From: Maxime Ripard <maxime@cerno.tech> To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Thomas Zimmermann <tzimmermann@suse.de>, Maxime Ripard <maxime@cerno.tech>, dri-devel@lists.freedesktop.org, Daniel Vetter <daniel.vetter@intel.com>, David Airlie <airlied@linux.ie> Cc: Eric Anholt <eric@anholt.net>, Nicolas Saenz Julienne <nsaenz@kernel.org>, bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, Dave Stevenson <dave.stevenson@raspberrypi.com>, Phil Elwell <phil@raspberrypi.com>, Tim Gover <tim.gover@raspberrypi.com>, Dom Cobley <dom@raspberrypi.com>, linux-kernel@vger.kernel.org Subject: [PATCH v4 00/12] drm/vc4: hdmi: Support the 4k @ 60Hz modes Date: Fri, 7 May 2021 17:05:03 +0200 [thread overview] Message-ID: <20210507150515.257424-1-maxime@cerno.tech> (raw) Hi, Here is a series that enables the higher resolutions on the HDMI0 Controller found in the BCM2711 (RPi4). In order to work it needs a few adjustments to config.txt, most notably to enable the enable_hdmi_4kp60 option. Let me know what you think, Maxime --- Changes from v3: - Rework the encoder retrieval code that was broken on the RPi3 and older - Fix a scrambling enabling issue on some display Changes from v2: - Gathered the various tags - Added Cc stable when relevant - Split out the check to test whether the scrambler is required into an helper - Fixed a bug where the scrambler state wouldn't be tracked properly if it was enabled at boot Changes from v1: - Dropped the range accessors - Drop the mention of force_turbo - Reordered the SCRAMBLER_CTL register to match the offset - Removed duplicate HDMI_14_MAX_TMDS_CLK define - Warn about enable_hdmi_4kp60 only if there's some modes that can't be reached - Rework the BVB clock computation Maxime Ripard (12): drm/vc4: txp: Properly set the possible_crtcs mask drm/vc4: crtc: Skip the TXP drm/vc4: crtc: Pass the drm_atomic_state to config_pv drm/vc4: crtc: Fix vc4_get_crtc_encoder logic drm/vc4: crtc: Lookup the encoder from the register at boot drm/vc4: hdmi: Prevent clock unbalance drm/vc4: hvs: Make the HVS bind first drm/vc4: hdmi: Properly compute the BVB clock rate drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies drm/vc4: hdmi: Enable the scrambler drm/vc4: hdmi: Add a workqueue to set scrambling drm/vc4: hdmi: Raise the maximum clock rate drivers/gpu/drm/vc4/vc4_crtc.c | 66 ++++++++++--- drivers/gpu/drm/vc4/vc4_drv.c | 11 ++- drivers/gpu/drm/vc4/vc4_hdmi.c | 147 ++++++++++++++++++++++++++-- drivers/gpu/drm/vc4/vc4_hdmi.h | 10 ++ drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 3 + drivers/gpu/drm/vc4/vc4_txp.c | 2 +- 6 files changed, 217 insertions(+), 22 deletions(-) -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech> To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Thomas Zimmermann <tzimmermann@suse.de>, Maxime Ripard <maxime@cerno.tech>, dri-devel@lists.freedesktop.org, Daniel Vetter <daniel.vetter@intel.com>, David Airlie <airlied@linux.ie> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>, Dom Cobley <dom@raspberrypi.com>, Tim Gover <tim.gover@raspberrypi.com>, Dave Stevenson <dave.stevenson@raspberrypi.com>, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, Phil Elwell <phil@raspberrypi.com> Subject: [PATCH v4 00/12] drm/vc4: hdmi: Support the 4k @ 60Hz modes Date: Fri, 7 May 2021 17:05:03 +0200 [thread overview] Message-ID: <20210507150515.257424-1-maxime@cerno.tech> (raw) Hi, Here is a series that enables the higher resolutions on the HDMI0 Controller found in the BCM2711 (RPi4). In order to work it needs a few adjustments to config.txt, most notably to enable the enable_hdmi_4kp60 option. Let me know what you think, Maxime --- Changes from v3: - Rework the encoder retrieval code that was broken on the RPi3 and older - Fix a scrambling enabling issue on some display Changes from v2: - Gathered the various tags - Added Cc stable when relevant - Split out the check to test whether the scrambler is required into an helper - Fixed a bug where the scrambler state wouldn't be tracked properly if it was enabled at boot