All of lore.kernel.org
 help / color / mirror / Atom feed
From: Werner Sembach <wse@tuxedocomputers.com>
To: wse@tuxedocomputers.com, ville.syrjala@linux.intel.com,
	airlied@linux.ie, daniel@ffwll.ch,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] Use YCbCr420 as fallback when RGB fails
Date: Wed,  5 May 2021 19:24:01 +0200	[thread overview]
Message-ID: <20210505172401.1453178-4-wse@tuxedocomputers.com> (raw)
In-Reply-To: <20210505172401.1453178-1-wse@tuxedocomputers.com>

When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.

AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.

On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
Now with the suggestes change as it does makes a difference ^^

From ce3092930bca37468c6122a7704202f9e3b39e81 Mon Sep 17 00:00:00 2001
From: Werner Sembach <wse@tuxedocomputers.com>
Date: Mon, 3 May 2021 16:23:17 +0200
Subject: [PATCH 3/3] Use YCbCr420 as fallback when RGB fails

---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index b0201d4f27eb..7815569267e3 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1897,6 +1897,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	int clock = mode->clock;
 	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 	bool has_hdmi_sink = intel_has_hdmi_sink(hdmi, connector->state);
+	bool ycbcr_420_only;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
@@ -1913,12 +1914,20 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 		clock *= 2;
 	}
 
-	if (drm_mode_is_420_only(&connector->display_info, mode))
+	ycbcr_420_only = drm_mode_is_420_only(&connector->display_info, mode);
+	if (ycbcr_420_only)
 		clock /= 2;
 
 	status = intel_hdmi_mode_clock_valid(hdmi, clock, has_hdmi_sink);
-	if (status != MODE_OK)
-		return status;
+	if (status != MODE_OK) {
+		if (ycbcr_420_only || !connector->ycbcr_420_allowed || !drm_mode_is_420_also(&connector->display_info, mode))
+			return status;
+
+		clock /= 2;
+		status = intel_hdmi_mode_clock_valid(hdmi, clock, has_hdmi_sink);
+		if (status != MODE_OK)
+			return status;
+	}
 
 	return intel_mode_valid_max_plane_size(dev_priv, mode, false);
 }
@@ -2125,6 +2134,14 @@ static int intel_hdmi_compute_output_format(struct intel_encoder *encoder,
 	}
 
 	ret = intel_hdmi_compute_clock(encoder, crtc_state);
+	if (ret) {
+		if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_YCBCR420 &&
+				connector->ycbcr_420_allowed &&
+				drm_mode_is_420_also(&connector->display_info, adjusted_mode)) {
+			crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+			ret = intel_hdmi_compute_clock(encoder, crtc_state);
+		}
+	}
 
 	return ret;
 }
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Werner Sembach <wse@tuxedocomputers.com>
To: wse@tuxedocomputers.com, ville.syrjala@linux.intel.com,
	airlied@linux.ie, daniel@ffwll.ch,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] Use YCbCr420 as fallback when RGB fails
Date: Wed,  5 May 2021 19:24:01 +0200	[thread overview]
Message-ID: <20210505172401.1453178-4-wse@tuxedocomputers.com> (raw)
In-Reply-To: <20210505172401.1453178-1-wse@tuxedocomputers.com>

When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.

AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.

On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
Now with the suggestes change as it does makes a difference ^^

From ce3092930bca37468c6122a7704202f9e3b39e81 Mon Sep 17 00:00:00 2001
From: Werner Sembach <wse@tuxedocomputers.com>
Date: Mon, 3 May 2021 16:23:17 +0200
Subject: [PATCH 3/3] Use YCbCr420 as fallback when RGB fails

---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index b0201d4f27eb..7815569267e3 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1897,6 +1897,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	int clock = mode->clock;
 	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 	bool has_hdmi_sink = intel_has_hdmi_sink(hdmi, connector->state);
+	bool ycbcr_420_only;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
@@ -1913,12 +1914,20 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 		clock *= 2;
 	}
 
-	if (drm_mode_is_420_only(&connector->display_info, mode))
+	ycbcr_420_only = drm_mode_is_420_only(&connector->display_info, mode);
+	if (ycbcr_420_only)
 		clock /= 2;
 
 	status = intel_hdmi_mode_clock_valid(hdmi, clock, has_hdmi_sink);
-	if (status != MODE_OK)
-		return status;
+	if (status != MODE_OK) {
+		if (ycbcr_420_only || !connector->ycbcr_420_allowed || !drm_mode_is_420_also(&connector->display_info, mode))
+			return status;
+
+		clock /= 2;
+		status = intel_hdmi_mode_clock_valid(hdmi, clock, has_hdmi_sink);
+		if (status != MODE_OK)
+			return status;
+	}
 
 	return intel_mode_valid_max_plane_size(dev_priv, mode, false);
 }
@@ -2125,6 +2134,14 @@ static int intel_hdmi_compute_output_format(struct intel_encoder *encoder,
 	}
 
 	ret = intel_hdmi_compute_clock(encoder, crtc_state);
+	if (ret) {
+		if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_YCBCR420 &&
+				connector->ycbcr_420_allowed &&
+				drm_mode_is_420_also(&connector->display_info, adjusted_mode)) {
+			crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+			ret = intel_hdmi_compute_clock(encoder, crtc_state);
+		}
+	}
 
 	return ret;
 }
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Werner Sembach <wse@tuxedocomputers.com>
To: wse@tuxedocomputers.com, ville.syrjala@linux.intel.com,
	airlied@linux.ie, daniel@ffwll.ch,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [Intel-gfx] [PATCH 3/3] Use YCbCr420 as fallback when RGB fails
Date: Wed,  5 May 2021 19:24:01 +0200	[thread overview]
Message-ID: <20210505172401.1453178-4-wse@tuxedocomputers.com> (raw)
In-Reply-To: <20210505172401.1453178-1-wse@tuxedocomputers.com>

