[PATCH 7/8] iio: accel: bmc150: Add support for DUAL250E ACPI DSM for setting the hinge angle

[Hans de Goede <hdegoede@redhat.com>]

Some 360 degree hinges (yoga) style 2-in-1 devices use 2 bmc150 accels
to allow the OS to determine the angle between the display and the base
of the device, so that the OS can determine if the 2-in-1 is in laptop
or in tablet-mode.

On Windows both accelerometers are read (polled) by a special service
and this service calls the DSM (Device Specific Method), which in turn
translates the angles to one of laptop/tablet/tent/stand mode and then
notifies the EC about the new mode and the EC then enables or disables
the builtin keyboard and touchpad based in the mode.

When the 2-in-1 is powered-on or resumed folded in tablet mode the
EC senses this independent of the DSM by using a HALL effect sensor
which senses that the keyboard has been folded away behind the display.

At power-on or resume the EC disables the keyboard based on this and
the only way to get the keyboard to work after this is to call the
DSM to re-enable it.

Call the DSM on probe() and resume() to fix the keyboard not working
when powered-on / resumed in tablet-mode.

This patch was developed and tested on a Lenovo Yoga 300-IBR.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/iio/accel/bmc150-accel-core.c |   3 +
 drivers/iio/accel/bmc150-accel-i2c.c  | 109 ++++++++++++++++++++++++++
 drivers/iio/accel/bmc150-accel.h      |   3 +
 3 files changed, 115 insertions(+)

diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 0291512648b2..932007895f18 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1803,6 +1803,9 @@ static int bmc150_accel_resume(struct device *dev)
 	bmc150_accel_fifo_set_mode(data);
 	mutex_unlock(&data->mutex);
 
+	if (data->resume_callback)
+		data->resume_callback(dev);
+
 	return 0;
 }
 #endif
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
index 1dd7b8a9a382..31256c32a33c 100644
--- a/drivers/iio/accel/bmc150-accel-i2c.c
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -28,6 +28,107 @@ static const struct acpi_device_id bmc150_acpi_dual_accel_ids[] = {
 	{ },
 };
 
