[PULL kvm-unit-tests 08/10] arm/arm64: setup: Consolidate memory layout assumptions

[Andrew Jones <drjones@redhat.com>]

Keep as much memory layout assumptions as possible in init::start
and a single setup function. This prepares us for calling setup()
from different start functions which have been linked with different
linker scripts. To do this, stacktop is only referenced from
init::start, making freemem_start a parameter to setup(). We also
split mem_init() into three parts, one that populates the mem regions
per the DT, one that populates the mem regions per assumptions,
and one that does the mem init. The concept of a primary region
is dropped, but we add a sanity check for the absence of memory
holes, because we don't know how to deal with them yet.

Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 arm/cstart.S        |   4 +-
 arm/cstart64.S      |   2 +
 arm/flat.lds        |  23 ++++++
 lib/arm/asm/setup.h |   8 +-
 lib/arm/mmu.c       |   2 -
 lib/arm/setup.c     | 175 ++++++++++++++++++++++++--------------------
 6 files changed, 128 insertions(+), 86 deletions(-)

diff --git a/arm/cstart.S b/arm/cstart.S
index bf3c78157e6a..446966de350d 100644
--- a/arm/cstart.S
+++ b/arm/cstart.S
@@ -80,7 +80,9 @@ start:
 
 	/* complete setup */
 	pop	{r0-r1}
-	bl	setup
+	mov	r3, #0
+	ldr	r2, =stacktop		@ r2,r3 is the base of free memory
+	bl	setup			@ r0 is the addr of the dtb
 
 	/* run the test */
 	ldr	r0, =__argc
diff --git a/arm/cstart64.S b/arm/cstart64.S
index 27251fe8b5cd..42ba3a3ca249 100644
--- a/arm/cstart64.S
+++ b/arm/cstart64.S
@@ -92,6 +92,8 @@ start:
 	bl	exceptions_init
 
 	/* complete setup */
+	adrp	x1, stacktop
+	add	x1, x1, :lo12:stacktop		// x1 is the base of free memory
 	bl	setup				// x0 is the addr of the dtb
 
 	/* run the test */
diff --git a/arm/flat.lds b/arm/flat.lds
index 6ed377c0eaa0..6fb459efb815 100644
--- a/arm/flat.lds
+++ b/arm/flat.lds
@@ -1,3 +1,26 @@
+/*
+ * init::start will pass stacktop to setup() as the base of free memory.
+ * setup() will then move the FDT and initrd to that base before calling
+ * mem_init(). With those movements and this linker script, we'll end up
+ * having the following memory layout:
+ *
+ *    +----------------------+   <-- top of physical memory
+ *    |                      |
+ *    ~                      ~
+ *    |                      |
+ *    +----------------------+   <-- top of initrd
+ *    |                      |
+ *    +----------------------+   <-- top of FDT
+ *    |                      |
+ *    +----------------------+   <-- top of cpu0's stack
+ *    |                      |
+ *    +----------------------+   <-- top of text/data/bss sections
+ *    |                      |
+ *    |                      |
+ *    +----------------------+   <-- load address
+ *    |                      |
+ *    +----------------------+   <-- physical address 0x0
+ */
 
 SECTIONS
 {
diff --git a/lib/arm/asm/setup.h b/lib/arm/asm/setup.h
index 210c14f818fb..f0e70b119fb0 100644
--- a/lib/arm/asm/setup.h
+++ b/lib/arm/asm/setup.h
@@ -13,9 +13,8 @@
 extern u64 cpus[NR_CPUS];	/* per-cpu IDs (MPIDRs) */
 extern int nr_cpus;
 
-#define MR_F_PRIMARY		(1U << 0)
-#define MR_F_IO			(1U << 1)
-#define MR_F_CODE		(1U << 2)
+#define MR_F_IO			(1U << 0)
+#define MR_F_CODE		(1U << 1)
 #define MR_F_UNKNOWN		(1U << 31)
 
 struct mem_region {
@@ -26,6 +25,7 @@ struct mem_region {
 extern struct mem_region *mem_regions;
 extern phys_addr_t __phys_offset, __phys_end;
 
+extern struct mem_region *mem_region_find(phys_addr_t paddr);
 extern unsigned int mem_region_get_flags(phys_addr_t paddr);
 
 #define PHYS_OFFSET		(__phys_offset)
@@ -35,6 +35,6 @@ extern unsigned int mem_region_get_flags(phys_addr_t paddr);
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 #define SMP_CACHE_BYTES		L1_CACHE_BYTES
 
-void setup(const void *fdt);
+void setup(const void *fdt, phys_addr_t freemem_start);
 
