All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH v3 05/48] drm/i915/xelpd: Add XE_LPD power wells
Date: Fri,  7 May 2021 19:27:37 -0700	[thread overview]
Message-ID: <20210508022820.780227-6-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210508022820.780227-1-matthew.d.roper@intel.com>

Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D.  These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):

               PG0
                |
             --PG1--
            /       \
          PGA     --PG2--
                 /   |   \
               PGB  PGC  PGD

PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.

PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).

v2:
 - Squash in LPSP status patch from Uma since it's also a
   powerwell-specific change.

Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
 .../drm/i915/display/intel_display_debugfs.c  |   6 +
 .../drm/i915/display/intel_display_power.c    | 424 +++++++++++++++++-
 .../drm/i915/display/intel_display_power.h    |   9 +
 drivers/gpu/drm/i915/display/intel_vdsc.c     |   4 +-
 drivers/gpu/drm/i915/i915_reg.h               |  10 +
 5 files changed, 450 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index d55ae83d037a..d77a0ab5cacf 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -1340,6 +1340,12 @@ static int i915_lpsp_status(struct seq_file *m, void *unused)
 {
 	struct drm_i915_private *i915 = node_to_i915(m->private);
 
+	if (DISPLAY_VER(i915) >= 13) {
+		LPSP_STATUS(!intel_lpsp_power_well_enabled(i915,
+							   SKL_DISP_PW_2));
+		return 0;
+	}
+
 	switch (DISPLAY_VER(i915)) {
 	case 12:
 	case 11:
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 653744d831af..ec55616811a2 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -1042,7 +1042,7 @@ static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
 	enum i915_power_well_id high_pg;
 
 	/* Power wells at this level and above must be disabled for DC5 entry */
-	if (DISPLAY_VER(dev_priv) >= 12)
+	if (DISPLAY_VER(dev_priv) == 12)
 		high_pg = ICL_DISP_PW_3;
 	else
 		high_pg = SKL_DISP_PW_2;
@@ -3022,6 +3022,113 @@ intel_display_power_put_mask_in_set(struct drm_i915_private *i915,
 	BIT_ULL(POWER_DOMAIN_AUX_B) |			\
 	BIT_ULL(POWER_DOMAIN_INIT))
 
