From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org, David Jander <david@protonic.nl>,
devicetree@vger.kernel.org
Subject: [PATCH v4 5/5] Input: resistive-adc-touch: add support for z1 and z2 channels
Date: Wed, 19 May 2021 11:42:21 +0200 [thread overview]
Message-ID: <20210519094221.27792-6-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210519094221.27792-1-o.rempel@pengutronix.de>
This patch adds support for the z1 and z2 channels. These are used to
calculate the applied pressure. As there is no common order of the
individual channels of a resistive touch ADC, support for
io-channel-names is added (although the DT bindings stated the
driver already supports these).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../input/touchscreen/resistive-adc-touch.c | 142 ++++++++++++++++--
1 file changed, 128 insertions(+), 14 deletions(-)
diff --git a/drivers/input/touchscreen/resistive-adc-touch.c b/drivers/input/touchscreen/resistive-adc-touch.c
index e50af30183f4..fa90005b7bc9 100644
--- a/drivers/input/touchscreen/resistive-adc-touch.c
+++ b/drivers/input/touchscreen/resistive-adc-touch.c
@@ -20,7 +20,18 @@
#define DRIVER_NAME "resistive-adc-touch"
#define GRTS_DEFAULT_PRESSURE_MIN 50000
+#define GRTS_DEFAULT_PRESSURE_MAX 65535
#define GRTS_MAX_POS_MASK GENMASK(11, 0)
+#define GRTS_MAX_CHANNELS 4
+
+enum grts_ch_type {
+ GRTS_CH_NONE = 0,
+ GRTS_CH_X,
+ GRTS_CH_Y,
+ GRTS_CH_PRESSURE,
+ GRTS_CH_Z1,
+ GRTS_CH_Z2,
+};
/**
* struct grts_state - generic resistive touch screen information struct
@@ -33,24 +44,61 @@
*/
struct grts_state {
u32 pressure_min;
+ u32 x_plate_ohms;
bool pressure;
struct iio_channel *iio_chans;
struct iio_cb_buffer *iio_cb;
struct input_dev *input;
struct touchscreen_properties prop;
+ u8 ch[GRTS_MAX_CHANNELS];
};
static int grts_cb(const void *data, void *private)
{
const u16 *touch_info = data;
struct grts_state *st = private;
- unsigned int x, y, press = 0x0;
+ unsigned int x, y, press = 0, z1 = 0, z2;
+ unsigned int Rt, i;
+
+ for (i = 0; i < ARRAY_SIZE(st->ch) && st->ch[i] != GRTS_CH_NONE; i++) {
+ switch (st->ch[i]) {
+ case GRTS_CH_X:
+ x = touch_info[i];
+ break;
+ case GRTS_CH_Y:
+ y = touch_info[i];
+ break;
+ case GRTS_CH_PRESSURE:
+ press = touch_info[i];
+ break;
+ case GRTS_CH_Z1:
+ z1 = touch_info[i];
+ break;
+ case GRTS_CH_Z2:
+ z2 = touch_info[i];
+ break;
+ case GRTS_CH_NONE:
+ break;
+ }
+ }
- /* channel data coming in buffer in the order below */
- x = touch_info[0];
- y = touch_info[1];
- if (st->pressure)
- press = touch_info[2];
+ if (z1) {
+ Rt = z2;
+ Rt -= z1;
+ Rt *= st->x_plate_ohms;
+ Rt = DIV_ROUND_CLOSEST(Rt, 16);
+ Rt *= x;
+ Rt /= z1;
+ Rt = DIV_ROUND_CLOSEST(Rt, 256);
+ /*
+ * On increased pressure the resistance (Rt) is decreasing
+ * so, convert values to make it looks as real pressure.