 #endif /* _ASMARM_SETUP_H_ */
diff --git a/lib/arm/mmu.c b/lib/arm/mmu.c
index 7d658a3fe89c..7628f797a543 100644
--- a/lib/arm/mmu.c
+++ b/lib/arm/mmu.c
@@ -175,12 +175,10 @@ void *setup_mmu(phys_addr_t phys_end)
 		if (r->flags & MR_F_IO) {
 			continue;
 		} else if (r->flags & MR_F_CODE) {
-			assert_msg(r->flags & MR_F_PRIMARY, "Unexpected code region");
 			/* armv8 requires code shared between EL1 and EL0 to be read-only */
 			mmu_set_range_ptes(mmu_idmap, r->start, r->start, r->end,
 					   __pgprot(PTE_WBWA | PTE_USER | PTE_RDONLY));
 		} else {
-			assert_msg(r->flags & MR_F_PRIMARY, "Unexpected data region");
 			mmu_set_range_ptes(mmu_idmap, r->start, r->start, r->end,
 					   __pgprot(PTE_WBWA | PTE_USER));
 		}
diff --git a/lib/arm/setup.c b/lib/arm/setup.c
index 7db308b70744..86f054304baf 100644
--- a/lib/arm/setup.c
+++ b/lib/arm/setup.c
@@ -28,9 +28,10 @@
 
 #include "io.h"
 
-#define NR_INITIAL_MEM_REGIONS 16
+#define MAX_DT_MEM_REGIONS	16
+#define NR_EXTRA_MEM_REGIONS	16
+#define NR_INITIAL_MEM_REGIONS	(MAX_DT_MEM_REGIONS + NR_EXTRA_MEM_REGIONS)
 
-extern unsigned long stacktop;
 extern unsigned long etext;
 
 struct timer_state __timer_state;
@@ -75,28 +76,68 @@ static void cpu_init(void)
 	set_cpu_online(0, true);
 }
 
-unsigned int mem_region_get_flags(phys_addr_t paddr)
+static void mem_region_add(struct mem_region *r)
+{
+	struct mem_region *r_next = mem_regions;
+	int i = 0;
+
+	for (; r_next->end; ++r_next, ++i)
+		;
+	assert(i < NR_INITIAL_MEM_REGIONS);
+
+	*r_next = *r;
+}
+
+static void mem_regions_add_dt_regions(void)
+{
+	struct dt_pbus_reg regs[MAX_DT_MEM_REGIONS];
+	int nr_regs, i;
+
+	nr_regs = dt_get_memory_params(regs, MAX_DT_MEM_REGIONS);
+	assert(nr_regs > 0);
+
+	for (i = 0; i < nr_regs; ++i) {
+		mem_region_add(&(struct mem_region){
+			.start = regs[i].addr,
+			.end = regs[i].addr + regs[i].size,
+		});
+	}
+}
+
+struct mem_region *mem_region_find(phys_addr_t paddr)
 {
 	struct mem_region *r;
 
-	for (r = mem_regions; r->end; ++r) {
+	for (r = mem_regions; r->end; ++r)
 		if (paddr >= r->start && paddr < r->end)
-			return r->flags;
-	}
+			return r;
+	return NULL;
+}
 
-	return MR_F_UNKNOWN;
+unsigned int mem_region_get_flags(phys_addr_t paddr)
+{
+	struct mem_region *r = mem_region_find(paddr);
+	return r ? r->flags : MR_F_UNKNOWN;
 }
 
-static void mem_init(phys_addr_t freemem_start)
+static void mem_regions_add_assumed(void)
 {
 	phys_addr_t code_end = (phys_addr_t)(unsigned long)&etext;
-	struct dt_pbus_reg regs[NR_INITIAL_MEM_REGIONS];
-	struct mem_region mem = {
-		.start = (phys_addr_t)-1,
+	struct mem_region *r;
+
+	r = mem_region_find(code_end - 1);
+	assert(r);
+
+	/* Split the region with the code into two regions; code and data */
+	mem_region_add(&(struct mem_region){
+		.start = code_end,
+		.end = r->end,
+	});
+	*r = (struct mem_region){
+		.start = r->start,
+		.end = code_end,
+		.flags = MR_F_CODE,
 	};
-	struct mem_region *primary = NULL;
-	phys_addr_t base, top;
-	int nr_regs, nr_io = 0, i;
 
 	/*
 	 * mach-virt I/O regions:
@@ -104,57 +145,47 @@ static void mem_init(phys_addr_t freemem_start)
 	 *   - 512M at 256G (arm64, arm uses highmem=off)
 	 *   - 512G at 512G (arm64, arm uses highmem=off)
 	 */
-	mem_regions[nr_io++] = (struct mem_region){ 0, (1ul << 30), MR_F_IO };
+	mem_region_add(&(struct mem_region){ 0, (1ul << 30), MR_F_IO });
 #ifdef __aarch64__
-	mem_regions[nr_io++] = (struct mem_region){ (1ul << 38), (1ul << 38) | (1ul << 29), MR_F_IO };
-	mem_regions[nr_io++] = (struct mem_region){ (1ul << 39), (1ul << 40), MR_F_IO };
+	mem_region_add(&(struct mem_region){ (1ul << 38), (1ul << 38) | (1ul << 29), MR_F_IO });
+	mem_region_add(&(struct mem_region){ (1ul << 39), (1ul << 40), MR_F_IO });
 #endif
+}
 