+/*
+ * XE_LPD Power Domains
+ *
+ * Previous platforms required that PG(n-1) be enabled before PG(n).  That
+ * dependency chain turns into a dependency tree on XE_LPD:
+ *
+ *       PG0
+ *        |
+ *     --PG1--
+ *    /       \
+ *  PGA     --PG2--
+ *         /   |   \
+ *       PGB  PGC  PGD
+ *
+ * Power wells must be enabled from top to bottom and disabled from bottom
+ * to top.  This allows pipes to be power gated independently.
+ */
+
+#define XELPD_PW_D_POWER_DOMAINS (			\
+	BIT_ULL(POWER_DOMAIN_PIPE_D) |			\
+	BIT_ULL(POWER_DOMAIN_PIPE_D_PANEL_FITTER) |	\
+	BIT_ULL(POWER_DOMAIN_TRANSCODER_D) |		\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_C_POWER_DOMAINS (			\
+	BIT_ULL(POWER_DOMAIN_PIPE_C) |			\
+	BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) |	\
+	BIT_ULL(POWER_DOMAIN_TRANSCODER_C) |		\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_B_POWER_DOMAINS (			\
+	BIT_ULL(POWER_DOMAIN_PIPE_B) |			\
+	BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) |	\
+	BIT_ULL(POWER_DOMAIN_TRANSCODER_B) |		\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_A_POWER_DOMAINS (			\
+	BIT_ULL(POWER_DOMAIN_PIPE_A) |			\
+	BIT_ULL(POWER_DOMAIN_PIPE_A_PANEL_FITTER) |	\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_2_POWER_DOMAINS (			\
+	XELPD_PW_B_POWER_DOMAINS |			\
+	XELPD_PW_C_POWER_DOMAINS |			\
+	XELPD_PW_D_POWER_DOMAINS |			\
+	BIT_ULL(POWER_DOMAIN_AUDIO) |			\
+	BIT_ULL(POWER_DOMAIN_VGA) |			\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) |	\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_D_XELPD) |	\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_E_XELPD) |	\
+	BIT_ULL(POWER_DOMAIN_AUX_C) |			\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC1) |	\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC2) |	\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC3) |	\
+	BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC4) |	\
+	BIT_ULL(POWER_DOMAIN_AUX_C) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_D_XELPD) |		\
+	BIT_ULL(POWER_DOMAIN_AUX_E_XELPD) |		\
+	BIT_ULL(POWER_DOMAIN_AUX_USBC1) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_USBC2) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_USBC3) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_USBC4) |			\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
+/*
+ * XELPD PW_1/PG_1 domains (under HW/DMC control):
+ *  - DBUF function (registers are in PW0)
+ *  - Transcoder A
+ *  - DDI_A and DDI_B
+ *
+ * XELPD PW_0/PW_1 domains (under HW/DMC control):
+ *  - PCI
+ *  - Clocks except port PLL
+ *  - Shared functions:
+ *     * interrupts except pipe interrupts
+ *     * MBus except PIPE_MBUS_DBOX_CTL
+ *     * DBUF registers
+ *  - Central power except FBC
+ *  - Top-level GTC (DDI-level GTC is in the well associated with the DDI)
+ */
+
+#define XELPD_DISPLAY_DC_OFF_POWER_DOMAINS (		\
+	XELPD_PW_2_POWER_DOMAINS |			\
+	BIT_ULL(POWER_DOMAIN_MODESET) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_A) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_B) |			\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_AUX_IO_D_XELPD_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_AUX_D_XELPD)
+#define XELPD_AUX_IO_E_XELPD_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_AUX_E_XELPD)
+#define XELPD_AUX_IO_USBC1_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_AUX_USBC1)
+#define XELPD_AUX_IO_USBC2_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_AUX_USBC2)
+#define XELPD_AUX_IO_USBC3_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_AUX_USBC3)
+#define XELPD_AUX_IO_USBC4_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_AUX_USBC4)
+
+#define XELPD_AUX_IO_TBT1_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_AUX_TBT1)
+#define XELPD_AUX_IO_TBT2_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_AUX_TBT2)
+#define XELPD_AUX_IO_TBT3_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_AUX_TBT3)
+#define XELPD_AUX_IO_TBT4_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_AUX_TBT4)
+
+#define XELPD_DDI_IO_D_XELPD_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_D_XELPD)
+#define XELPD_DDI_IO_E_XELPD_POWER_DOMAINS	BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_E_XELPD)
+#define XELPD_DDI_IO_TC1_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC1)
+#define XELPD_DDI_IO_TC2_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC2)
+#define XELPD_DDI_IO_TC3_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC3)
+#define XELPD_DDI_IO_TC4_POWER_DOMAINS		BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC4)
+
 static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
 	.sync_hw = i9xx_power_well_sync_hw_noop,
 	.enable = i9xx_always_on_power_well_noop,
@@ -4526,6 +4633,319 @@ static const struct i915_power_well_desc rkl_power_wells[] = {
 	},
 };
 
