All of lore.kernel.org
 help / color / mirror / Atom feed
From: Weilun Du <wdu@google.com>
To: Johannes Berg <johannes@sipsolutions.net>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Weilun Du <wdu@google.com>,
	kernel-team@android.com, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1] mac80211_hwsim: add concurrent channels scanning support over virtio
Date: Thu,  6 May 2021 11:05:29 -0700	[thread overview]
Message-ID: <20210506180530.3418576-1-wdu@google.com> (raw)

This fixed the crash when setting channels to 2 or more when
communicating over virtio.

Signed-off-by: Weilun Du <wdu@google.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 48 +++++++++++++++++++++------
 1 file changed, 38 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 51ce767eaf88..0c44ec0ab03f 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -626,6 +626,7 @@ struct mac80211_hwsim_data {
 	u32 ciphers[ARRAY_SIZE(hwsim_ciphers)];
 
 	struct mac_address addresses[2];
+	struct ieee80211_chanctx_conf *chanctx;
 	int channels, idx;
 	bool use_chanctx;
 	bool destroy_on_close;
@@ -1257,7 +1258,8 @@ static inline u16 trans_tx_rate_flags_ieee2hwsim(struct ieee80211_tx_rate *rate)
 
 static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 				       struct sk_buff *my_skb,
-				       int dst_portid)
+				       int dst_portid,
+				       struct ieee80211_channel *channel)
 {
 	struct sk_buff *skb;
 	struct mac80211_hwsim_data *data = hw->priv;
@@ -1312,7 +1314,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 	if (nla_put_u32(skb, HWSIM_ATTR_FLAGS, hwsim_flags))
 		goto nla_put_failure;
 
-	if (nla_put_u32(skb, HWSIM_ATTR_FREQ, data->channel->center_freq))
+	if (nla_put_u32(skb, HWSIM_ATTR_FREQ, channel->center_freq))
 		goto nla_put_failure;
 
 	/* We get the tx control (rate and retries) info*/
@@ -1659,7 +1661,7 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 	_portid = READ_ONCE(data->wmediumd);
 
 	if (_portid || hwsim_virtio_enabled)
-		return mac80211_hwsim_tx_frame_nl(hw, skb, _portid);
+		return mac80211_hwsim_tx_frame_nl(hw, skb, _portid, channel);
 
 	/* NO wmediumd detected, perfect medium simulation */
 	data->tx_pkts++;
@@ -1770,7 +1772,7 @@ static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 	mac80211_hwsim_monitor_rx(hw, skb, chan);
 
 	if (_pid || hwsim_virtio_enabled)
-		return mac80211_hwsim_tx_frame_nl(hw, skb, _pid);
+		return mac80211_hwsim_tx_frame_nl(hw, skb, _pid, chan);
 
