From: Tobias Schramm <t.schramm@manjaro.org> To: "Jernej Škrabec" <jernej.skrabec@gmail.com>, devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Tobias Schramm <t.schramm@manjaro.org> Subject: [PATCH v2 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Date: Fri, 14 May 2021 01:30:24 +0200 [thread overview] Message-ID: <20210513233024.2076725-8-t.schramm@manjaro.org> (raw) In-Reply-To: <20210513233024.2076725-1-t.schramm@manjaro.org> The Allwinner V3 SoC features an I2S interface. The I2S peripheral is identical to that in the Allwinner H3 SoC. This commit adds it to the Allwinner V3 dts. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm/boot/dts/sun8i-v3.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index 8af790d286b9..3698e024d604 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -1,10 +1,31 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io> + * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> */ #include "sun8i-v3s.dtsi" +/ { + soc { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins>; + resets = <&ccu RST_BUS_I2S0>; + status = "disabled"; + }; + }; +}; + &ccu { compatible = "allwinner,sun8i-v3-ccu"; }; @@ -30,6 +51,11 @@ external_mdio: mdio@2 { &pio { compatible = "allwinner,sun8i-v3-pinctrl"; + i2s0_pins: i2s0-pins { + pins = "PG10", "PG11", "PG12", "PG13"; + function = "i2s"; + }; + uart1_pg_pins: uart1-pg-pins { pins = "PG6", "PG7"; function = "uart1"; -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Tobias Schramm <t.schramm@manjaro.org> To: "Jernej Škrabec" <jernej.skrabec@gmail.com>, devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Tobias Schramm <t.schramm@manjaro.org> Subject: [PATCH v2 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Date: Fri, 14 May 2021 01:30:24 +0200 [thread overview] Message-ID: <20210513233024.2076725-8-t.schramm@manjaro.org> (raw) In-Reply-To: <20210513233024.2076725-1-t.schramm@manjaro.org> The Allwinner V3 SoC features an I2S interface. The I2S peripheral is identical to that in the Allwinner H3 SoC. This commit adds it to the Allwinner V3 dts. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm/boot/dts/sun8i-v3.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi index 8af790d286b9..3698e024d604 100644 --- a/arch/arm/boot/dts/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -1,10 +1,31 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io> + * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> */ #include "sun8i-v3s.dtsi" +/ { + soc { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins>; + resets = <&ccu RST_BUS_I2S0>; + status = "disabled"; + }; + }; +}; + &ccu { compatible = "allwinner,sun8i-v3-ccu"; }; @@ -30,6 +51,11 @@ external_mdio: mdio@2 { &pio { compatible = "allwinner,sun8i-v3-pinctrl"; + i2s0_pins: i2s0-pins { + pins = "PG10", "PG11", "PG12", "PG13"; + function = "i2s"; + }; + uart1_pg_pins: uart1-pg-pins { pins = "PG6", "PG7"; function = "uart1"; -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-13 23:29 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-13 23:30 [PATCH v2 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-13 23:30 ` [PATCH v2 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-14 7:07 ` Andre Przywara 2021-05-14 7:07 ` Andre Przywara 2021-05-13 23:30 ` [PATCH v2 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-14 7:07 ` Andre Przywara 2021-05-14 7:07 ` Andre Przywara 2021-05-13 23:30 ` [PATCH v2 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-13 23:30 ` [PATCH v2 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-14 13:06 ` Rob Herring 2021-05-14 13:06 ` Rob Herring 2021-05-13 23:30 ` [PATCH v2 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-13 23:30 ` [PATCH v2 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm 2021-05-13 23:30 ` Tobias Schramm [this message] 2021-05-13 23:30 ` [PATCH v2 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Tobias Schramm
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210513233024.2076725-8-t.schramm@manjaro.org \ --to=t.schramm@manjaro.org \ --cc=devicetree@vger.kernel.org \ --cc=jernej.skrabec@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.