All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@techsingularity.net>
To: Linux-MM <linux-mm@kvack.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>,
	Matthew Wilcox <willy@infradead.org>,
	Vlastimil Babka <vbabka@suse.cz>,
	Michal Hocko <mhocko@kernel.org>,
	Nicholas Piggin <npiggin@gmail.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 6/6] mm/page_alloc: Introduce vm.percpu_pagelist_high_fraction
Date: Fri, 21 May 2021 11:28:26 +0100	[thread overview]
Message-ID: <20210521102826.28552-7-mgorman@techsingularity.net> (raw)
In-Reply-To: <20210521102826.28552-1-mgorman@techsingularity.net>

This introduces a new sysctl vm.percpu_pagelist_high_fraction. It is
similar to the old vm.percpu_pagelist_fraction except it only adjusts
pcp->high to potentially reduce zone->lock contention while preserving
allocation latency when PCP lists have to be refilled.

  # grep -E "high:|batch" /proc/zoneinfo | tail -2
              high:  649
              batch: 63

  # sysctl vm.percpu_pagelist_high_fraction=8
  # grep -E "high:|batch" /proc/zoneinfo | tail -2
              high:  35071
              batch: 63

  # sysctl vm.percpu_pagelist_high_fraction=64
              high:  4383
              batch: 63

  # sysctl vm.percpu_pagelist_high_fraction=0
              high:  649
              batch: 63

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
---
 Documentation/admin-guide/sysctl/vm.rst | 20 +++++++++
 include/linux/mmzone.h                  |  3 ++
 kernel/sysctl.c                         |  8 ++++
 mm/page_alloc.c                         | 56 +++++++++++++++++++++++--
 4 files changed, 83 insertions(+), 4 deletions(-)

diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
index 2fcafccb53a8..415f2aebf59b 100644
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -64,6 +64,7 @@ files can be found in mm/swap.c.
 - overcommit_ratio
 - page-cluster
 - panic_on_oom
+- percpu_pagelist_high_fraction
 - stat_interval
 - stat_refresh
 - numa_stat
@@ -789,6 +790,25 @@ panic_on_oom=2+kdump gives you very strong tool to investigate
 why oom happens. You can get snapshot.
 
 
+percpu_pagelist_high_fraction
+=============================
+
+This is the fraction of pages at most (high mark pcp->high) in each zone that
+are allocated for each per cpu page list.  The min value for this is 8.  It
+means that we do not allow more than 1/8th of pages in each zone to be
+allocated in any single per_cpu_pagelist.  This entry only changes the value
+of hot per cpu pagelists.  User can specify a number like 100 to allocate
+1/100th of each zone to each per cpu page list.
+
+The batch value of each per cpu pagelist remains the same regardless of the
+value of the high fraction so allocation latencies are unaffected.
+
+The initial value is zero. Kernel uses this value to set the high pcp->high
+mark based on the low watermark for the zone and the number of local
+online CPUs.  If the user writes '0' to this sysctl, it will revert to
+this default behavior.
+
+
 stat_interval
 =============
 
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index a0606239a167..e20d98c62beb 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1040,12 +1040,15 @@ int watermark_scale_factor_sysctl_handler(struct ctl_table *, int, void *,
 extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES];
 int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, void *,
 		size_t *, loff_t *);
+int percpu_pagelist_high_fraction_sysctl_handler(struct ctl_table *, int,
+		void *, size_t *, loff_t *);
 int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int,
 		void *, size_t *, loff_t *);
 int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int,
 		void *, size_t *, loff_t *);
 int numa_zonelist_order_handler(struct ctl_table *, int,
 		void *, size_t *, loff_t *);
+extern int percpu_pagelist_high_fraction;
 extern char numa_zonelist_order[];
 #define NUMA_ZONELIST_ORDER_LEN	16
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4e5ac50a1af0..9eb9d1f987d9 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2889,6 +2889,14 @@ static struct ctl_table vm_table[] = {
 		.extra1		= SYSCTL_ONE,
 		.extra2		= &one_thousand,
 	},
+	{
+		.procname	= "percpu_pagelist_high_fraction",
+		.data		= &percpu_pagelist_high_fraction,
+		.maxlen		= sizeof(percpu_pagelist_high_fraction),
+		.mode		= 0644,
+		.proc_handler	= percpu_pagelist_high_fraction_sysctl_handler,
+		.extra1		= SYSCTL_ZERO,
+	},
 	{
 		.procname	= "page_lock_unfairness",
 		.data		= &sysctl_page_lock_unfairness,
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d8f8044781c4..08f9e5027ed4 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -120,6 +120,7 @@ typedef int __bitwise fpi_t;
 
 /* prevent >1 _updater_ of zone percpu pageset ->high and ->batch fields */
 static DEFINE_MUTEX(pcp_batch_high_lock);
+#define MIN_PERCPU_PAGELIST_HIGH_FRACTION (8)
 
 struct pagesets {
 	local_lock_t lock;
@@ -181,6 +182,7 @@ EXPORT_SYMBOL(_totalram_pages);
 unsigned long totalreserve_pages __read_mostly;
 unsigned long totalcma_pages __read_mostly;
 
+int percpu_pagelist_high_fraction;
 gfp_t gfp_allowed_mask __read_mostly = GFP_BOOT_MASK;
 DEFINE_STATIC_KEY_MAYBE(CONFIG_INIT_ON_ALLOC_DEFAULT_ON, init_on_alloc);
 EXPORT_SYMBOL(init_on_alloc);
@@ -6670,7 +6672,8 @@ static int zone_batchsize(struct zone *zone)
 #endif
 }
 
