[PATCH 3/4] dt-bindings: Add Rockchip rk817 audio CODEC support

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

Create dt-binding documentation to document rk817 codec.
New property name of rockchip,mic-in-differential added to control if
the microphone is in differential mode or not.

Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
Changes in v9:
 - Add cover letter.
 - Remove documentation for interrupt parent per Rob Herring's request.
 - Remove unused MODULE_DEVICE_TABLE to fix a bug identified by kernel test
   robot.
Changes in v8:
 - Added additional documentation for missing properties of #sound-dai-cells,
   interrupt-parent, and wakeup-source for mfd documentation.
 - Corrected order of elements descriptions in device tree documentation.
 - Changed name of "mic-in-differential" to "rockchip,mic-in-differential".
 - Changed name of sound card from "rockchip,rk817-codec" to "Analog".
 - Removed unused resets and reset-names from the i2s1_2ch node.
Changes in v7:
 - Removed ifdef around register definitions for MFD.
 - Replaced codec documentation with updates to MFD documentation.
 - Reordered elements in example to comply with upstream rules.
 - Added binding update back for Odroid Go Advance as requested.
 - Submitting patches from gmail now.
Changes in v6:
 - Included additional project maintainers for correct subsystems.
 - Removed unneeded compatible from DT documentation.
 - Removed binding update for Odroid Go Advance (will do in seperate series).
Changes in v5:
 - Move register definitions from rk817_codec.h to main rk808.h register
   definitions.
 - Add volatile register for codec bits.
 - Add default values for codec bits.
 - Removed of_compatible from mtd driver (not necessary).
 - Switched to using parent regmap instead of private regmap for codec.
Changes in v4:
 - Created set_pll() call.
 - Created user visible gain control in mic.
 - Check for return value of clk_prepare_enable().
 - Removed duplicate clk_prepare_enable().
 - Split DT documentation to separate commit.
Changes in v3:
 - Use DAPM macros to set audio path.
 - Updated devicetree binding (as every rk817 has this codec chip).
 - Changed documentation to yaml format.
 - Split MFD changes to separate commit.
Changes in v2:
 - Fixed audio path registers to solve some bugs.

 .../devicetree/bindings/mfd/rk808.txt         | 186 ++++++++++++++++++
 1 file changed, 186 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 04df07f6f793..56121039154f 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -23,6 +23,7 @@ Optional properties:
   default output clock name
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
+- wakeup-source: Device can be used as a wakeup source.
 
 Optional RK805 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
@@ -63,8 +64,16 @@ Optional RK809 properties:
 - vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
 
 Optional RK817 properties:
+- clocks:	The input clock for the audio codec
+- clock-names:	The clock name for the codec clock. Should be "mclk".
+- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0.
+
 - vcc8-supply:  The input supply for BOOST
 - vcc9-supply:  The input supply for OTG_SWITCH
+- codec:	The child node for the codec to hold additional properties.
+
+- rockchip,mic-in-differential: Telling if the microphone uses differential
+				mode. Should be under the codec child node.
 
 Optional RK818 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
@@ -275,3 +284,180 @@ Example:
 			};
 		};
 	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
-- 
2.25.1