All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tobias Schramm <t.schramm@manjaro.org>
To: linux-usb@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Tobias Schramm <t.schramm@manjaro.org>
Subject: [PATCH 2/4] phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy
Date: Fri, 14 May 2021 12:27:32 +0200	[thread overview]
Message-ID: <20210514102734.2091238-3-t.schramm@manjaro.org> (raw)
In-Reply-To: <20210514102734.2091238-1-t.schramm@manjaro.org>

The RK3308 SoC uses a slightly different USB phy than other Rockchip
parts.
This commit adds support for that phy.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 46ebdb1460a3..beacac1dd253 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1256,6 +1256,49 @@ static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x3020, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x3024, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x3028, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x3020, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x3024, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x3028, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 8, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x3020, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x3024, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x3028, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x0120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1425,6 +1468,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+	{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: Tobias Schramm <t.schramm@manjaro.org>
To: linux-usb@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Tobias Schramm <t.schramm@manjaro.org>
Subject: [PATCH 2/4] phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy
Date: Fri, 14 May 2021 12:27:32 +0200	[thread overview]
Message-ID: <20210514102734.2091238-3-t.schramm@manjaro.org> (raw)
In-Reply-To: <20210514102734.2091238-1-t.schramm@manjaro.org>

The RK3308 SoC uses a slightly different USB phy than other Rockchip
parts.
This commit adds support for that phy.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 46ebdb1460a3..beacac1dd253 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1256,6 +1256,49 @@ static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x3020, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x3024, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x3028, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x3020, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x3024, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x3028, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 8, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x3020, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x3024, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x3028, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x0120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1425,6 +1468,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+	{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
-- 
2.31.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Tobias Schramm <t.schramm@manjaro.org>
To: linux-usb@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Tobias Schramm <t.schramm@manjaro.org>
Subject: [PATCH 2/4] phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy
Date: Fri, 14 May 2021 12:27:32 +0200	[thread overview]
Message-ID: <20210514102734.2091238-3-t.schramm@manjaro.org> (raw)
In-Reply-To: <20210514102734.2091238-1-t.schramm@manjaro.org>

The RK3308 SoC uses a slightly different USB phy than other Rockchip
parts.
This commit adds support for that phy.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 46ebdb1460a3..beacac1dd253 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1256,6 +1256,49 @@ static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x3020, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x3024, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x3028, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x3020, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x3024, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x3028, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 8, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x3020, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x3024, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x3028, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x0120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1425,6 +1468,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+	{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Tobias Schramm <t.schramm@manjaro.org>
To: linux-usb@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Tobias Schramm <t.schramm@manjaro.org>
Subject: [PATCH 2/4] phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy
Date: Fri, 14 May 2021 12:27:32 +0200	[thread overview]
Message-ID: <20210514102734.2091238-3-t.schramm@manjaro.org> (raw)
In-Reply-To: <20210514102734.2091238-1-t.schramm@manjaro.org>

The RK3308 SoC uses a slightly different USB phy than other Rockchip
parts.
This commit adds support for that phy.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 46ebdb1460a3..beacac1dd253 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1256,6 +1256,49 @@ static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x3020, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x3024, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x3028, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x3020, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x3024, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x3028, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 8, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x3020, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x3024, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x3028, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x0120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x0120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1425,6 +1468,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+	{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
-- 
2.31.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2021-05-14 10:26 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 10:27 [PATCH 0/4] Add USB support for RK3308 SoC Tobias Schramm
2021-05-14 10:27 ` Tobias Schramm
2021-05-14 10:27 ` Tobias Schramm
2021-05-14 10:27 ` Tobias Schramm
2021-05-14 10:27 ` [PATCH 1/4] Documentation: bindings: phy: add compatible for RK3308 USB phy Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27 ` Tobias Schramm [this message]
2021-05-14 10:27   ` [PATCH 2/4] phy: phy-rockchip-inno-usb2: add support " Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27 ` [PATCH 3/4] dt-bindings: usb: dwc2: add compatible for RK3308 USB controller Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27 ` [PATCH 4/4] arm64: dts: rockchip: add USB support to RK3308 dts Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 10:27   ` Tobias Schramm
2021-05-14 12:09   ` Johan Jonker
2021-05-14 12:09     ` Johan Jonker
2021-05-14 12:09     ` Johan Jonker
2021-05-14 12:09     ` Johan Jonker
2021-05-14 12:52     ` Tobias Schramm
2021-05-14 12:52       ` Tobias Schramm
2021-05-14 12:52       ` Tobias Schramm
2021-05-14 12:52       ` Tobias Schramm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210514102734.2091238-3-t.schramm@manjaro.org \
    --to=t.schramm@manjaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.