[PATCH 5/5] ARM: gemini: add device tree for ssi1328

[Corentin Labbe <clabbe@baylibre.com>]

The SSI 1328 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/gemini-ssi1328.dts | 162 +++++++++++++++++++++++++++
 2 files changed, 163 insertions(+)
 create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bb30d13c9c60..0a9f6001b90b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -220,6 +220,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-rut1xx.dtb \
 	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
 	gemini-wbd111.dtb \
 	gemini-wbd222.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
new file mode 100644
index 000000000000..1112007c9d6f
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ssi1328.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x800000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+			/* We lack the knowledge of necessary GPIO to achieve
+			 * Gigabit
+			 */
+			max-speed = <100>;
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@20000 {
+			label = "Kernel";
+			reg = <0x00020000 0x00300000>;
+		};
+		partition@320000 {
+			label = "Ramdisk";
+			reg = <0x00320000 0x00600000>;
+		};
+		partition@920000 {
+			label = "Application";
+			reg = <0x00920000 0x00600000>;
+		};
+		partition@f20000 {
+			label = "VCTL";
+			reg = <0x00f20000 0x00020000>;
+			read-only;
+		};
+		partition@f40000 {
+			label = "CurConf";
+			reg = <0x00f40000 0x000a0000>;
+			read-only;
+		};
+		partition@fe0000 {
+			label = "FIS directory";
+			reg = <0x00fe0000 0x00200000>;
+			read-only;
+		};
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
2.26.3