[PATCH] ufs: Increase the usable queue depth

[Bart Van Assche <bvanassche@acm.org>]

With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request
and hence reduces the usable queue depth.

The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue. Hence this patch that adds a blk_mq_start_request()
call in ufshcd_exec_dev_cmd(). This patch doubles the queue depth on my
test setup from 16 to 32.

In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().

Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c96e36aab989..e669243354da 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2838,7 +2838,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
  * ufshcd_exec_dev_cmd - API for sending device management requests
  * @hba: UFS hba
  * @cmd_type: specifies the type (NOP, Query...)
- * @timeout: time in seconds
+ * @timeout: timeout in milliseconds
  *
  * NOTE: Since there is only one available tag for device management commands,
  * it is expected you hold the hba->dev_cmd.lock mutex.
@@ -2868,6 +2868,9 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	}
 	tag = req->tag;
 	WARN_ON_ONCE(!ufshcd_valid_tag(hba, tag));
+	/* Set the timeout such that the SCSI error handler is not activated. */
+	req->timeout = msecs_to_jiffies(2 * timeout);
+	blk_mq_start_request(req);
 
 	init_completion(&wait);
 	lrbp = &hba->lrb[tag];