Changes from v1: - Dropped the range accessors - Drop the mention of force_turbo - Reordered the SCRAMBLER_CTL register to match the offset - Removed duplicate HDMI_14_MAX_TMDS_CLK define - Warn about enable_hdmi_4kp60 only if there's some modes that can't be reached - Rework the BVB clock computation Maxime Ripard (12): drm/vc4: txp: Properly set the possible_crtcs mask drm/vc4: crtc: Skip the TXP drm/vc4: crtc: Pass the drm_atomic_state to config_pv drm/vc4: crtc: Fix vc4_get_crtc_encoder logic drm/vc4: crtc: Lookup the encoder from the register at boot drm/vc4: hdmi: Prevent clock unbalance drm/vc4: hvs: Make the HVS bind first drm/vc4: hdmi: Properly compute the BVB clock rate drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies drm/vc4: hdmi: Enable the scrambler drm/vc4: hdmi: Add a workqueue to set scrambling drm/vc4: hdmi: Raise the maximum clock rate drivers/gpu/drm/vc4/vc4_crtc.c | 66 ++++++++++--- drivers/gpu/drm/vc4/vc4_drv.c | 11 ++- drivers/gpu/drm/vc4/vc4_hdmi.c | 147 ++++++++++++++++++++++++++-- drivers/gpu/drm/vc4/vc4_hdmi.h | 10 ++ drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 3 + drivers/gpu/drm/vc4/vc4_txp.c | 2 +- 6 files changed, 217 insertions(+), 22 deletions(-) -- 2.31.1
next reply other threads:[~2021-05-07 15:05 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-07 15:05 Maxime Ripard [this message] 2021-05-07 15:05 ` [PATCH v4 00/12] drm/vc4: hdmi: Support the 4k @ 60Hz modes Maxime Ripard 2021-05-07 15:05 ` [PATCH v4 01/12] drm/vc4: txp: Properly set the possible_crtcs mask Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-07 15:05 ` [PATCH v4 02/12] drm/vc4: crtc: Skip the TXP Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-07 15:05 ` [PATCH v4 03/12] drm/vc4: crtc: Pass the drm_atomic_state to config_pv Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-21 17:26 ` Dave Stevenson 2021-05-21 17:26 ` Dave Stevenson 2021-05-07 15:05 ` [PATCH v4 04/12] drm/vc4: crtc: Fix vc4_get_crtc_encoder logic Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-21 17:54 ` Dave Stevenson 2021-05-21 17:54 ` Dave Stevenson 2021-05-07 15:05 ` [PATCH v4 05/12] drm/vc4: crtc: Lookup the encoder from the register at boot Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-21 17:58 ` Dave Stevenson 2021-05-21 17:58 ` Dave Stevenson 2021-05-07 15:05 ` [PATCH v4 06/12] drm/vc4: hdmi: Prevent clock unbalance Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-21 18:05 ` Dave Stevenson 2021-05-21 18:05 ` Dave Stevenson 2021-05-07 15:05 ` [PATCH v4 07/12] drm/vc4: hvs: Make the HVS bind first Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-07 15:05 ` [PATCH v4 08/12] drm/vc4: hdmi: Properly compute the BVB clock rate Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-07 15:05 ` [PATCH v4 09/12] drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-07 15:05 ` [PATCH v4 10/12] drm/vc4: hdmi: Enable the scrambler Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-21 17:39 ` Dave Stevenson 2021-05-21 17:39 ` Dave Stevenson 2021-05-07 15:05 ` [PATCH v4 11/12] drm/vc4: hdmi: Add a workqueue to set scrambling Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-21 17:43 ` Dave Stevenson 2021-05-21 17:43 ` Dave Stevenson 2021-05-07 15:05 ` [PATCH v4 12/12] drm/vc4: hdmi: Raise the maximum clock rate Maxime Ripard 2021-05-07 15:05 ` Maxime Ripard 2021-05-24 12:45 ` [PATCH v4 00/12] drm/vc4: hdmi: Support the 4k @ 60Hz modes Maxime Ripard 2021-05-24 12:45 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210507150515.257424-1-maxime@cerno.tech \ --to=maxime@cerno.tech \ --cc=airlied@linux.ie \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=daniel.vetter@intel.com \ --cc=dave.stevenson@raspberrypi.com \ --cc=dom@raspberrypi.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=eric@anholt.net \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=maarten.lankhorst@linux.intel.com \ --cc=nsaenz@kernel.org \ --cc=phil@raspberrypi.com \ --cc=tim.gover@raspberrypi.com \ --cc=tzimmermann@suse.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.