-	nr_regs = dt_get_memory_params(regs, NR_INITIAL_MEM_REGIONS - nr_io);
-	assert(nr_regs > 0);
-
-	for (i = 0; i < nr_regs; ++i) {
-		struct mem_region *r = &mem_regions[nr_io + i];
+static void mem_init(phys_addr_t freemem_start)
+{
+	phys_addr_t base, top;
+	struct mem_region *freemem, *r, mem = {
+		.start = (phys_addr_t)-1,
+	};
 
-		r->start = regs[i].addr;
-		r->end = regs[i].addr + regs[i].size;
+	freemem = mem_region_find(freemem_start);
+	assert(freemem && !(freemem->flags & (MR_F_IO | MR_F_CODE)));
 
-		/*
-		 * pick the region we're in for our primary region
-		 */
-		if (freemem_start >= r->start && freemem_start < r->end) {
-			r->flags |= MR_F_PRIMARY;
-			primary = r;
+	for (r = mem_regions; r->end; ++r) {
+		if (!(r->flags & MR_F_IO)) {
+			if (r->start < mem.start)
+				mem.start = r->start;
+			if (r->end > mem.end)
+				mem.end = r->end;
 		}
-
-		/*
-		 * set the lowest and highest addresses found,
-		 * ignoring potential gaps
-		 */
-		if (r->start < mem.start)
-			mem.start = r->start;
-		if (r->end > mem.end)
-			mem.end = r->end;
 	}
-	assert(primary);
-	assert(!(mem.start & ~PHYS_MASK) && !((mem.end - 1) & ~PHYS_MASK));
+	assert(mem.end && !(mem.start & ~PHYS_MASK));
+	mem.end &= PHYS_MASK;
 
-	__phys_offset = primary->start;	/* PHYS_OFFSET */
-	__phys_end = primary->end;	/* PHYS_END */
+	/* Check for holes */
+	r = mem_region_find(mem.start);
+	while (r && r->end != mem.end)
+		r = mem_region_find(r->end);
+	assert(r);
 
-	/* Split the primary region into two regions; code and data */
-	mem_regions[nr_io + i] = (struct mem_region){
-		.start = code_end,
-		.end = primary->end,
-		.flags = MR_F_PRIMARY,
-	};
-	*primary = (struct mem_region){
-		.start = primary->start,
-		.end = code_end,
-		.flags = MR_F_PRIMARY | MR_F_CODE,
-	};
+	/* Ensure our selected freemem range is somewhere in our full range */
+	assert(freemem_start >= mem.start && freemem->end <= mem.end);
 
-	phys_alloc_init(freemem_start, __phys_end - freemem_start);
+	__phys_offset = mem.start;	/* PHYS_OFFSET */
+	__phys_end = mem.end;		/* PHYS_END */
+
+	phys_alloc_init(freemem_start, freemem->end - freemem_start);
 	phys_alloc_set_minimum_alignment(SMP_CACHE_BYTES);
 
 	phys_alloc_get_unused(&base, &top);
@@ -204,35 +235,17 @@ static void timer_save_state(void)
 	__timer_state.vtimer.irq_flags = fdt32_to_cpu(data[8]);
 }
 
-void setup(const void *fdt)
+void setup(const void *fdt, phys_addr_t freemem_start)
 {
-	void *freemem = &stacktop;
+	void *freemem;
 	const char *bootargs, *tmp;
 	u32 fdt_size;
 	int ret;
 
-	/*
-	 * Before calling mem_init we need to move the fdt and initrd
-	 * to safe locations. We move them to construct the memory
-	 * map illustrated below:
-	 *
-	 *    +----------------------+   <-- top of physical memory
-	 *    |                      |
-	 *    ~                      ~
-	 *    |                      |
-	 *    +----------------------+   <-- top of initrd
-	 *    |                      |
-	 *    +----------------------+   <-- top of FDT
-	 *    |                      |
-	 *    +----------------------+   <-- top of cpu0's stack
-	 *    |                      |
-	 *    +----------------------+   <-- top of text/data/bss sections,
-	 *    |                      |       see arm/flat.lds
-	 *    |                      |
-	 *    +----------------------+   <-- load address
-	 *    |                      |
-	 *    +----------------------+
-	 */
+	assert(sizeof(long) == 8 || freemem_start < (3ul << 30));
+	freemem = (void *)(unsigned long)freemem_start;
+
+	/* Move the FDT to the base of free memory */
 	fdt_size = fdt_totalsize(fdt);
 	ret = fdt_move(fdt, freemem, fdt_size);
 	assert(ret == 0);
@@ -240,6 +253,7 @@ void setup(const void *fdt)
 	assert(ret == 0);
 	freemem += fdt_size;
 
+	/* Move the initrd to the top of the FDT */
 	ret = dt_get_initrd(&tmp, &initrd_size);
 	assert(ret == 0 || ret == -FDT_ERR_NOTFOUND);
 	if (ret == 0) {
@@ -248,7 +262,10 @@ void setup(const void *fdt)
 		freemem += initrd_size;
 	}
 
+	mem_regions_add_dt_regions();
+	mem_regions_add_assumed();
 	mem_init(PAGE_ALIGN((unsigned long)freemem));
+
 	cpu_init();
 
 	/* cpu_init must be called before thread_info_init */
-- 
2.30.2