All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v3 04/48] drm/i915/xelpd: Handle new location of outputs D and E
Date: Fri,  7 May 2021 19:27:36 -0700	[thread overview]
Message-ID: <20210508022820.780227-5-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210508022820.780227-1-matthew.d.roper@intel.com>

The DDI naming template for display version 12 went A-C, TC1-TC6.  With
XE_LPD, that naming scheme for DDI's has now changed to A-E, TC1-TC4.

The XE_LPD design keeps the register offsets and bitfields relating to
the TC outputs in the same location they were previously.  The new "D"
and "E" outputs now take the locations that were previously used by TC5
and TC6 outputs, or what we would have considered to be outputs "H" and
"I" under the legacy lettering scheme.

For the most part everything will just work as long as we initialize the
output with the proper 'enum port' value.  However we do need to take
care to pick the correct AUX channel when parsing the VBT (e.g., a
reference to 'AUX D' is actually asking us to use the 8th aux channel,
not the fourth).  We should also make sure that our encoders and aux
channels are named appropriately so that it's easier to correlate driver
debug messages with the bspec instructions.

v2:
 - Update handling of TGL_TRANS_CLK_SEL_PORT.  (Jose)

v3:
 - Add hpd_pin to handle outputs D and E (Jose)
 - Fixed conversion of BIOS port to aux ch for TC ports (Jose)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bios.c    | 28 +++++++++++---
 drivers/gpu/drm/i915/display/intel_ddi.c     | 40 +++++++++++++++-----
 drivers/gpu/drm/i915/display/intel_display.c |  6 ++-
 drivers/gpu/drm/i915/display/intel_display.h |  8 ++++
 drivers/gpu/drm/i915/display/intel_dp_aux.c  | 14 ++++---
 5 files changed, 74 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index befab891a6b9..027cc738a168 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -2853,7 +2853,9 @@ enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *i915,
 			aux_ch = AUX_CH_C;
 		break;
 	case DP_AUX_D:
-		if (IS_ALDERLAKE_S(i915))
+		if (DISPLAY_VER(i915) == 13)
+			aux_ch = AUX_CH_D_XELPD;
+		else if (IS_ALDERLAKE_S(i915))
 			aux_ch = AUX_CH_USBC3;
 		else if (IS_DG1(i915) || IS_ROCKETLAKE(i915))
 			aux_ch = AUX_CH_USBC2;
@@ -2861,22 +2863,36 @@ enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *i915,
 			aux_ch = AUX_CH_D;
 		break;
 	case DP_AUX_E:
-		if (IS_ALDERLAKE_S(i915))
+		if (DISPLAY_VER(i915) == 13)
+			aux_ch = AUX_CH_E_XELPD;
+		else if (IS_ALDERLAKE_S(i915))
 			aux_ch = AUX_CH_USBC4;
 		else
 			aux_ch = AUX_CH_E;
 		break;
 	case DP_AUX_F:
-		aux_ch = AUX_CH_F;
+		if (DISPLAY_VER(i915) == 13)
+			aux_ch = AUX_CH_USBC1;
+		else
+			aux_ch = AUX_CH_F;
 		break;
 	case DP_AUX_G:
-		aux_ch = AUX_CH_G;
+		if (DISPLAY_VER(i915) == 13)
+			aux_ch = AUX_CH_USBC2;
+		else
+			aux_ch = AUX_CH_G;
 		break;
 	case DP_AUX_H:
-		aux_ch = AUX_CH_H;
+		if (DISPLAY_VER(i915) == 13)
+			aux_ch = AUX_CH_USBC3;
+		else
+			aux_ch = AUX_CH_H;
 		break;
 	case DP_AUX_I:
-		aux_ch = AUX_CH_I;
+		if (DISPLAY_VER(i915) == 13)
+			aux_ch = AUX_CH_USBC4;
+		else
+			aux_ch = AUX_CH_I;
 		break;
 	default:
 		MISSING_CASE(info->alternate_aux_channel);
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 0b382e40d594..d37b01b889c0 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -854,18 +854,19 @@ void intel_ddi_enable_pipe_clock(struct intel_encoder *encoder,
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	enum port port = encoder->port;
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	u32 val;
 
 	if (cpu_transcoder != TRANSCODER_EDP) {
-		if (DISPLAY_VER(dev_priv) >= 12)
-			intel_de_write(dev_priv,
-				       TRANS_CLK_SEL(cpu_transcoder),
-				       TGL_TRANS_CLK_SEL_PORT(port));
+		if (DISPLAY_VER(dev_priv) >= 13)
+			val = TGL_TRANS_CLK_SEL_PORT(phy);
+		else if (DISPLAY_VER(dev_priv) >= 12)
+			val = TGL_TRANS_CLK_SEL_PORT(encoder->port);
 		else
-			intel_de_write(dev_priv,
-				       TRANS_CLK_SEL(cpu_transcoder),
-				       TRANS_CLK_SEL_PORT(port));
+			val = TRANS_CLK_SEL_PORT(encoder->port);
+
+		intel_de_write(dev_priv, TRANS_CLK_SEL(cpu_transcoder), val);
 	}
 }
 
