All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	Jonathan Marek <jonathan@marek.ca>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [RFC PATCH 12/13] drm/msm/dsi: Add support for DSC configuration
Date: Fri, 21 May 2021 18:19:45 +0530	[thread overview]
Message-ID: <20210521124946.3617862-17-vkoul@kernel.org> (raw)
In-Reply-To: <20210521124946.3617862-1-vkoul@kernel.org>

When DSC is enabled, we need to configure DSI registers accordingly and
configure the respective stream compression registers.

Add support to calculate the register setting based on DSC params and
timing information and configure these registers.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
 drivers/gpu/drm/msm/dsi/dsi_host.c | 118 ++++++++++++++++++++++++++---
 2 files changed, 118 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 50eb4d1b8fdd..b8e9e608abfc 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -2310,4 +2310,14 @@ static inline uint32_t REG_DSI_7nm_PHY_LN_TX_DCTRL(uint32_t i0) { return 0x00000
 
 #define REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE			0x00000260
 
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
+
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac
+
 #endif /* DSI_XML */
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 864d3c655e73..e26545fc82e0 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -954,6 +954,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	u32 va_end = va_start + mode->vdisplay;
 	u32 hdisplay = mode->hdisplay;
 	u32 wc;
+	u32 data;
 
 	DBG("");
 
@@ -972,7 +973,69 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 		hdisplay /= 2;
 	}
 
+	if (msm_host->dsc) {
+		struct msm_display_dsc_config *dsc = msm_host->dsc;
+
+		/* update dsc params with timing params */
+		dsc->drm.pic_width = mode->hdisplay;
+		dsc->drm.pic_height = mode->vdisplay;
+
+		/* Divide the display by 3 but keep back/font porch and
+		 * pulse width same
+		 */
+		h_total -= hdisplay;
+		hdisplay /= 3;
+		h_total += hdisplay;
+		ha_end = ha_start + hdisplay;
+	}
+
 	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, intf_width, slice_per_intf, width;
+			u32 total_bytes_per_intf;
+
+			/* first calculate dsc parameters and then program
+			 * compress mode registers
+			 */
+			intf_width = hdisplay;
+			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm.slice_width);
+
+			/* If slice_per_pkt > slice_per_intf, then use 1
+			 * This can happen during partial update
+			 */
+			if (dsc->slice_per_pkt > slice_per_intf)
+				dsc->slice_per_pkt = 1;
+
+			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm.slice_width * 8, 8);
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
+			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->slice_per_pkt;
+			dsc->pkt_per_line = slice_per_intf / dsc->slice_per_pkt;
+
+			width = dsc->pclk_per_line;
+			reg = dsc->bytes_per_pkt << 16;
+			reg |= (0x0b << 8);    /* dtype of compressed image */
+
+			/* pkt_per_line:
+			 * 0 == 1 pkt
+			 * 1 == 2 pkt
+			 * 2 == 4 pkt
+			 * 3 pkt is not supported
+			 * above translates to ffs() - 1
+			 */
+			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			dsi_write(msm_host,
+				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
+		}
+
 		dsi_write(msm_host, REG_DSI_ACTIVE_H,
 			DSI_ACTIVE_H_START(ha_start) |
 			DSI_ACTIVE_H_END(ha_end));
@@ -991,19 +1054,50 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
 			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
 	} else {		/* command mode */
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, reg_ctrl, reg_ctrl2;
+			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
+
+			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
+			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
+
+			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm.slice_width);
+			bytes_in_slice = DIV_ROUND_UP(dsc->drm.slice_width *
+						      dsc->drm.bits_per_pixel, 8);
+			dsc->drm.slice_chunk_size = bytes_in_slice;
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+			dsc->pkt_per_line = slice_per_intf / dsc->slice_per_pkt;
+
+			reg = 0x39 << 8;
+			reg |= ffs(dsc->pkt_per_line) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			reg_ctrl |= reg;
+			reg_ctrl2 |= bytes_in_slice;
+
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
+		}
+
 		/* image data and 1 byte write_memory_start cmd */
-		wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		if (!msm_host->dsc)
+			wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		else
+			wc = mode->hdisplay / 2 + 1;
+
+		data = DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
+		       DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(msm_host->channel) |
+			DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(MIPI_DSI_DCS_LONG_WRITE);
 
-		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
-			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
-			DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(
-					msm_host->channel) |
-			DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(
-					MIPI_DSI_DCS_LONG_WRITE));
+		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL, data);
 
-		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL,
-			DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
-			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay));
+		data = DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
+			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay);
+		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL, data);
 	}
 }
 
@@ -2111,6 +2205,7 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct platform_device *pdev = msm_host->pdev;
+	struct msm_drm_private *priv;
 	int ret;
 
 	msm_host->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
@@ -2130,6 +2225,9 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	}
 
 	msm_host->dev = dev;
+	priv = dev->dev_private;
+	priv->dsc = msm_host->dsc;
+
 	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
 	if (ret) {
 		pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
-- 
2.26.3


WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Rob Clark <robdclark@gmail.com>
Cc: Jonathan Marek <jonathan@marek.ca>,
	David Airlie <airlied@linux.ie>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vinod Koul <vkoul@kernel.org>,
	dri-devel@lists.freedesktop.org,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	freedreno@lists.freedesktop.org
Subject: [RFC PATCH 12/13] drm/msm/dsi: Add support for DSC configuration
Date: Fri, 21 May 2021 18:19:45 +0530	[thread overview]
Message-ID: <20210521124946.3617862-17-vkoul@kernel.org> (raw)
In-Reply-To: <20210521124946.3617862-1-vkoul@kernel.org>

When DSC is enabled, we need to configure DSI registers accordingly and
configure the respective stream compression registers.

