All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ilya Leoshkevich <iii@linux.ibm.com>
To: Richard Henderson <richard.henderson@linaro.org>,
	David Hildenbrand <david@redhat.com>,
	Laurent Vivier <laurent@vivier.eu>,
	Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
	qemu-s390x@nongnu.org, qemu-devel@nongnu.org,
	Ilya Leoshkevich <iii@linux.ibm.com>,
	Andreas Krebbel <krebbel@linux.ibm.com>
Subject: [PATCH v2 1/2] target/s390x: Fix SIGILL psw.addr reporting
Date: Fri, 21 May 2021 13:19:07 +0200	[thread overview]
Message-ID: <20210521111908.2843735-2-iii@linux.ibm.com> (raw)
In-Reply-To: <20210521111908.2843735-1-iii@linux.ibm.com>

When a s390x CPU attempts to execute an illegal instruction, an
operation exception is recognized. This is a suppressing exception,
which means that the PSW is advanced by the length of the illegal
instruction.

On the real hardware or in qemu-system-s390x the kernel then raises
SIGILL with si_addr pointing to the suppressed instruction and
psw.addr containing the updated PSW.

Unfortunately qemu-s390x sets both to the address of the suppressed
instruction at the moment. Fix by sharing the PSW advancement logic
with qemu-system-s390x and setting si_addr to the address of the
instruction that raised the exception.

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/319
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
---
 linux-user/s390x/cpu_loop.c |  6 +++-
 target/s390x/excp_helper.c  | 69 ++++++++++++++++++++-----------------
 target/s390x/internal.h     |  1 +
 3 files changed, 43 insertions(+), 33 deletions(-)

diff --git a/linux-user/s390x/cpu_loop.c b/linux-user/s390x/cpu_loop.c
index f2d1215fb1..6f5462d4f8 100644
--- a/linux-user/s390x/cpu_loop.c
+++ b/linux-user/s390x/cpu_loop.c
@@ -21,6 +21,7 @@
 #include "qemu-common.h"
 #include "qemu.h"
 #include "cpu_loop-common.h"
+#include "internal.h"
 
 /* s390x masks the fault address it reports in si_addr for SIGSEGV and SIGBUS */
 #define S390X_FAIL_ADDR_MASK -4096LL
@@ -29,6 +30,7 @@ void cpu_loop(CPUS390XState *env)
 {
     CPUState *cs = env_cpu(env);
     int trapnr, n, sig;
+    target_ulong excp_psw_addr;
     target_siginfo_t info;
     target_ulong addr;
     abi_long ret;
@@ -38,6 +40,7 @@ void cpu_loop(CPUS390XState *env)
         trapnr = cpu_exec(cs);
         cpu_exec_end(cs);
         process_queued_cpu_work(cs);
+        excp_psw_addr = env->psw.addr;
 
         switch (trapnr) {
         case EXCP_INTERRUPT:
@@ -66,6 +69,7 @@ void cpu_loop(CPUS390XState *env)
             n = TARGET_TRAP_BRKPT;
             goto do_signal_pc;
         case EXCP_PGM:
+            s390_cpu_program_interrupt_advance_psw(env);
             n = env->int_pgm_code;
             switch (n) {
             case PGM_OPERATION:
@@ -131,7 +135,7 @@ void cpu_loop(CPUS390XState *env)
             break;
 
         do_signal_pc:
-            addr = env->psw.addr;
+            addr = excp_psw_addr;
         do_signal:
             info.si_signo = sig;
             info.si_errno = 0;
diff --git a/target/s390x/excp_helper.c b/target/s390x/excp_helper.c
index 20625c2c8f..0a323967ae 100644
--- a/target/s390x/excp_helper.c
+++ b/target/s390x/excp_helper.c
@@ -82,6 +82,42 @@ void HELPER(data_exception)(CPUS390XState *env, uint32_t dxc)
     tcg_s390_data_exception(env, dxc, GETPC());
 }
 
