel_dp->source_rates[intel_dp->num_source_rates - 1] / 27000),
+					   conn_base_id);
 	if (ret)
 		return ret;
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  reply	other threads:[~2021-04-30 21:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30 21:22 [PATCH v1 0/1] drm/dp_mst: Use the correct max source link rate for i915 Nikola Cornij
2021-04-30 21:22 ` Nikola Cornij
2021-04-30 21:22 ` [Intel-gfx] " Nikola Cornij
2021-04-30 21:22 ` Nikola Cornij [this message]
2021-04-30 21:22   ` [PATCH v1 1/1] " Nikola Cornij
2021-04-30 21:22   ` [Intel-gfx] " Nikola Cornij
2021-04-30 21:36   ` Lyude Paul
2021-04-30 21:36     ` Lyude Paul
2021-04-30 21:36     ` [Intel-gfx] " Lyude Paul
2021-05-03 12:45 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210430212224.21588-2-nikola.cornij@amd.com \
    --to=nikola.cornij@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=aurabindo.pillai@amd.com \
    --cc=bskeggs@redhat.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=koba.ko@canonical.com \
    --cc=mikita.lipski@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.