+ */
+ if (Rt < GRTS_DEFAULT_PRESSURE_MAX)
+ press = GRTS_DEFAULT_PRESSURE_MAX - Rt;
+ else
+ press = 0;
+ }
if ((!x && !y) || (st->pressure && (press < st->pressure_min))) {
/* report end of touch */
@@ -94,12 +142,77 @@ static void grts_disable(void *data)
iio_channel_release_all_cb(data);
}
+static int grts_get_properties(struct grts_state *st, struct device *dev)
+{
+ int idx, error;
+
+ idx = device_property_match_string(dev, "io-channel-names", "x");
+ if (idx < 0)
+ return idx;
+
+ if (idx >= ARRAY_SIZE(st->ch))
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_X;
+
+ idx = device_property_match_string(dev, "io-channel-names", "y");
+ if (idx < 0)
+ return idx;
+
+ if (idx >= ARRAY_SIZE(st->ch))
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_Y;
+
+ /* pressure is optional */
+ idx = device_property_match_string(dev, "io-channel-names", "pressure");
+ if (idx >= 0) {
+ if (idx >= ARRAY_SIZE(st->ch))
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_PRESSURE;
+ st->pressure = true;
+
+ return 0;
+ }
+
+ /* if no pressure is defined, try optional z1 + z2 */
+ idx = device_property_match_string(dev, "io-channel-names", "z1");
+ if (idx < 0)
+ return 0;
+
+ if (idx >= ARRAY_SIZE(st->ch))
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_Z1;
+
+ /* if z1 is provided z2 is not optional */
+ idx = device_property_match_string(dev, "io-channel-names", "z2");
+ if (idx < 0)
+ return idx;
+
+ if (idx >= ARRAY_SIZE(st->ch))
+ return -EOVERFLOW;
+
+ st->ch[idx] = GRTS_CH_Z2;
+ st->pressure = true;
+
+ error = device_property_read_u32(dev,
+ "touchscreen-x-plate-ohms",
+ &st->x_plate_ohms);
+ if (error) {
+ dev_err(dev, "can't get touchscreen-x-plate-ohms property\n");
+ return error;
+ }
+
+ return 0;
+}
+
static int grts_probe(struct platform_device *pdev)
{
struct grts_state *st;
struct input_dev *input;
struct device *dev = &pdev->dev;
- struct iio_channel *chan;
int error;
st = devm_kzalloc(dev, sizeof(struct grts_state), GFP_KERNEL);
@@ -115,12 +228,13 @@ static int grts_probe(struct platform_device *pdev)
return error;
}
- chan = &st->iio_chans[0];
- st->pressure = false;
- while (chan && chan->indio_dev) {
- if (!strcmp(chan->channel->datasheet_name, "pressure"))
- st->pressure = true;
- chan++;
+ if (!device_property_present(dev, "io-channel-names"))
+ return -ENODEV;
+
+ error = grts_get_properties(st, dev);
+ if (error) {
+ dev_err(dev, "Failed to parse properties\n");
+ return error;
}
if (st->pressure) {
@@ -148,7 +262,7 @@ static int grts_probe(struct platform_device *pdev)
input_set_abs_params(input, ABS_Y, 0, GRTS_MAX_POS_MASK - 1, 0, 0);
if (st->pressure)
input_set_abs_params(input, ABS_PRESSURE, st->pressure_min,
- 0xffff, 0, 0);
+ GRTS_DEFAULT_PRESSURE_MAX, 0, 0);
input_set_capability(input, EV_KEY, BTN_TOUCH);
--
2.29.2
prev parent reply other threads:[~2021-05-19 9:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 9:42 [PATCH v4 0/5] add z1 and z2 channels support for resistive-adc-touch driver Oleksij Rempel
2021-05-19 9:42 ` [PATCH v4 1/5] dt-bindings: touchscreen: validate nodename Oleksij Rempel
2021-05-19 15:29 ` Rob Herring
2021-05-19 9:42 ` [PATCH v4 2/5] dt-bindings: touchscreen: Convert resistive-adc-touch binding to json schema Oleksij Rempel
2021-05-21 1:35 ` Rob Herring
2021-05-19 9:42 ` [PATCH v4 3/5] dt-bindings: touchscreen: add touchscreen-x/y-plate-ohms property Oleksij Rempel
2021-05-21 1:35 ` Rob Herring
2021-05-19 9:42 ` [PATCH v4 4/5] dt-bindings: touchscreen: resistive-adc-touch: add support for z1 and z2 channels Oleksij Rempel
2021-05-21 1:36 ` Rob Herring
2021-05-19 9:42 ` Oleksij Rempel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210519094221.27792-6-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=Jonathan.Cameron@Huawei.com \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.