All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dario Binacchi <dariobin@libero.it>
To: linux-kernel@vger.kernel.org
Cc: "Lee Jones" <lee.jones@linaro.org>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Rob Herring" <robh@kernel.org>,
	"Tero Kristo" <kristo@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Dario Binacchi" <dariobin@libero.it>,
	"Tony Lindgren" <tony@atomide.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-omap@vger.kernel.org
Subject: [PATCH v6 4/5] ARM: dts: am43xx-clocks: add spread spectrum support
Date: Thu, 20 May 2021 21:13:04 +0200	[thread overview]
Message-ID: <20210520191306.21711-5-dariobin@libero.it> (raw)
In-Reply-To: <20210520191306.21711-1-dariobin@libero.it>

Registers for adjusting the spread spectrum clocking (SSC) have been
added. As reported by the TI spruhl7x RM, SSC is supported only for LCD
and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and
PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field
in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE,
MPU, DDR, PER, DISP, EXTDEV).

Signed-off-by: Dario Binacchi <dariobin@libero.it>
---

(no changes since v1)

 arch/arm/boot/dts/am43xx-clocks.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c726cd8dbdf1..314fc5975acb 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -204,7 +204,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
 	};
 
 	dpll_core_x2_ck: dpll_core_x2_ck {
@@ -250,7 +250,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
 	};
 
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
@@ -276,7 +276,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
 	};
 
 	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
@@ -294,7 +294,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
 	};
 
 	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
@@ -313,7 +313,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-j-type-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
 	};
 
 	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
@@ -557,7 +557,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
 	};
 
 	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
-- 
2.17.1


  parent reply	other threads:[~2021-05-20 19:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-20 19:13 [PATCH v6 0/5] clk: ti: add am33xx spread spectrum clock support Dario Binacchi
2021-05-20 19:13 ` [PATCH v6 1/5] clk: ti: fix typo in routine description Dario Binacchi
2021-05-20 19:13 ` [PATCH v6 2/5] dt-bindings: ti: dpll: add spread spectrum support Dario Binacchi
2021-05-20 19:13 ` [PATCH v6 3/5] ARM: dts: am33xx-clocks: " Dario Binacchi
2021-05-20 19:13 ` Dario Binacchi [this message]
2021-05-21  9:26   ` [PATCH v6 4/5] ARM: dts: am43xx-clocks: " Tony Lindgren
2021-05-20 19:13 ` [PATCH v6 5/5] clk: ti: add am33xx/am43xx spread spectrum clock support Dario Binacchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210520191306.21711-5-dariobin@libero.it \
    --to=dariobin@libero.it \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.