Add support to calculate the register setting based on DSC params and
timing information and configure these registers.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
 drivers/gpu/drm/msm/dsi/dsi_host.c | 118 ++++++++++++++++++++++++++---
 2 files changed, 118 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 50eb4d1b8fdd..b8e9e608abfc 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -2310,4 +2310,14 @@ static inline uint32_t REG_DSI_7nm_PHY_LN_TX_DCTRL(uint32_t i0) { return 0x00000
 
 #define REG_DSI_7nm_PHY_PLL_PERF_OPTIMIZE			0x00000260
 
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
+
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac
+
 #endif /* DSI_XML */
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 864d3c655e73..e26545fc82e0 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -954,6 +954,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	u32 va_end = va_start + mode->vdisplay;
 	u32 hdisplay = mode->hdisplay;
 	u32 wc;
+	u32 data;
 
 	DBG("");
 
@@ -972,7 +973,69 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 		hdisplay /= 2;
 	}
 
+	if (msm_host->dsc) {
+		struct msm_display_dsc_config *dsc = msm_host->dsc;
+
+		/* update dsc params with timing params */
+		dsc->drm.pic_width = mode->hdisplay;
+		dsc->drm.pic_height = mode->vdisplay;
+
+		/* Divide the display by 3 but keep back/font porch and
+		 * pulse width same
+		 */
+		h_total -= hdisplay;
+		hdisplay /= 3;
+		h_total += hdisplay;
+		ha_end = ha_start + hdisplay;
+	}
+
 	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, intf_width, slice_per_intf, width;
+			u32 total_bytes_per_intf;
+
+			/* first calculate dsc parameters and then program
+			 * compress mode registers
+			 */
+			intf_width = hdisplay;
+			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm.slice_width);
+
+			/* If slice_per_pkt > slice_per_intf, then use 1
+			 * This can happen during partial update
+			 */
+			if (dsc->slice_per_pkt > slice_per_intf)
+				dsc->slice_per_pkt = 1;
+
+			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm.slice_width * 8, 8);
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
+			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->slice_per_pkt;
+			dsc->pkt_per_line = slice_per_intf / dsc->slice_per_pkt;
+
+			width = dsc->pclk_per_line;
+			reg = dsc->bytes_per_pkt << 16;
+			reg |= (0x0b << 8);    /* dtype of compressed image */
+
+			/* pkt_per_line:
+			 * 0 == 1 pkt
+			 * 1 == 2 pkt
+			 * 2 == 4 pkt
+			 * 3 pkt is not supported
+			 * above translates to ffs() - 1
+			 */
+			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			dsi_write(msm_host,
+				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
+		}
+
 		dsi_write(msm_host, REG_DSI_ACTIVE_H,
 			DSI_ACTIVE_H_START(ha_start) |
 			DSI_ACTIVE_H_END(ha_end));
@@ -991,19 +1054,50 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
 			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
 	} else {		/* command mode */
+		if (msm_host->dsc) {
+			struct msm_display_dsc_config *dsc = msm_host->dsc;
+			u32 reg, reg_ctrl, reg_ctrl2;
+			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
+
+			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
+			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
+
+			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm.slice_width);
+			bytes_in_slice = DIV_ROUND_UP(dsc->drm.slice_width *
+						      dsc->drm.bits_per_pixel, 8);
+			dsc->drm.slice_chunk_size = bytes_in_slice;
+			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+			dsc->pkt_per_line = slice_per_intf / dsc->slice_per_pkt;
+
+			reg = 0x39 << 8;
+			reg |= ffs(dsc->pkt_per_line) << 6;
+
+			dsc->eol_byte_num = total_bytes_per_intf % 3;
+			reg |= dsc->eol_byte_num << 4;
+			reg |= 1;
+
+			reg_ctrl |= reg;
+			reg_ctrl2 |= bytes_in_slice;
+
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
+			dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
+		}
+
 		/* image data and 1 byte write_memory_start cmd */
-		wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		if (!msm_host->dsc)
+			wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+		else
+			wc = mode->hdisplay / 2 + 1;
+
+		data = DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
+		       DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(msm_host->channel) |
+			DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(MIPI_DSI_DCS_LONG_WRITE);
 
-		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
-			DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
-			DSI_CMD_MDP_STREAM0_CTRL_VIRTUAL_CHANNEL(
-					msm_host->channel) |
-			DSI_CMD_MDP_STREAM0_CTRL_DATA_TYPE(
-					MIPI_DSI_DCS_LONG_WRITE));
+		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL, data);
 