When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.

AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.

On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
Now with the suggestes change as it does makes a difference ^^

From ce3092930bca37468c6122a7704202f9e3b39e81 Mon Sep 17 00:00:00 2001
From: Werner Sembach <wse@tuxedocomputers.com>
Date: Mon, 3 May 2021 16:23:17 +0200
Subject: [PATCH 3/3] Use YCbCr420 as fallback when RGB fails

---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index b0201d4f27eb..7815569267e3 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1897,6 +1897,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	int clock = mode->clock;
 	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
 	bool has_hdmi_sink = intel_has_hdmi_sink(hdmi, connector->state);
+	bool ycbcr_420_only;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
@@ -1913,12 +1914,20 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 		clock *= 2;
 	}
 
-	if (drm_mode_is_420_only(&connector->display_info, mode))
+	ycbcr_420_only = drm_mode_is_420_only(&connector->display_info, mode);
+	if (ycbcr_420_only)
 		clock /= 2;
 
 	status = intel_hdmi_mode_clock_valid(hdmi, clock, has_hdmi_sink);
-	if (status != MODE_OK)
-		return status;
+	if (status != MODE_OK) {
+		if (ycbcr_420_only || !connector->ycbcr_420_allowed || !drm_mode_is_420_also(&connector->display_info, mode))
+			return status;
+
+		clock /= 2;
+		status = intel_hdmi_mode_clock_valid(hdmi, clock, has_hdmi_sink);
+		if (status != MODE_OK)
+			return status;
+	}
 
 	return intel_mode_valid_max_plane_size(dev_priv, mode, false);
 }
@@ -2125,6 +2134,14 @@ static int intel_hdmi_compute_output_format(struct intel_encoder *encoder,
 	}
 
 	ret = intel_hdmi_compute_clock(encoder, crtc_state);
+	if (ret) {
+		if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_YCBCR420 &&
+				connector->ycbcr_420_allowed &&
+				drm_mode_is_420_also(&connector->display_info, adjusted_mode)) {
+			crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+			ret = intel_hdmi_compute_clock(encoder, crtc_state);
+		}
+	}
 
 	return ret;
 }
-- 
2.25.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-05-05 17:53 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-05 17:23 [PATCH 0/3] drm/i915/display Try YCbCr420 color when RGB fails Werner Sembach
2021-05-05 17:23 ` [Intel-gfx] " Werner Sembach
2021-05-05 17:23 ` Werner Sembach
2021-05-05 17:23 ` [PATCH 1/3] New function to avoid duplicate code in upcomming commits Werner Sembach
2021-05-05 17:23   ` [Intel-gfx] " Werner Sembach
2021-05-05 17:23   ` Werner Sembach
2021-05-06 10:19   ` [Intel-gfx] " Jani Nikula
2021-05-06 10:19     ` Jani Nikula
2021-05-06 16:41     ` Werner Sembach
2021-05-06 16:41       ` Werner Sembach
2021-05-06 16:41       ` Werner Sembach
2021-05-06 17:33       ` Jani Nikula
2021-05-06 17:33         ` Jani Nikula
2021-05-06 10:21   ` Jani Nikula
2021-05-06 10:21     ` Jani Nikula
2021-05-05 17:24 ` [PATCH 2/3] Restructure output format computation for better expandability Werner Sembach
2021-05-05 17:24   ` [Intel-gfx] " Werner Sembach
2021-05-05 17:24   ` Werner Sembach
2021-05-05 17:24 ` Werner Sembach [this message]
2021-05-05 17:24   ` [Intel-gfx] [PATCH 3/3] Use YCbCr420 as fallback when RGB fails Werner Sembach
2021-05-05 17:24   ` Werner Sembach
2021-05-05 17:25 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915/display Try YCbCr420 color " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2021-05-05 17:14 [PATCH 0/3] " Werner Sembach
2021-05-05 17:14 ` [PATCH 3/3] Use YCbCr420 as fallback " Werner Sembach
2021-05-05 17:14   ` Werner Sembach
2021-05-05 14:10 [PATCH 0/4] drm/i915/display Try YCbCr420 color " Werner Sembach
2021-05-05 14:10 ` [PATCH 3/3] Use YCbCr420 as fallback " Werner Sembach
2021-05-05 14:10   ` Werner Sembach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210505172401.1453178-4-wse@tuxedocomputers.com \
    --to=wse@tuxedocomputers.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.