From: Corentin Labbe <clabbe@baylibre.com> To: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net, robh+dt@kernel.org, soc@kernel.org, ulli.kroll@googlemail.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com> Subject: [PATCH 4/5] ARM: gemini: add device tree for edimax NS2502 Date: Mon, 17 May 2021 19:32:04 +0000 [thread overview] Message-ID: <20210517193205.691147-5-clabbe@baylibre.com> (raw) In-Reply-To: <20210517193205.691147-1-clabbe@baylibre.com> The edimax NS2502 is a NAS box running a SL3516 SoC. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/gemini-ns2502.dts | 141 ++++++++++++++++++++++++++++ 2 files changed, 142 insertions(+) create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1754b562e0b9..bb30d13c9c60 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -216,6 +216,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ + gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts new file mode 100644 index 000000000000..a23745dc20f4 --- /dev/null +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + * Device Tree file for Edimax NS 2502 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "Edimax NS-2502"; + compatible = "edimax,ns-2502", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; +}; + +&flash { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00700000>; + }; + partition@720000 { + label = "VCTL"; + reg = <0x00720000 0x00020000>; + read-only; + }; + partition@740000 { + label = "CurConf"; + reg = <0x00740000 0x000a0000>; + read-only; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- 2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe@baylibre.com> To: arnd@arndb.de, linus.walleij@linaro.org, olof@lixom.net, robh+dt@kernel.org, soc@kernel.org, ulli.kroll@googlemail.com Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com> Subject: [PATCH 4/5] ARM: gemini: add device tree for edimax NS2502 Date: Mon, 17 May 2021 19:32:04 +0000 [thread overview] Message-ID: <20210517193205.691147-5-clabbe@baylibre.com> (raw) Message-ID: <20210517193204.uGUga4972-CdAP1D4tO1s5FAXfYhRCc-fYj7I28GGIs@z> (raw) In-Reply-To: <20210517193205.691147-1-clabbe@baylibre.com> The edimax NS2502 is a NAS box running a SL3516 SoC. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/gemini-ns2502.dts | 141 ++++++++++++++++++++++++++++ 2 files changed, 142 insertions(+) create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1754b562e0b9..bb30d13c9c60 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -216,6 +216,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ + gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts new file mode 100644 index 000000000000..a23745dc20f4 --- /dev/null +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + * Device Tree file for Edimax NS 2502 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "Edimax NS-2502"; + compatible = "edimax,ns-2502", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; +}; + +&flash { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00700000>; + }; + partition@720000 { + label = "VCTL"; + reg = <0x00720000 0x00020000>; + read-only; + }; + partition@740000 { + label = "CurConf"; + reg = <0x00740000 0x000a0000>; + read-only; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + read-only; + }; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- 2.26.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-17 19:32 UTC|newest] Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-17 19:32 [PATCH 0/5] ARM: gemini: add two more board Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-17 19:32 ` [PATCH 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-17 19:32 ` [PATCH 2/5] dt-bindings: add vendor prefix for edimax Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-19 19:50 ` Rob Herring 2021-05-19 19:50 ` Rob Herring 2021-05-17 19:32 ` [PATCH 3/5] dt-bindings: add vendor prefix for ssi Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-19 19:50 ` Rob Herring 2021-05-19 19:50 ` Rob Herring 2021-05-17 19:32 ` Corentin Labbe [this message] 2021-05-17 19:32 ` [PATCH 4/5] ARM: gemini: add device tree for edimax NS2502 Corentin Labbe 2021-05-17 23:46 ` Linus Walleij 2021-05-17 23:46 ` Linus Walleij 2021-05-17 23:46 ` Linus Walleij 2021-05-18 9:54 ` LABBE Corentin 2021-05-18 9:54 ` LABBE Corentin 2021-05-18 9:54 ` LABBE Corentin 2021-05-18 23:17 ` Linus Walleij 2021-05-18 23:17 ` Linus Walleij 2021-05-18 23:17 ` Linus Walleij 2021-05-20 13:02 ` LABBE Corentin 2021-05-20 13:02 ` LABBE Corentin 2021-05-20 13:02 ` LABBE Corentin 2021-05-17 19:32 ` [PATCH 5/5] ARM: gemini: add device tree for ssi1328 Corentin Labbe 2021-05-17 19:32 ` Corentin Labbe 2021-05-17 23:47 ` Linus Walleij 2021-05-17 23:47 ` Linus Walleij 2021-05-17 23:47 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210517193205.691147-5-clabbe@baylibre.com \ --to=clabbe@baylibre.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ --cc=ulli.kroll@googlemail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.