-		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL,
-			DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
-			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay));
+		data = DSI_CMD_MDP_STREAM0_TOTAL_H_TOTAL(hdisplay) |
+			DSI_CMD_MDP_STREAM0_TOTAL_V_TOTAL(mode->vdisplay);
+		dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_TOTAL, data);
 	}
 }
 
@@ -2111,6 +2205,7 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
 	struct platform_device *pdev = msm_host->pdev;
+	struct msm_drm_private *priv;
 	int ret;
 
 	msm_host->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
@@ -2130,6 +2225,9 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
 	}
 
 	msm_host->dev = dev;
+	priv = dev->dev_private;
+	priv->dsc = msm_host->dsc;
+
 	ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K);
 	if (ret) {
 		pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);
-- 
2.26.3


  parent reply	other threads:[~2021-05-21 12:51 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 12:49 [RFC PATCH 00/13] drm/msm: Add Display Stream Compression Support Vinod Koul
2021-05-21 12:49 ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 01/13] drm/dsc: Add dsc pps header init function Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 15:29   ` Daniel Vetter
2021-05-21 15:29     ` Daniel Vetter
2021-05-24  7:26     ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 02/13] dt-bindings: msm/dsi: Document Display Stream Compression (DSC) parameters Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 13:18   ` Rob Herring
2021-05-21 13:18     ` Rob Herring
2021-05-21 13:23     ` Vinod Koul
2021-05-21 13:23       ` Vinod Koul
2021-05-21 14:42   ` Bjorn Andersson
2021-05-21 14:42     ` Bjorn Andersson
2021-05-24  7:30     ` Vinod Koul
2021-05-24  7:30       ` Vinod Koul
2021-05-24 15:08       ` Bjorn Andersson
2021-05-24 15:08         ` Bjorn Andersson
2021-05-26  5:32         ` Vinod Koul
2021-05-26  5:32           ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 03/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-27 23:49   ` Dmitry Baryshkov
2021-05-27 23:49     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 03/13] drm/msm/dsi: add support for dsc data Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-27 23:45   ` Dmitry Baryshkov
2021-05-27 23:45     ` Dmitry Baryshkov
2021-06-02 11:06     ` Vinod Koul
2021-06-02 11:06       ` Vinod Koul
2021-05-28 10:29   ` Dmitry Baryshkov
2021-05-28 10:29     ` Dmitry Baryshkov
2021-06-02 11:17     ` Vinod Koul
2021-06-02 11:17       ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 04/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 04/13] drm/msm/disp/dpu1: Add support for DSC Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:31   ` Dmitry Baryshkov
2021-05-28 10:31     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 05/13] drm/msm/disp/dpu1: Add support for DSC in pingpong block Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 05/13] drm/msm/dsi: add support for dsc data Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 06/13] drm/msm/disp/dpu1: Add DSC support in RM Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:33   ` Dmitry Baryshkov
2021-05-28 10:33     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 07/13] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 08/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 09/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:36   ` Dmitry Baryshkov
2021-05-28 10:36     ` Dmitry Baryshkov
2021-05-21 12:49 ` [RFC PATCH 09/13] drm/msm/disp/dpu1: Dont " Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 10/13] drm/msm/disp/dpu1: Add support for DSC in encoder Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 11/13] drm/msm/disp/dpu1: Add support for DSC in topology Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-28 10:39   ` Dmitry Baryshkov
2021-05-28 10:39     ` Dmitry Baryshkov
2021-05-28 22:23     ` abhinavk
2021-05-28 22:23       ` abhinavk
2021-05-28 22:29       ` Dmitry Baryshkov
2021-05-28 22:29         ` Dmitry Baryshkov
2021-05-21 12:49 ` Vinod Koul [this message]
2021-05-21 12:49   ` [RFC PATCH 12/13] drm/msm/dsi: Add support for DSC configuration Vinod Koul
2021-05-21 12:49 ` [RFC PATCH 13/13] drm/msm/dsi: Pass DSC params to drm_panel Vinod Koul
2021-05-21 12:49   ` Vinod Koul
2021-05-21 14:09 ` [Freedreno] [RFC PATCH 00/13] drm/msm: Add Display Stream Compression Support Jeffrey Hugo
2021-05-21 14:09   ` Jeffrey Hugo
2021-05-26  5:46   ` Vinod Koul
2021-05-26  5:46     ` Vinod Koul
2021-05-26 15:00     ` Jeffrey Hugo
2021-05-26 15:00       ` Jeffrey Hugo
2021-05-27 23:30       ` Rob Clark
2021-05-27 23:30         ` Rob Clark
2021-06-02 11:01         ` Vinod Koul
2021-06-02 11:01           ` Vinod Koul
2021-06-03 23:40           ` abhinavk
2021-06-03 23:40             ` abhinavk
2021-06-17  8:06             ` Vinod Koul
2021-06-17  8:06               ` Vinod Koul
2021-06-04  2:36           ` Rob Clark
2021-06-04  2:36             ` Rob Clark
2021-06-02 10:56       ` Vinod Koul
2021-06-02 10:56         ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210521124946.3617862-17-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.