 	mac80211_hwsim_tx_frame_no_nl(hw, skb, chan);
 	dev_kfree_skb(skb);
@@ -2509,6 +2511,11 @@ static int mac80211_hwsim_croc(struct ieee80211_hw *hw,
 static int mac80211_hwsim_add_chanctx(struct ieee80211_hw *hw,
 				      struct ieee80211_chanctx_conf *ctx)
 {
+	struct mac80211_hwsim_data *hwsim = hw->priv;
+
+	mutex_lock(&hwsim->mutex);
+	hwsim->chanctx = ctx;
+	mutex_unlock(&hwsim->mutex);
 	hwsim_set_chanctx_magic(ctx);
 	wiphy_dbg(hw->wiphy,
 		  "add channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
@@ -2520,6 +2527,11 @@ static int mac80211_hwsim_add_chanctx(struct ieee80211_hw *hw,
 static void mac80211_hwsim_remove_chanctx(struct ieee80211_hw *hw,
 					  struct ieee80211_chanctx_conf *ctx)
 {
+	struct mac80211_hwsim_data *hwsim = hw->priv;
+
+	mutex_lock(&hwsim->mutex);
+	hwsim->chanctx = NULL;
+	mutex_unlock(&hwsim->mutex);
 	wiphy_dbg(hw->wiphy,
 		  "remove channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
 		  ctx->def.chan->center_freq, ctx->def.width,
@@ -2532,6 +2544,11 @@ static void mac80211_hwsim_change_chanctx(struct ieee80211_hw *hw,
 					  struct ieee80211_chanctx_conf *ctx,
 					  u32 changed)
 {
+	struct mac80211_hwsim_data *hwsim = hw->priv;
+
+	mutex_lock(&hwsim->mutex);
+	hwsim->chanctx = ctx;
+	mutex_unlock(&hwsim->mutex);
 	hwsim_check_chanctx_magic(ctx);
 	wiphy_dbg(hw->wiphy,
 		  "change channel context control: %d MHz/width: %d/cfreqs:%d/%d MHz\n",
@@ -3124,6 +3141,7 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 		hw->wiphy->max_remain_on_channel_duration = 1000;
 		data->if_combination.radar_detect_widths = 0;
 		data->if_combination.num_different_channels = data->channels;
+		data->chanctx = NULL;
 	} else {
 		data->if_combination.num_different_channels = 1;
 		data->if_combination.radar_detect_widths =
@@ -3633,6 +3651,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	int frame_data_len;
 	void *frame_data;
 	struct sk_buff *skb = NULL;
+	struct ieee80211_channel *channel = NULL;
 
 	if (!info->attrs[HWSIM_ATTR_ADDR_RECEIVER] ||
 	    !info->attrs[HWSIM_ATTR_FRAME] ||
@@ -3659,6 +3678,17 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 	if (!data2)
 		goto out;
 
+	if (data2->use_chanctx) {
+		if (data2->tmp_chan)
+			channel = data2->tmp_chan;
+		else if (data2->chanctx)
+			channel = data2->chanctx->def.chan;
+	} else {
+		channel = data2->channel;
+	}
+	if (!channel)
+		goto out;
+
 	if (!hwsim_virtio_enabled) {
 		if (hwsim_net_get_netgroup(genl_info_net(info)) !=
 		    data2->netgroup)
@@ -3670,7 +3700,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 
 	/* check if radio is configured properly */
 
-	if (data2->idle || !data2->started)
+	if ((data2->idle && !data2->tmp_chan) || !data2->started)
 		goto out;
 
 	/* A frame is received from user space */
@@ -3683,18 +3713,16 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
 		mutex_lock(&data2->mutex);
 		rx_status.freq = nla_get_u32(info->attrs[HWSIM_ATTR_FREQ]);
 
-		if (rx_status.freq != data2->channel->center_freq &&
-		    (!data2->tmp_chan ||
-		     rx_status.freq != data2->tmp_chan->center_freq)) {
+		if (rx_status.freq != channel->center_freq) {
 			mutex_unlock(&data2->mutex);
 			goto out;
 		}
 		mutex_unlock(&data2->mutex);
 	} else {
-		rx_status.freq = data2->channel->center_freq;
+		rx_status.freq = channel->center_freq;
 	}
 
-	rx_status.band = data2->channel->band;
+	rx_status.band = channel->band;
 	rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]);
 	rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
 
-- 
2.31.1.607.g51e8a6a459-goog


             reply	other threads:[~2021-05-06 18:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 18:05 Weilun Du [this message]
2021-05-06 18:19 ` [PATCH v1] mac80211_hwsim: add concurrent channels scanning support over virtio Johannes Berg
2021-05-06 21:11   ` Weilun Du
2021-05-06 21:13     ` Johannes Berg
2021-05-06 22:57       ` Weilun Du

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210506180530.3418576-1-wdu@google.com \
    --to=wdu@google.com \
    --cc=davem@davemloft.net \
    --cc=johannes@sipsolutions.net \
    --cc=kernel-team@android.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.