@@ -4354,6 +4355,17 @@ static bool hti_uses_phy(struct drm_i915_private *i915, enum phy phy)
 	       i915->hti_state & HDPORT_DDI_USED(phy);
 }
 
+static enum hpd_pin xelpd_hpd_pin(struct drm_i915_private *dev_priv,
+				  enum port port)
+{
+	if (port >= PORT_D_XELPD)
+		return HPD_PORT_D + port - PORT_D_XELPD;
+	else if (port >= PORT_TC1)
+		return HPD_PORT_TC1 + port - PORT_TC1;
+	else
+		return HPD_PORT_A + port - PORT_A;
+}
+
 static enum hpd_pin dg1_hpd_pin(struct drm_i915_private *dev_priv,
 				enum port port)
 {
@@ -4493,7 +4505,13 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	encoder = &dig_port->base;
 	encoder->devdata = devdata;
 
-	if (DISPLAY_VER(dev_priv) >= 12) {
+	if (DISPLAY_VER(dev_priv) >= 13 && port >= PORT_D_XELPD) {
+		drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs,
+				 DRM_MODE_ENCODER_TMDS,
+				 "DDI %c/PHY %c",
+				 port_name(port - PORT_D_XELPD + PORT_D),
+				 phy_name(phy));
+	} else if (DISPLAY_VER(dev_priv) >= 12) {
 		enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
 
 		drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs,
@@ -4604,7 +4622,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 		encoder->get_config = hsw_ddi_get_config;
 	}
 
-	if (IS_DG1(dev_priv))
+	if (DISPLAY_VER(dev_priv) >= 13)
+		encoder->hpd_pin = xelpd_hpd_pin(dev_priv, port);
+	else if (IS_DG1(dev_priv))
 		encoder->hpd_pin = dg1_hpd_pin(dev_priv, port);
 	else if (IS_ROCKETLAKE(dev_priv))
 		encoder->hpd_pin = rkl_hpd_pin(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e117fb312216..4aad98913d62 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3681,7 +3681,11 @@ bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
 
 enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
 {
-	if (IS_ALDERLAKE_S(i915) && port >= PORT_TC1)
+	if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD)
+		return PHY_D + port - PORT_D_XELPD;
+	else if (DISPLAY_VER(i915) >= 13 && port >= PORT_TC1)
+		return PHY_F + port - PORT_TC1;
+	else if (IS_ALDERLAKE_S(i915) && port >= PORT_TC1)
 		return PHY_B + port - PORT_TC1;
 	else if ((IS_DG1(i915) || IS_ROCKETLAKE(i915)) && port >= PORT_TC1)
 		return PHY_C + port - PORT_TC1;
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index e7764e746c6a..bd69affc791c 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -217,6 +217,10 @@ enum port {
 	PORT_TC5,
 	PORT_TC6,
 
+	/* XE_LPD repositions D/E offsets and bitfields */
+	PORT_D_XELPD = PORT_TC5,
+	PORT_E_XELPD,
+
 	I915_MAX_PORTS
 };
 
@@ -300,6 +304,10 @@ enum aux_ch {
 	AUX_CH_USBC4,
 	AUX_CH_USBC5,
 	AUX_CH_USBC6,
+
+	/* XE_LPD repositions D/E offsets and bitfields */
+	AUX_CH_D_XELPD = AUX_CH_USBC5,
+	AUX_CH_E_XELPD,
 };
 
 #define aux_ch_name(a) ((a) + 'A')
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c
index 350b12f0beb8..7c048d2ecf43 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
@@ -602,8 +602,8 @@ static i915_reg_t tgl_aux_ctl_reg(struct intel_dp *intel_dp)
 	case AUX_CH_USBC2:
 	case AUX_CH_USBC3:
 	case AUX_CH_USBC4:
-	case AUX_CH_USBC5:
-	case AUX_CH_USBC6:
+	case AUX_CH_USBC5:  /* aka AUX_CH_D_XELPD */
+	case AUX_CH_USBC6:  /* aka AUX_CH_E_XELPD */
 		return DP_AUX_CH_CTL(aux_ch);
 	default:
 		MISSING_CASE(aux_ch);
@@ -625,8 +625,8 @@ static i915_reg_t tgl_aux_data_reg(struct intel_dp *intel_dp, int index)
 	case AUX_CH_USBC2:
 	case AUX_CH_USBC3:
 	case AUX_CH_USBC4:
-	case AUX_CH_USBC5:
-	case AUX_CH_USBC6:
+	case AUX_CH_USBC5:  /* aka AUX_CH_D_XELPD */
+	case AUX_CH_USBC6:  /* aka AUX_CH_E_XELPD */
 		return DP_AUX_CH_DATA(aux_ch, index);
 	default:
 		MISSING_CASE(aux_ch);
@@ -681,7 +681,11 @@ void intel_dp_aux_init(struct intel_dp *intel_dp)
 	drm_dp_aux_init(&intel_dp->aux);
 
