From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linus.walleij@linaro.org, kishon@ti.com,
vkoul@kernel.org, jay.xu@rock-chips.com,
shawn.lin@rock-chips.com, david.wu@rock-chips.com,
zhangqing@rock-chips.com, huangtao@rock-chips.com,
cl@rock-chips.com, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
Date: Wed, 12 May 2021 14:23:43 +0200 [thread overview]
Message-ID: <20210512122346.9463-2-jbx6244@gmail.com> (raw)
In-Reply-To: <20210512122346.9463-1-jbx6244@gmail.com>
Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Add "#phy-cells", because it is a required property
by phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 -------------
.../devicetree/bindings/phy/rockchip-usb-phy.yaml | 86 ++++++++++++++++++++++
2 files changed, 86 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046..000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
- "rockchip,rk3066a-usb-phy"
- "rockchip,rk3188-usb-phy"
- "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
- register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
- "0x320" - for PHY attach to OTG controller
- "0x334" - for PHY attach to HOST0 controller
- "0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
- compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
- usbphy: phy {
- compatible = "rockchip,rk3288-usb-phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy0 {
- #phy-cells = <0>;
- reg = <0x320>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000..3b6b39da0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-usb-phy
+ - items:
+ - enum:
+ - rockchip,rk3066a-usb-phy
+ - rockchip,rk3188-usb-phy
+ - const: rockchip,rk3288-usb-phy
+
+ "#phy-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#phy-cells"
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "usb-phy@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phyclk
+
+ "#clock-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy-reset
+
+ vbus-supply:
+ description: phandle for vbus power source
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ usbphy: usbphy {
+ compatible = "rockchip,rk3288-usb-phy";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@320 {
+ reg = <0x320>;
+ #phy-cells = <0>;
+ };
+ };
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linus.walleij@linaro.org, kishon@ti.com,
vkoul@kernel.org, jay.xu@rock-chips.com,
shawn.lin@rock-chips.com, david.wu@rock-chips.com,
zhangqing@rock-chips.com, huangtao@rock-chips.com,
cl@rock-chips.com, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
Date: Wed, 12 May 2021 14:23:43 +0200 [thread overview]
Message-ID: <20210512122346.9463-2-jbx6244@gmail.com> (raw)
In-Reply-To: <20210512122346.9463-1-jbx6244@gmail.com>
Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Add "#phy-cells", because it is a required property
by phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 -------------
.../devicetree/bindings/phy/rockchip-usb-phy.yaml | 86 ++++++++++++++++++++++
2 files changed, 86 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046..000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
- "rockchip,rk3066a-usb-phy"
- "rockchip,rk3188-usb-phy"
- "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
- register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
- "0x320" - for PHY attach to OTG controller
- "0x334" - for PHY attach to HOST0 controller
- "0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
- compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
- usbphy: phy {
- compatible = "rockchip,rk3288-usb-phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy0 {
- #phy-cells = <0>;
- reg = <0x320>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000..3b6b39da0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-usb-phy
+ - items:
+ - enum:
+ - rockchip,rk3066a-usb-phy
+ - rockchip,rk3188-usb-phy
+ - const: rockchip,rk3288-usb-phy
+
+ "#phy-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#phy-cells"
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "usb-phy@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phyclk
+
+ "#clock-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy-reset
+
+ vbus-supply:
+ description: phandle for vbus power source
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ usbphy: usbphy {
+ compatible = "rockchip,rk3288-usb-phy";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@320 {
+ reg = <0x320>;
+ #phy-cells = <0>;
+ };
+ };
--
2.11.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linus.walleij@linaro.org, kishon@ti.com,
vkoul@kernel.org, jay.xu@rock-chips.com,
shawn.lin@rock-chips.com, david.wu@rock-chips.com,
zhangqing@rock-chips.com, huangtao@rock-chips.com,
cl@rock-chips.com, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
Date: Wed, 12 May 2021 14:23:43 +0200 [thread overview]
Message-ID: <20210512122346.9463-2-jbx6244@gmail.com> (raw)
In-Reply-To: <20210512122346.9463-1-jbx6244@gmail.com>
Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Add "#phy-cells", because it is a required property
by phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 -------------
.../devicetree/bindings/phy/rockchip-usb-phy.yaml | 86 ++++++++++++++++++++++
2 files changed, 86 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046..000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
- "rockchip,rk3066a-usb-phy"
- "rockchip,rk3188-usb-phy"
- "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
