All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: robert.foss@linaro.org, andrey.konovalov@linaro.org,
	Todor Tomov <todor.too@gmail.com>, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	linux-media@vger.kernel.org (open list:QUALCOMM CAMERA SUBSYSTEM
	DRIVER), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 12/17] media: camss: vfe-170: clean up some dead code
Date: Tue, 11 May 2021 14:07:19 -0400	[thread overview]
Message-ID: <20210511180728.23781-13-jonathan@marek.ca> (raw)
In-Reply-To: <20210511180728.23781-1-jonathan@marek.ca>

vfe_isr_read()/vfe_isr_halt_ack()/vfe_reg_clr() are never called.

vfe_isr_sof() does nothing, remove it.

The only vfe_reg_set() usage can be easily replaced with a writel.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 .../media/platform/qcom/camss/camss-vfe-170.c | 53 +------------------
 1 file changed, 2 insertions(+), 51 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 8594d275b41d..076ca082e107 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -188,20 +188,6 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
 	dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
 }
 
-static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
-{
-	u32 bits = readl_relaxed(vfe->base + reg);
-
-	writel_relaxed(bits & ~clr_bits, vfe->base + reg);
-}
-
-static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
-{
-	u32 bits = readl_relaxed(vfe->base + reg);
-
-	writel_relaxed(bits | set_bits, vfe->base + reg);
-}
-
 static void vfe_global_reset(struct vfe_device *vfe)
 {
 	u32 reset_bits = GLOBAL_RESET_CMD_CORE		|
@@ -305,32 +291,14 @@ static inline void vfe_reg_update_clear(struct vfe_device *vfe,
 
 static void vfe_enable_irq_common(struct vfe_device *vfe)
 {
-	vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
-	vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
+	writel_relaxed(~0u, vfe->base + VFE_IRQ_MASK_0);
+	writel_relaxed(~0u, vfe->base + VFE_IRQ_MASK_1);
 
 	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
 	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
 	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
 }
 
-static void vfe_isr_halt_ack(struct vfe_device *vfe)
-{
-	complete(&vfe->halt_complete);
-}
-
-static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
-{
-	*status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
-	*status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
-
-	writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
-	writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
-
-	/* Enforce ordering between IRQ Clear and Global IRQ Clear */
-	wmb();
-	writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
-}
-
 static void vfe_violation_read(struct vfe_device *vfe)
 {
 	u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
@@ -375,10 +343,6 @@ static irqreturn_t vfe_isr(int irq, void *dev)
 		if (status0 & STATUS_0_RDI_REG_UPDATE(i))
 			vfe->isr_ops.reg_update(vfe, i);
 
-	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
-		if (status0 & STATUS_1_RDI_SOF(i))
-			vfe->isr_ops.sof(vfe, i);
-
 	for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
 		if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
 			vfe->isr_ops.comp_done(vfe, i);
@@ -607,16 +571,6 @@ static int vfe_disable(struct vfe_line *line)
 	return 0;
 }
 
-/*
- * vfe_isr_sof - Process start of frame interrupt
- * @vfe: VFE Device
- * @line_id: VFE line
- */
-static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
-	/* nop */
-}
-
 /*
  * vfe_isr_reg_update - Process reg update interrupt
  * @vfe: VFE Device
@@ -749,9 +703,7 @@ static int vfe_queue_buffer(struct camss_video *vid,
 
 static const struct vfe_isr_ops vfe_isr_ops_170 = {
 	.reset_ack = vfe_isr_reset_ack,
-	.halt_ack = vfe_isr_halt_ack,
 	.reg_update = vfe_isr_reg_update,
-	.sof = vfe_isr_sof,
 	.comp_done = vfe_isr_comp_done,
 	.wm_done = vfe_isr_wm_done,
 };
@@ -772,7 +724,6 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
 const struct vfe_hw_ops vfe_ops_170 = {
 	.global_reset = vfe_global_reset,
 	.hw_version_read = vfe_hw_version_read,
-	.isr_read = vfe_isr_read,
 	.isr = vfe_isr,
 	.pm_domain_off = vfe_pm_domain_off,
 	.pm_domain_on = vfe_pm_domain_on,
-- 
2.26.1


  parent reply	other threads:[~2021-05-11 18:08 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 18:07 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-05-11 18:07 ` [PATCH 01/17] media: camss: csiphy-3ph: don't print HW version as an error Jonathan Marek
2021-05-19 10:16   ` Robert Foss
2021-05-11 18:07 ` [PATCH 02/17] media: camss: csiphy-3ph: disable interrupts Jonathan Marek
2021-05-19 15:52   ` Robert Foss
2021-05-11 18:07 ` [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Jonathan Marek
2021-05-19 16:26   ` Robert Foss
2021-05-25 17:19   ` Andrey Konovalov
2021-05-25 17:35     ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 04/17] media: camss: csid-170: fix non-10bit formats Jonathan Marek
2021-05-20 10:31   ` Robert Foss
2021-05-25 18:15   ` Andrey Konovalov
2021-05-25 18:38     ` Jonathan Marek
2021-05-26 13:59       ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 05/17] media: camss: csid-170: don't enable unused irqs Jonathan Marek
2021-05-20 10:39   ` Robert Foss
2021-05-11 18:07 ` [PATCH 06/17] media: camss: csid-170: remove stray comment Jonathan Marek
2021-05-20 10:57   ` Robert Foss
2021-05-11 18:07 ` [PATCH 07/17] media: camss: csid-170: support more than one lite vfe Jonathan Marek
2021-05-20 11:54   ` Robert Foss
2021-05-11 18:07 ` [PATCH 08/17] media: camss: csid-170: set the right HALF_CMD when disabled Jonathan Marek
2021-05-20 11:10   ` Robert Foss
2021-05-11 18:07 ` [PATCH 09/17] media: camss: csid: allow csid to work without a regulator Jonathan Marek
2021-05-20 12:14   ` Robert Foss
2021-05-11 18:07 ` [PATCH 10/17] media: camss: remove vdda-csiN from sdm845 resources Jonathan Marek
2021-05-31 11:02   ` Robert Foss
2021-05-11 18:07 ` [PATCH 11/17] media: camss: fix VFE irq name Jonathan Marek
2021-05-31 11:03   ` Robert Foss
2021-05-11 18:07 ` Jonathan Marek [this message]
2021-05-31 11:11   ` [PATCH 12/17] media: camss: vfe-170: clean up some dead code Robert Foss
2021-05-11 18:07 ` [PATCH 13/17] media: camss: vfe-170: fix "VFE halt timeout" error Jonathan Marek
2021-05-31 11:13   ` Robert Foss
2021-05-11 18:07 ` [PATCH 14/17] media: camss: Add initial support for VFE hardware version Titan 480 Jonathan Marek
2021-05-31 12:13   ` Robert Foss
2021-06-08 23:08     ` Jonathan Marek
2021-06-09 15:06       ` Robert Foss
2021-05-11 18:07 ` [PATCH 15/17] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Jonathan Marek
2021-05-31 12:14   ` Robert Foss
2021-05-11 18:07 ` [PATCH 16/17] media: camss: add support for SM8250 camss Jonathan Marek
2021-05-31 16:07   ` Robert Foss
2021-05-11 18:07 ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Jonathan Marek
2021-05-12 18:35   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511180728.23781-13-jonathan@marek.ca \
    --to=jonathan@marek.ca \
    --cc=agross@kernel.org \
    --cc=andrey.konovalov@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robert.foss@linaro.org \
    --cc=todor.too@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.