+static const struct i915_power_well_desc xelpd_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = true,
+		.domains = POWER_DOMAIN_MASK,
+		.ops = &i9xx_always_on_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+	},
+	{
+		.name = "power well 1",
+		/* Handled by the DMC firmware */
+		.always_on = true,
+		.domains = 0,
+		.ops = &hsw_power_well_ops,
+		.id = SKL_DISP_PW_1,
+		{
+			.hsw.regs = &hsw_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_PW_1,
+			.hsw.has_fuses = true,
+		},
+	},
+	{
+		.name = "DC off",
+		.domains = XELPD_DISPLAY_DC_OFF_POWER_DOMAINS,
+		.ops = &gen9_dc_off_power_well_ops,
+		.id = SKL_DISP_DC_OFF,
+	},
+	{
+		.name = "power well 2",
+		.domains = XELPD_PW_2_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = SKL_DISP_PW_2,
+		{
+			.hsw.regs = &hsw_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_PW_2,
+			.hsw.has_vga = true,
+			.hsw.has_fuses = true,
+		},
+	},
+	{
+		.name = "power well A",
+		.domains = XELPD_PW_A_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &hsw_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_PW_A,
+			.hsw.irq_pipe_mask = BIT(PIPE_A),
+			.hsw.has_fuses = true,
+		},
+	},
+	{
+		.name = "power well B",
+		.domains = XELPD_PW_B_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &hsw_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_PW_B,
+			.hsw.irq_pipe_mask = BIT(PIPE_B),
+			.hsw.has_fuses = true,
+		},
+	},
+	{
+		.name = "power well C",
+		.domains = XELPD_PW_C_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &hsw_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_PW_C,
+			.hsw.irq_pipe_mask = BIT(PIPE_C),
+			.hsw.has_fuses = true,
+		},
+	},
+	{
+		.name = "power well D",
+		.domains = XELPD_PW_D_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &hsw_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_PW_D,
+			.hsw.irq_pipe_mask = BIT(PIPE_D),
+			.hsw.has_fuses = true,
+		},
+	},
+	{
+		.name = "DDI A IO",
+		.domains = ICL_DDI_IO_A_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_DDI_A,
+		}
+	},
+	{
+		.name = "DDI B IO",
+		.domains = ICL_DDI_IO_B_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_DDI_B,
+		}
+	},
+	{
+		.name = "DDI C IO",
+		.domains = ICL_DDI_IO_C_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_DDI_C,
+		}
+	},
+	{
+		.name = "DDI IO D_XELPD",
+		.domains = XELPD_DDI_IO_D_XELPD_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_DDI_D,
+		}
+	},
+	{
+		.name = "DDI IO E_XELPD",
+		.domains = XELPD_DDI_IO_E_XELPD_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_DDI_E,
+		}
+	},
+	{
+		.name = "DDI IO TC1",
+		.domains = XELPD_DDI_IO_TC1_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_DDI_TC1,
+		}
+	},
+	{
+		.name = "DDI IO TC2",
+		.domains = XELPD_DDI_IO_TC2_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_DDI_TC2,
+		}
+	},
+	{
+		.name = "DDI IO TC3",
+		.domains = XELPD_DDI_IO_TC3_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_DDI_TC3,
+		}
+	},
+	{
+		.name = "DDI IO TC4",
+		.domains = XELPD_DDI_IO_TC4_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_ddi_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_DDI_TC4,
+		}
+	},
+	{
+		.name = "AUX A",
+		.domains = ICL_AUX_A_IO_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_AUX_A,
+		},
+	},
+	{
+		.name = "AUX B",
+		.domains = ICL_AUX_B_IO_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_AUX_B,
+		},
+	},
+	{
+		.name = "AUX C",
+		.domains = TGL_AUX_C_IO_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = ICL_PW_CTL_IDX_AUX_C,
+		},
+	},
+	{
+		.name = "AUX D_XELPD",
+		.domains = XELPD_AUX_IO_D_XELPD_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_AUX_D,
+		},
+	},
+	{
+		.name = "AUX E_XELPD",
+		.domains = XELPD_AUX_IO_E_XELPD_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = XELPD_PW_CTL_IDX_AUX_E,
+		},
+	},
+	{
+		.name = "AUX USBC1",
+		.domains = XELPD_AUX_IO_USBC1_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TC1,
+		},
+	},
+	{
+		.name = "AUX USBC2",
+		.domains = XELPD_AUX_IO_USBC2_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TC2,
+		},
+	},
+	{
+		.name = "AUX USBC3",
+		.domains = XELPD_AUX_IO_USBC3_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TC3,
+		},
+	},
+	{
+		.name = "AUX USBC4",
+		.domains = XELPD_AUX_IO_USBC4_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TC4,
+		},
+	},
+	{
+		.name = "AUX TBT1",
+		.domains = XELPD_AUX_IO_TBT1_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TBT1,
+			.hsw.is_tc_tbt = true,
+		},
+	},
+	{
+		.name = "AUX TBT2",
+		.domains = XELPD_AUX_IO_TBT2_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TBT2,
+			.hsw.is_tc_tbt = true,
+		},
+	},
+	{
+		.name = "AUX TBT3",
+		.domains = XELPD_AUX_IO_TBT3_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TBT3,
+			.hsw.is_tc_tbt = true,
+		},
+	},
+	{
+		.name = "AUX TBT4",
+		.domains = XELPD_AUX_IO_TBT4_POWER_DOMAINS,
+		.ops = &icl_aux_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+		{
+			.hsw.regs = &icl_aux_power_well_regs,
+			.hsw.idx = TGL_PW_CTL_IDX_AUX_TBT4,
+			.hsw.is_tc_tbt = true,
+		},
+	},
+};
+
 static int
 sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
 				   int disable_power_well)
@@ -4690,6 +5110,8 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
 	if (!HAS_DISPLAY(dev_priv)) {
 		power_domains->power_well_count = 0;
 		err = 0;
+	} else if (DISPLAY_VER(dev_priv) >= 13) {
+		err = set_power_wells(power_domains, xelpd_power_wells);
 	} else if (IS_ALDERLAKE_S(dev_priv) || IS_DG1(dev_priv)) {
 		err = set_power_wells_mask(power_domains, tgl_power_wells,
 					   BIT_ULL(TGL_DISP_PW_TC_COLD_OFF));
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index acf47252d9e7..4f0917df4375 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -49,6 +49,9 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_PORT_DDI_LANES_TC5,
 	POWER_DOMAIN_PORT_DDI_LANES_TC6,
 