 	/* Failure to allocate our preferred name is not critical */
-	if (DISPLAY_VER(dev_priv) >= 12 && aux_ch >= AUX_CH_USBC1)
+	if (DISPLAY_VER(dev_priv) >= 13 && aux_ch >= AUX_CH_D_XELPD)
+		intel_dp->aux.name = kasprintf(GFP_KERNEL, "AUX %c/%s",
+					       aux_ch_name(aux_ch - AUX_CH_D_XELPD + AUX_CH_D),
+					       encoder->base.name);
+	else if (DISPLAY_VER(dev_priv) >= 12 && aux_ch >= AUX_CH_USBC1)
 		intel_dp->aux.name = kasprintf(GFP_KERNEL, "AUX USBC%c/%s",
 					       aux_ch - AUX_CH_USBC1 + '1',
 					       encoder->base.name);
-- 
2.25.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-05-08  2:29 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-08  2:27 [Intel-gfx] [PATCH v3 00/48] Alder Lake-P Support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 01/48] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-05-12 21:37   ` Lucas De Marchi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 02/48] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 03/48] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-05-08  2:27 ` Matt Roper [this message]
2021-05-14 13:52   ` [Intel-gfx] [PATCH v3 04/48] drm/i915/xelpd: Handle new location of outputs D and E Imre Deak
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 05/48] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 06/48] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-05-12 17:56   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 07/48] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 08/48] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 09/48] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-05-12 18:11   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-05-13 19:18   ` Navare, Manasi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 11/48] drm/i915: Get slice height before computing rc params Matt Roper
2021-05-13 19:20   ` Navare, Manasi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 12/48] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 13/48] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-05-08  2:52   ` [Intel-gfx] [PATCH v3.1 " Matt Roper
2021-05-12 22:28     ` Lucas De Marchi
2021-05-08  9:10   ` [Intel-gfx] [PATCH v3 " kernel test robot
2021-05-08  9:10     ` kernel test robot
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 14/48] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 15/48] drm/i915/xelpd: Provide port/phy mapping for vbt Matt Roper
2021-05-12 19:21   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 16/48] drm/i915/adl_p: Add PCH support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 17/48] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 18/48] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 19/48] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 20/48] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-05-14  9:06   ` Kahola, Mika
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 21/48] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 22/48] drm/i915/adl_p: Handle TC cold Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 23/48] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 24/48] drm/i915/adl_p: Enable modular fia Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 25/48] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 26/48] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 27/48] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 28/48] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-05-12 17:03   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 29/48] drm/i915/adl_p: MBUS programming Matt Roper
2021-05-14 10:09   ` Lisovskiy, Stanislav
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 30/48] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 31/48] drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 32/48] drm/i915/display: Remove a redundant function argument from intel_psr_enable_source() Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 33/48] drm/i915/display: Add PSR interrupt error check function Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 34/48] drm/i915/display: Introduce new intel_psr_pause/resume function Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 35/48] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-05-12 19:49   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 36/48] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-05-12 23:07   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 37/48] drm/i915/adl_p: Add PLL Support Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 38/48] drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 39/48] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-05-12 22:11   ` Srivatsa, Anusha
2021-05-13 19:09   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 40/48] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-05-13 19:12   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 41/48] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-05-13 19:17   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 42/48] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 43/48] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 44/48] drm/i915/adl_p: Add IPs stepping mapping Matt Roper
2021-05-12 22:35   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 45/48] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-05-14  9:35   ` Kahola, Mika
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 46/48] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-05-14 11:11   ` Kahola, Mika
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 47/48] drm/i915/adl_p: Disable CCS on a-step (Wa_22011186057) Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 48/48] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-05-08  2:48 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Alder Lake-P Support Patchwork
2021-05-08  3:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Alder Lake-P Support (rev2) Patchwork
2021-05-08  3:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-05-08  3:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-05-08  5:03 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210508022820.780227-5-matthew.d.roper@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.