-static int zone_highsize(struct zone *zone, int cpu_online)
+static int
+zone_highsize(struct zone *zone, unsigned long total_pages, int cpu_online)
 {
 #ifdef CONFIG_MMU
 	int high;
@@ -6683,7 +6686,7 @@ static int zone_highsize(struct zone *zone, int cpu_online)
 	 * not be online yet.
 	 */
 	nr_local_cpus = max(1U, cpumask_weight(cpumask_of_node(zone_to_nid(zone)))) + cpu_online;
-	high = low_wmark_pages(zone) / nr_local_cpus;
+	high = total_pages / nr_local_cpus;
 
 	return high;
 #else
@@ -6749,14 +6752,21 @@ static void __zone_set_pageset_high_and_batch(struct zone *zone, unsigned long h
 
 /*
  * Calculate and set new high and batch values for all per-cpu pagesets of a
- * zone based on the zone's size.
+ * zone based on the zone's size and the percpu_pagelist_high_fraction sysctl.
  */
 static void zone_set_pageset_high_and_batch(struct zone *zone, int cpu_online)
 {
 	int new_high, new_batch;
 
+	if (!percpu_pagelist_high_fraction) {
+		new_high = zone_highsize(zone, low_wmark_pages(zone), cpu_online);
+	} else {
+		new_high = zone_highsize(zone,
+			zone_managed_pages(zone) / percpu_pagelist_high_fraction,
+			cpu_online);
+	}
+
 	new_batch = max(1, zone_batchsize(zone));
-	new_high = zone_highsize(zone, cpu_online);
 
 	if (zone->pageset_high == new_high &&
 	    zone->pageset_batch == new_batch)
@@ -8443,6 +8453,44 @@ int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *table, int write,
 	return 0;
 }
 
+/*
+ * percpu_pagelist_high_fraction - changes the pcp->high for each zone on each
+ * cpu. It is the fraction of total pages in each zone that a hot per cpu
+ * pagelist can have before it gets flushed back to buddy allocator.
+ */
+int percpu_pagelist_high_fraction_sysctl_handler(struct ctl_table *table,
+		int write, void *buffer, size_t *length, loff_t *ppos)
+{
+	struct zone *zone;
+	int old_percpu_pagelist_high_fraction;
+	int ret;
+
+	mutex_lock(&pcp_batch_high_lock);
+	old_percpu_pagelist_high_fraction = percpu_pagelist_high_fraction;
+
+	ret = proc_dointvec_minmax(table, write, buffer, length, ppos);
+	if (!write || ret < 0)
+		goto out;
+
+	/* Sanity checking to avoid pcp imbalance */
+	if (percpu_pagelist_high_fraction &&
+	    percpu_pagelist_high_fraction < MIN_PERCPU_PAGELIST_HIGH_FRACTION) {
+		percpu_pagelist_high_fraction = old_percpu_pagelist_high_fraction;
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* No change? */
+	if (percpu_pagelist_high_fraction == old_percpu_pagelist_high_fraction)
+		goto out;
+
+	for_each_populated_zone(zone)
+		zone_set_pageset_high_and_batch(zone, 0);
+out:
+	mutex_unlock(&pcp_batch_high_lock);
+	return ret;
+}
+
 #ifndef __HAVE_ARCH_RESERVED_KERNEL_PAGES
 /*
  * Returns the number of pages that arch has reserved but
-- 
2.26.2


  parent reply	other threads:[~2021-05-21 10:31 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 10:28 [RFC PATCH 0/6] Calculate pcp->high based on zone sizes and active CPUs Mel Gorman
2021-05-21 10:28 ` [PATCH 1/6] mm/page_alloc: Delete vm.percpu_pagelist_fraction Mel Gorman
2021-05-21 21:04   ` Dave Hansen
2021-05-21 10:28 ` [PATCH 2/6] mm/page_alloc: Disassociate the pcp->high from pcp->batch Mel Gorman
2021-05-21 21:52   ` Dave Hansen
2021-05-24  8:32     ` Mel Gorman
2021-05-21 10:28 ` [PATCH 3/6] mm/page_alloc: Adjust pcp->high after CPU hotplug events Mel Gorman
2021-05-21 22:13   ` Dave Hansen
2021-05-24  9:07     ` Mel Gorman
2021-05-24 15:52       ` Dave Hansen
2021-05-24 16:01         ` Mel Gorman
2021-05-21 10:28 ` [PATCH 4/6] mm/page_alloc: Scale the number of pages that are batch freed Mel Gorman
2021-05-21 22:36   ` Dave Hansen
2021-05-24  9:12     ` Mel Gorman
2021-05-21 10:28 ` [PATCH 5/6] mm/page_alloc: Limit the number of pages on PCP lists when reclaim is active Mel Gorman
2021-05-21 22:44   ` Dave Hansen
2021-05-24  9:22     ` Mel Gorman
2021-05-21 10:28 ` Mel Gorman [this message]
2021-05-21 22:57   ` [PATCH 6/6] mm/page_alloc: Introduce vm.percpu_pagelist_high_fraction Dave Hansen
2021-05-24  9:25     ` Mel Gorman
2021-05-22  2:19   ` Hillf Danton
2021-05-25  8:01 [PATCH 0/6 v2] Calculate pcp->high based on zone sizes and active CPUs Mel Gorman
2021-05-25  8:01 ` [PATCH 6/6] mm/page_alloc: Introduce vm.percpu_pagelist_high_fraction Mel Gorman
2021-05-28 11:59   ` Vlastimil Babka
2021-05-28 12:53     ` Mel Gorman
2021-05-28 14:38       ` Vlastimil Babka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521102826.28552-7-mgorman@techsingularity.net \
    --to=mgorman@techsingularity.net \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=npiggin@gmail.com \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.