+	POWER_DOMAIN_PORT_DDI_LANES_D_XELPD = POWER_DOMAIN_PORT_DDI_LANES_TC5, /* XELPD */
+	POWER_DOMAIN_PORT_DDI_LANES_E_XELPD,
+
 	POWER_DOMAIN_PORT_DDI_A_IO,
 	POWER_DOMAIN_PORT_DDI_B_IO,
 	POWER_DOMAIN_PORT_DDI_C_IO,
@@ -66,6 +69,9 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_PORT_DDI_IO_TC5,
 	POWER_DOMAIN_PORT_DDI_IO_TC6,
 
+	POWER_DOMAIN_PORT_DDI_IO_D_XELPD = POWER_DOMAIN_PORT_DDI_IO_TC5, /* XELPD */
+	POWER_DOMAIN_PORT_DDI_IO_E_XELPD,
+
 	POWER_DOMAIN_PORT_DSI,
 	POWER_DOMAIN_PORT_CRT,
 	POWER_DOMAIN_PORT_OTHER,
@@ -88,6 +94,9 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_AUX_USBC5,
 	POWER_DOMAIN_AUX_USBC6,
 
+	POWER_DOMAIN_AUX_D_XELPD = POWER_DOMAIN_AUX_USBC5, /* XELPD */
+	POWER_DOMAIN_AUX_E_XELPD,
+
 	POWER_DOMAIN_AUX_IO_A,
 	POWER_DOMAIN_AUX_C_TBT,
 	POWER_DOMAIN_AUX_D_TBT,
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 42e3f9f7a37e..adcd6752f919 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -470,13 +470,13 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
 	 * POWER_DOMAIN_TRANSCODER_VDSC_PW2 power domain in two cases:
 	 *
 	 *  - ICL eDP/DSI transcoder
-	 *  - Gen12+ (except RKL) pipe A
+	 *  - Display version 12 (except RKL) pipe A
 	 *
 	 * For any other pipe, VDSC/joining uses the power well associated with
 	 * the pipe in use. Hence another reference on the pipe power domain
 	 * will suffice. (Except no VDSC/joining on ICL pipe A.)
 	 */
-	if (DISPLAY_VER(i915) >= 12 && !IS_ROCKETLAKE(i915) && pipe == PIPE_A)
+	if (DISPLAY_VER(i915) == 12 && !IS_ROCKETLAKE(i915) && pipe == PIPE_A)
 		return POWER_DOMAIN_TRANSCODER_VDSC_PW2;
 	else if (is_pipe_dsc(crtc_state))
 		return POWER_DOMAIN_PIPE(pipe);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e83d94cd0e6b..e070f2df6a87 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9650,6 +9650,12 @@ enum {
 #define   ICL_PW_CTL_IDX_PW_2			1
 #define   ICL_PW_CTL_IDX_PW_1			0
 