- register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
- "0x320" - for PHY attach to OTG controller
- "0x334" - for PHY attach to HOST0 controller
- "0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
- compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
- usbphy: phy {
- compatible = "rockchip,rk3288-usb-phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy0 {
- #phy-cells = <0>;
- reg = <0x320>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000..3b6b39da0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-usb-phy
+ - items:
+ - enum:
+ - rockchip,rk3066a-usb-phy
+ - rockchip,rk3188-usb-phy
+ - const: rockchip,rk3288-usb-phy
+
+ "#phy-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#phy-cells"
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "usb-phy@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phyclk
+
+ "#clock-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy-reset
+
+ vbus-supply:
+ description: phandle for vbus power source
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ usbphy: usbphy {
+ compatible = "rockchip,rk3288-usb-phy";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@320 {
+ reg = <0x320>;
+ #phy-cells = <0>;
+ };
+ };
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linus.walleij@linaro.org, kishon@ti.com,
vkoul@kernel.org, jay.xu@rock-chips.com,
shawn.lin@rock-chips.com, david.wu@rock-chips.com,
zhangqing@rock-chips.com, huangtao@rock-chips.com,
cl@rock-chips.com, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
Date: Wed, 12 May 2021 14:23:43 +0200 [thread overview]
Message-ID: <20210512122346.9463-2-jbx6244@gmail.com> (raw)
In-Reply-To: <20210512122346.9463-1-jbx6244@gmail.com>
Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Add "#phy-cells", because it is a required property
by phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 -------------
.../devicetree/bindings/phy/rockchip-usb-phy.yaml | 86 ++++++++++++++++++++++
2 files changed, 86 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046..000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
- "rockchip,rk3066a-usb-phy"
- "rockchip,rk3188-usb-phy"
- "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
- register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
- "0x320" - for PHY attach to OTG controller
- "0x334" - for PHY attach to HOST0 controller
- "0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
- compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
- usbphy: phy {
- compatible = "rockchip,rk3288-usb-phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy0 {
- #phy-cells = <0>;
- reg = <0x320>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000..3b6b39da0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-usb-phy
+ - items:
+ - enum:
+ - rockchip,rk3066a-usb-phy
+ - rockchip,rk3188-usb-phy
+ - const: rockchip,rk3288-usb-phy
+
+ "#phy-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#phy-cells"
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "usb-phy@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phyclk
+
+ "#clock-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy-reset
+
+ vbus-supply:
+ description: phandle for vbus power source
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ usbphy: usbphy {
+ compatible = "rockchip,rk3288-usb-phy";
+ #phy-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@320 {
+ reg = <0x320>;
+ #phy-cells = <0>;
+ };
+ };
--
2.11.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2021-05-12 12:24 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 12:23 [PATCH v5 0/4] convert grf.txt to YAML Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker [this message]
2021-05-12 12:23 ` [PATCH v5 1/4] dt-bindings: phy: convert rockchip-usb-phy.txt " Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-18 1:04 ` Rob Herring
2021-05-18 1:04 ` Rob Herring
2021-05-18 1:04 ` Rob Herring
2021-05-18 1:04 ` Rob Herring
2021-05-12 12:23 ` [PATCH v5 2/4] dt-bindings: soc: rockchip: convert grf.txt " Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-13 2:28 ` Rob Herring
2021-05-13 2:28 ` Rob Herring
2021-05-13 2:28 ` Rob Herring
2021-05-13 2:28 ` Rob Herring
2021-05-12 12:23 ` [PATCH v5 3/4] ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188 Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` [PATCH v5 4/4] arm64: dts: rename grf-gpio nodename in rk3328.dtsi Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-12 12:23 ` Johan Jonker
2021-05-14 16:37 ` (subset) [PATCH v5 0/4] convert grf.txt to YAML Heiko Stuebner
2021-05-14 16:37 ` Heiko Stuebner
2021-05-14 16:37 ` Heiko Stuebner
2021-05-14 16:37 ` Heiko Stuebner
2021-05-19 15:17 ` Rob Herring
2021-05-19 15:17 ` Rob Herring
2021-05-19 15:17 ` Rob Herring
2021-05-19 15:17 ` Rob Herring
2021-05-19 23:18 ` Heiko Stübner
2021-05-19 23:18 ` Heiko Stübner
2021-05-19 23:18 ` Heiko Stübner
2021-05-19 23:18 ` Heiko Stübner
2021-05-31 11:57 ` Heiko Stuebner
2021-05-31 11:57 ` Heiko Stuebner
2021-05-31 11:57 ` Heiko Stuebner
2021-05-31 11:57 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210512122346.9463-2-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=cl@rock-chips.com \
--cc=david.wu@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=jay.xu@rock-chips.com \
--cc=kishon@ti.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=vkoul@kernel.org \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.