+/*
+ * The DUAL250E ACPI device for 360° hinges type 2-in-1s with 1 accelerometer
+ * in the display and 1 in the hinge has an ACPI-method (DSM) to tell the
+ * ACPI code about the angle between the 2 halves. This will make the ACPI
+ * code enable/disable the keyboard and touchpad. We need to call this to avoid
+ * the keyboard being disabled when the 2-in-1 is turned-on or resumed while
+ * fully folded into tablet mode (which gets detected with a HALL-sensor).
+ * If we don't call this then the keyboard won't work even when the 2-in-1 is
+ * changed to be used in laptop mode after the power-on / resume.
+ *
+ * This DSM takes 2 angles, selected by setting aux0 to 0 or 1, these presumably
+ * define the angle between the gravity vector measured by the accelerometer in
+ * the display (aux0=0) resp. the base (aux0=1) and some reference vector.
+ * The 2 angles get subtracted from each other so the reference vector does
+ * not matter and we can simply leave the second angle at 0.
+ */
+
+#define BMC150_DSM_GUID				"7681541e-8827-4239-8d9d-36be7fe12542"
+#define DUAL250E_SET_ANGLE_FN_INDEX		3
+
+struct dual250e_set_angle_args {
+	u32 aux0;
+	u32 ang0;
+	u32 rawx;
+	u32 rawy;
+	u32 rawz;
+} __packed;
+
+static bool bmc150_acpi_set_angle_dsm(struct i2c_client *client, u32 aux0, u32 ang0)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+	struct dual250e_set_angle_args args = {
+		.aux0 = aux0,
+		.ang0 = ang0,
+	};
+	union acpi_object args_obj, *obj;
+	guid_t guid;
+
+	if (strcmp(acpi_device_hid(adev), "DUAL250E"))
+		return false;
+
+	guid_parse(BMC150_DSM_GUID, &guid);
+
+	if (!acpi_check_dsm(adev->handle, &guid, 0, BIT(DUAL250E_SET_ANGLE_FN_INDEX)))
+		return false;
+
+	/*
+	 * Note this triggers the following warning:
+	 * "ACPI Warning: \_SB.PCI0.I2C2.ACC1._DSM: Argument #4 type mismatch -
+	 *                Found [Buffer], ACPI requires [Package]"
+	 * This is unavoidable since the _DSM implementation expects a "naked"
+	 * buffer, so wrapping it in a package will _not_ work.
+	 */
+	args_obj.type = ACPI_TYPE_BUFFER;
+	args_obj.buffer.length = sizeof(args);
+	args_obj.buffer.pointer = (u8 *)&args;
+
+	obj = acpi_evaluate_dsm(adev->handle, &guid, 0, DUAL250E_SET_ANGLE_FN_INDEX, &args_obj);
+	if (!obj) {
+		dev_err(&client->dev, "Failed to call DSM to enable keyboard and touchpad\n");
+		return false;
+	}
+
+	ACPI_FREE(obj);
+	return true;
+}
+
+static bool bmc150_acpi_enable_keyboard(struct i2c_client *client)
+{
+	/*
+	 * The EC must see a change for it to re-enable the kbd, so first set the
+	 * angle to 270° (tent/stand mode) and then change it to 90° (laptop mode).
+	 */
+	if (!bmc150_acpi_set_angle_dsm(client, 0, 270))
+		return false;
+
+	/* The EC needs some time to notice the angle being changed */
+	msleep(100);
+
+	return bmc150_acpi_set_angle_dsm(client, 0, 90);
+}
+
+static void bmc150_acpi_resume_work(struct work_struct *work)
+{
+	struct bmc150_accel_data *data =
+		container_of(work, struct bmc150_accel_data, resume_work.work);
+
+	bmc150_acpi_enable_keyboard(data->second_device);
+}
+
+static void bmc150_acpi_resume_handler(struct device *dev)
+{
+	struct bmc150_accel_data *data = iio_priv(dev_get_drvdata(dev));
+
+	/*
+	 * Delay the bmc150_acpi_enable_keyboard() call till after the system
+	 * resume has completed, otherwise it will not work.
+	 */
+	schedule_delayed_work(&data->resume_work, msecs_to_jiffies(1000));
+}
+
 /*
  * Some acpi_devices describe 2 accelerometers in a single ACPI device, try instantiating
  * a second i2c_client for an I2cSerialBusV2 ACPI resource with index 1.
@@ -55,12 +156,20 @@ static void bmc150_acpi_dual_accel_probe(struct i2c_client *client)
 	board_info.irq = acpi_dev_gpio_irq_get_by(adev, NULL, 1);
 
 	data->second_device = i2c_acpi_new_device(&client->dev, 1, &board_info);
+
+	if (!IS_ERR(data->second_device) && bmc150_acpi_enable_keyboard(data->second_device)) {
+		INIT_DELAYED_WORK(&data->resume_work, bmc150_acpi_resume_work);
+		data->resume_callback = bmc150_acpi_resume_handler;
+	}
 }
 
 static void bmc150_acpi_dual_accel_remove(struct i2c_client *client)
 {
 	struct bmc150_accel_data *data = iio_priv(i2c_get_clientdata(client));
 
+	if (data->resume_callback)
+		cancel_delayed_work_sync(&data->resume_work);
+
 	i2c_unregister_device(data->second_device);
 }
 #else
diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
index 5da6fd32bac5..d67d6ed6ae77 100644
--- a/drivers/iio/accel/bmc150-accel.h
+++ b/drivers/iio/accel/bmc150-accel.h
@@ -6,6 +6,7 @@
 #include <linux/iio/iio.h>
 #include <linux/mutex.h>
 #include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
 
 struct regmap;
 struct i2c_client;
@@ -62,6 +63,8 @@ struct bmc150_accel_data {
 	int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
 	const struct bmc150_accel_chip_info *chip_info;
 	struct i2c_client *second_device;
+	void (*resume_callback)(struct device *dev);
+	struct delayed_work resume_work;
 	struct iio_mount_matrix orientation;
 };
 
-- 
2.31.1