+/* XE_LPD - power wells */
+#define   XELPD_PW_CTL_IDX_PW_D			8
+#define   XELPD_PW_CTL_IDX_PW_C			7
+#define   XELPD_PW_CTL_IDX_PW_B			6
+#define   XELPD_PW_CTL_IDX_PW_A			5
+
 #define ICL_PWR_WELL_CTL_AUX1			_MMIO(0x45440)
 #define ICL_PWR_WELL_CTL_AUX2			_MMIO(0x45444)
 #define ICL_PWR_WELL_CTL_AUX4			_MMIO(0x4544C)
@@ -9664,7 +9670,9 @@ enum {
 #define   TGL_PW_CTL_IDX_AUX_TBT1		9
 #define   ICL_PW_CTL_IDX_AUX_TBT1		8
 #define   TGL_PW_CTL_IDX_AUX_TC6		8
+#define   XELPD_PW_CTL_IDX_AUX_E			8
 #define   TGL_PW_CTL_IDX_AUX_TC5		7
+#define   XELPD_PW_CTL_IDX_AUX_D			7
 #define   TGL_PW_CTL_IDX_AUX_TC4		6
 #define   ICL_PW_CTL_IDX_AUX_F			5
 #define   TGL_PW_CTL_IDX_AUX_TC3		5
@@ -9679,7 +9687,9 @@ enum {
 #define ICL_PWR_WELL_CTL_DDI1			_MMIO(0x45450)
 #define ICL_PWR_WELL_CTL_DDI2			_MMIO(0x45454)
 #define ICL_PWR_WELL_CTL_DDI4			_MMIO(0x4545C)
+#define   XELPD_PW_CTL_IDX_DDI_E			8
 #define   TGL_PW_CTL_IDX_DDI_TC6		8
+#define   XELPD_PW_CTL_IDX_DDI_D			7
 #define   TGL_PW_CTL_IDX_DDI_TC5		7
 #define   TGL_PW_CTL_IDX_DDI_TC4		6
 #define   ICL_PW_CTL_IDX_DDI_F			5
-- 
2.25.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-05-08  2:28 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-08  2:27 [Intel-gfx] [PATCH v3 00/48] Alder Lake-P Support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 01/48] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-05-12 21:37   ` Lucas De Marchi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 02/48] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 03/48] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 04/48] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-05-14 13:52   ` Imre Deak
2021-05-08  2:27 ` Matt Roper [this message]
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 06/48] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-05-12 17:56   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 07/48] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 08/48] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 09/48] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-05-12 18:11   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 10/48] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-05-13 19:18   ` Navare, Manasi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 11/48] drm/i915: Get slice height before computing rc params Matt Roper
2021-05-13 19:20   ` Navare, Manasi
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 12/48] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 13/48] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-05-08  2:52   ` [Intel-gfx] [PATCH v3.1 " Matt Roper
2021-05-12 22:28     ` Lucas De Marchi
2021-05-08  9:10   ` [Intel-gfx] [PATCH v3 " kernel test robot
2021-05-08  9:10     ` kernel test robot
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 14/48] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 15/48] drm/i915/xelpd: Provide port/phy mapping for vbt Matt Roper
2021-05-12 19:21   ` Srivatsa, Anusha
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 16/48] drm/i915/adl_p: Add PCH support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 17/48] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 18/48] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 19/48] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 20/48] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-05-14  9:06   ` Kahola, Mika
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 21/48] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 22/48] drm/i915/adl_p: Handle TC cold Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 23/48] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 24/48] drm/i915/adl_p: Enable modular fia Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 25/48] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 26/48] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-05-08  2:27 ` [Intel-gfx] [PATCH v3 27/48] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 28/48] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-05-12 17:03   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 29/48] drm/i915/adl_p: MBUS programming Matt Roper
2021-05-14 10:09   ` Lisovskiy, Stanislav
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 30/48] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 31/48] drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 32/48] drm/i915/display: Remove a redundant function argument from intel_psr_enable_source() Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 33/48] drm/i915/display: Add PSR interrupt error check function Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 34/48] drm/i915/display: Introduce new intel_psr_pause/resume function Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 35/48] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-05-12 19:49   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 36/48] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-05-12 23:07   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 37/48] drm/i915/adl_p: Add PLL Support Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 38/48] drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 39/48] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-05-12 22:11   ` Srivatsa, Anusha
2021-05-13 19:09   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 40/48] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-05-13 19:12   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 41/48] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-05-13 19:17   ` Navare, Manasi
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 42/48] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 43/48] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 44/48] drm/i915/adl_p: Add IPs stepping mapping Matt Roper
2021-05-12 22:35   ` Srivatsa, Anusha
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 45/48] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-05-14  9:35   ` Kahola, Mika
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 46/48] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-05-14 11:11   ` Kahola, Mika
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 47/48] drm/i915/adl_p: Disable CCS on a-step (Wa_22011186057) Matt Roper
2021-05-08  2:28 ` [Intel-gfx] [PATCH v3 48/48] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-05-08  2:48 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Alder Lake-P Support Patchwork
2021-05-08  3:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Alder Lake-P Support (rev2) Patchwork
2021-05-08  3:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-05-08  3:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-05-08  5:03 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210508022820.780227-6-matthew.d.roper@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.