[RFC PATCH 1/3] linux-headers: update against 5.12 and "manual clear vfio dirty log" series

[Kunkun Jiang <jiangkunkun@huawei.com>]

From: Zenghui Yu <yuzenghui@huawei.com>

The new capability VFIO_DIRTY_LOG_MANUAL_CLEAR and the new ioctl
VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP_NOCLEAR and
VFIO_IOMMU_DIRTY_PAGES_FLAG_CLEAR_BITMAP have been introduced in
the kernel, update the header to add them.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
---
 linux-headers/linux/vfio.h | 61 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h
index 609099e455..7e918c697f 100644
--- a/linux-headers/linux/vfio.h
+++ b/linux-headers/linux/vfio.h
@@ -46,6 +46,20 @@
  */
 #define VFIO_NOIOMMU_IOMMU		8
 
+/* Supports VFIO_DMA_UNMAP_FLAG_ALL */
+#define VFIO_UNMAP_ALL			9
+
+/* Supports the vaddr flag for DMA map and unmap */
+#define VFIO_UPDATE_VADDR		10
+
+/*
+ * The vfio_iommu driver may support user clears dirty log manually, which means
+ * dirty log is not cleared automatically after dirty log is copied to userspace,
+ * it's user's duty to clear dirty log. Note: when user queries this extension
+ * and vfio_iommu driver supports it, then it is enabled.
+ */
+#define VFIO_DIRTY_LOG_MANUAL_CLEAR	11
+
 /*
  * The IOCTL interface is designed for extensibility by embedding the
  * structure length (argsz) and flags into structures passed between
@@ -1074,12 +1088,22 @@ struct vfio_iommu_type1_info_dma_avail {
  *
  * Map process virtual addresses to IO virtual addresses using the
  * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ *
+ * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova, and
+ * unblock translation of host virtual addresses in the iova range.  The vaddr
+ * must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR.  To
+ * maintain memory consistency within the user application, the updated vaddr
+ * must address the same memory object as originally mapped.  Failure to do so
+ * will result in user memory corruption and/or device misbehavior.  iova and
+ * size must match those in the original MAP_DMA call.  Protection is not
+ * changed, and the READ & WRITE flags must be 0.
  */
 struct vfio_iommu_type1_dma_map {
 	__u32	argsz;
 	__u32	flags;
 #define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
+#define VFIO_DMA_MAP_FLAG_VADDR (1 << 2)
 	__u64	vaddr;				/* Process virtual address */
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
@@ -1102,6 +1126,7 @@ struct vfio_bitmap {
  * field.  No guarantee is made to the user that arbitrary unmaps of iova
  * or size different from those used in the original mapping call will
  * succeed.
+ *
  * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
  * before unmapping IO virtual addresses. When this flag is set, the user must
  * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
@@ -1111,11 +1136,21 @@ struct vfio_bitmap {
  * indicates that the page at that offset from iova is dirty. A Bitmap of the
  * pages in the range of unmapped size is returned in the user-provided
  * vfio_bitmap.data.
+ *
+ * If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses.  iova and size
+ * must be 0.  This cannot be combined with the get-dirty-bitmap flag.
+ *
+ * If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
+ * virtual addresses in the iova range.  Tasks that attempt to translate an
+ * iova's vaddr will block.  DMA to already-mapped pages continues.  This
+ * cannot be combined with the get-dirty-bitmap flag.
  */
 struct vfio_iommu_type1_dma_unmap {
 	__u32	argsz;
 	__u32	flags;
 #define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
+#define VFIO_DMA_UNMAP_FLAG_ALL		     (1 << 1)
+#define VFIO_DMA_UNMAP_FLAG_VADDR	     (1 << 2)
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
 	__u8    data[];
@@ -1161,7 +1196,29 @@ struct vfio_iommu_type1_dma_unmap {
  * actual bitmap. If dirty pages logging is not enabled, an error will be
  * returned.
  *
- * Only one of the flags _START, _STOP and _GET may be specified at a time.
+ * The VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP_NOCLEAR flag is almost same as
+ * VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP, except that it requires underlying
+ * dirty bitmap is not cleared automatically. The user can clear it manually by
+ * calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_CLEAR_BITMAP flag set.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_CLEAR_BITMAP flag set,
+ * instructs the IOMMU driver to clear the dirty status of pages in a bitmap
+ * for IOMMU container for a given IOVA range. The user must specify the IOVA
+ * range, the bitmap and the pgsize through the structure
+ * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
+ * supports clearing a bitmap of the smallest supported pgsize only and can be
+ * modified in future to clear a bitmap of any specified supported pgsize. The
+ * user must provide a memory area for the bitmap memory and specify its size
+ * in bitmap.size. One bit is used to represent one page consecutively starting
+ * from iova offset. The user should provide page size in bitmap.pgsize field.
+ * A bit set in the bitmap indicates that the page at that offset from iova is
+ * cleared the dirty status, and dirty tracking is re-enabled for that page. The
+ * caller must set argsz to a value including the size of structure
+ * vfio_iommu_dirty_bitmap_get, but excluing the size of the actual bitmap. If
+ * dirty pages logging is not enabled, an error will be returned.
+ *
+ * Only one of the flags _START, _STOP, _GET, _GET_NOCLEAR, and _CLEAR may be
+ * specified at a time.
  *
  */
 struct vfio_iommu_type1_dirty_bitmap {
@@ -1170,6 +1227,8 @@ struct vfio_iommu_type1_dirty_bitmap {
 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_START	(1 << 0)
 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP	(1 << 1)
 #define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP	(1 << 2)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP_NOCLEAR	(1 << 3)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_CLEAR_BITMAP	(1 << 4)
 	__u8         data[];
 };
 
-- 
2.23.0