+void s390_cpu_program_interrupt_advance_psw(CPUS390XState *env)
+{
+    switch (env->int_pgm_code) {
+    case PGM_PER:
+        if (env->per_perc_atmid & PER_CODE_EVENT_NULLIFICATION) {
+            break;
+        }
+        /* FALL THROUGH */
+    case PGM_OPERATION:
+    case PGM_PRIVILEGED:
+    case PGM_EXECUTE:
+    case PGM_PROTECTION:
+    case PGM_ADDRESSING:
+    case PGM_SPECIFICATION:
+    case PGM_DATA:
+    case PGM_FIXPT_OVERFLOW:
+    case PGM_FIXPT_DIVIDE:
+    case PGM_DEC_OVERFLOW:
+    case PGM_DEC_DIVIDE:
+    case PGM_HFP_EXP_OVERFLOW:
+    case PGM_HFP_EXP_UNDERFLOW:
+    case PGM_HFP_SIGNIFICANCE:
+    case PGM_HFP_DIVIDE:
+    case PGM_TRANS_SPEC:
+    case PGM_SPECIAL_OP:
+    case PGM_OPERAND:
+    case PGM_HFP_SQRT:
+    case PGM_PC_TRANS_SPEC:
+    case PGM_ALET_SPEC:
+    case PGM_MONITOR:
+        /* advance the PSW if our exception is not nullifying */
+        env->psw.addr += env->int_pgm_ilen;
+        break;
+    }
+}
+
 #if defined(CONFIG_USER_ONLY)
 
 void s390_cpu_do_interrupt(CPUState *cs)
@@ -202,38 +238,7 @@ static void do_program_interrupt(CPUS390XState *env)
 
     assert(ilen == 2 || ilen == 4 || ilen == 6);
 
-    switch (env->int_pgm_code) {
-    case PGM_PER:
-        if (env->per_perc_atmid & PER_CODE_EVENT_NULLIFICATION) {
-            break;
-        }
-        /* FALL THROUGH */
-    case PGM_OPERATION:
-    case PGM_PRIVILEGED:
-    case PGM_EXECUTE:
-    case PGM_PROTECTION:
-    case PGM_ADDRESSING:
-    case PGM_SPECIFICATION:
-    case PGM_DATA:
-    case PGM_FIXPT_OVERFLOW:
-    case PGM_FIXPT_DIVIDE:
-    case PGM_DEC_OVERFLOW:
-    case PGM_DEC_DIVIDE:
-    case PGM_HFP_EXP_OVERFLOW:
-    case PGM_HFP_EXP_UNDERFLOW:
-    case PGM_HFP_SIGNIFICANCE:
-    case PGM_HFP_DIVIDE:
-    case PGM_TRANS_SPEC:
-    case PGM_SPECIAL_OP:
-    case PGM_OPERAND:
-    case PGM_HFP_SQRT:
-    case PGM_PC_TRANS_SPEC:
-    case PGM_ALET_SPEC:
-    case PGM_MONITOR:
-        /* advance the PSW if our exception is not nullifying */
-        env->psw.addr += ilen;
-        break;
-    }
+    s390_cpu_program_interrupt_advance_psw(env);
 
     qemu_log_mask(CPU_LOG_INT,
                   "%s: code=0x%x ilen=%d psw: %" PRIx64 " %" PRIx64 "\n",
diff --git a/target/s390x/internal.h b/target/s390x/internal.h
index 11515bb617..9f1665ccbf 100644
--- a/target/s390x/internal.h
+++ b/target/s390x/internal.h
@@ -272,6 +272,7 @@ bool s390_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
 void s390x_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
                                    MMUAccessType access_type,
                                    int mmu_idx, uintptr_t retaddr);
+void s390_cpu_program_interrupt_advance_psw(CPUS390XState *cpu);
 
 
 /* fpu_helper.c */
-- 
2.31.1



  reply	other threads:[~2021-05-21 11:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 11:19 [PATCH v2 0/2] target/s390x: Fix SIGILL psw.addr reporting Ilya Leoshkevich
2021-05-21 11:19 ` Ilya Leoshkevich [this message]
2021-05-21 11:19 ` [PATCH v2 2/2] tests/tcg/s390x: Test SIGILL handling Ilya Leoshkevich
2021-05-21 11:22   ` David Hildenbrand
2021-05-21 11:30 ` [PATCH v2 0/2] target/s390x: Fix SIGILL psw.addr reporting no-reply
2021-06-01 12:38 ` Ilya Leoshkevich
2021-06-01 15:52   ` Ilya Leoshkevich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521111908.2843735-2-iii@linux.ibm.com \
    --to=iii@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=krebbel@linux.ibm.com \
    --cc=laurent@vivier.eu \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.