From: Tushar Sugandhi <tusharsu@linux.microsoft.com>
To: dm-devel@redhat.com
Cc: tusharsu@linux.microsoft.com, nramas@linux.microsoft.com,
zohar@linux.ibm.com, snitzer@redhat.com, agk@redhat.com
Subject: [dm-devel] [RFC 0/7] device mapper target measurements using IMA
Date: Tue, 25 May 2021 17:59:47 -0700 [thread overview]
Message-ID: <20210526005954.31564-1-tusharsu@linux.microsoft.com> (raw)
Hello all,
I have been working on measuring various device mapper target attributes
using IMA kernel subsystem.
(more context in the patch series cover-letter below)
I still have to work on:
- filling the gaps in the documentation,
- testing some corner cases etc.
But I would like to get an early feedback from the device-mapper
community on the code and therefore sharing the series as an RFC for
the time being.
Thanks,
Tushar
----------------
--Cover Letter--
----------------
For a given system, various external services/infrastructure tools
(including the attestation service) interact with it - both during the
setup and during rest of the system run-time. They share sensitive data
and/or execute critical workload on that system. The external services
may want to verify the current run-time state of the relevant kernel
subsystems before fully trusting the system with business-critical
data/workload.
Device mapper is one such kernel subsystem that plays a critical role on
a given system by providing various important functionalities to the
block devices using various target types like crypt, verity, integrity
etc. Each of these target types’ functionalities can be configured with
various attributes. The attributes chosen to configure these target types
can significantly impact the security profile of the block device,
and in-turn, of the system itself. For instance, the type of encryption
algorithm and the key size determines the strength of encryption for a
given block device.
Therefore, verifying the current state of various block devices as well
as their various target attributes is crucial for external services
before fully trusting the system with business-critical data/workload.
IMA provides the necessary functionality for device mapper to measure the
state and configuration of various block devices -
- BY device mapper itself, from within the kernel,
- in a tamper resistant way,
- and re-measured - triggered on state/configuration change.
This patch series uses this IMA functionality, by calling the function
ima_measure_critical_data(), when a block device state is changed (e.g.
on device create, resume, rename, remove etc.) It measures the device
state and configuration and stores it in IMA logs, so that it can be
used by external services for managing the system.
Tushar Sugandhi (7):
dm: measure data on table load
dm: measure data on device resume
dm: measure data on device remove
dm: measure data on table clear
dm: measure data on device rename
dm: update target specific status functions to measure data
dm: add documentation for IMA measurement support
.../admin-guide/device-mapper/dm-ima.rst | 271 +++++++++++
.../admin-guide/device-mapper/index.rst | 1 +
drivers/md/Makefile | 2 +
drivers/md/dm-cache-target.c | 30 ++
drivers/md/dm-clone-target.c | 7 +
drivers/md/dm-core.h | 5 +
drivers/md/dm-crypt.c | 50 ++
drivers/md/dm-delay.c | 4 +
drivers/md/dm-dust.c | 4 +
drivers/md/dm-ebs-target.c | 3 +
drivers/md/dm-era-target.c | 4 +
drivers/md/dm-flakey.c | 4 +
drivers/md/dm-ima.c | 442 ++++++++++++++++++
drivers/md/dm-ima.h | 41 ++
drivers/md/dm-integrity.c | 38 ++
drivers/md/dm-ioctl.c | 23 +-
drivers/md/dm-linear.c | 8 +
drivers/md/dm-log-userspace-base.c | 3 +
drivers/md/dm-log-writes.c | 4 +
drivers/md/dm-log.c | 10 +
drivers/md/dm-mpath.c | 29 ++
drivers/md/dm-ps-historical-service-time.c | 3 +
drivers/md/dm-ps-io-affinity.c | 3 +
drivers/md/dm-ps-queue-length.c | 3 +
drivers/md/dm-ps-round-robin.c | 4 +
drivers/md/dm-ps-service-time.c | 3 +
drivers/md/dm-raid.c | 42 ++
drivers/md/dm-raid1.c | 18 +
drivers/md/dm-snap-persistent.c | 4 +
drivers/md/dm-snap-transient.c | 4 +
drivers/md/dm-snap.c | 16 +
drivers/md/dm-stripe.c | 15 +
drivers/md/dm-switch.c | 4 +
drivers/md/dm-thin.c | 8 +
drivers/md/dm-unstripe.c | 4 +
drivers/md/dm-verity-target.c | 46 ++
drivers/md/dm-writecache.c | 3 +
drivers/md/dm-zoned-target.c | 3 +
include/linux/device-mapper.h | 6 +-
include/uapi/linux/dm-ioctl.h | 6 +
40 files changed, 1175 insertions(+), 3 deletions(-)
create mode 100644 Documentation/admin-guide/device-mapper/dm-ima.rst
create mode 100644 drivers/md/dm-ima.c
create mode 100644 drivers/md/dm-ima.h
--
2.17.1
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
next reply other threads:[~2021-05-26 1:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-26 0:59 Tushar Sugandhi [this message]
2021-05-26 0:59 ` [dm-devel] [RFC 1/7] dm: measure data on table load Tushar Sugandhi
2021-05-26 0:59 ` [dm-devel] [RFC 2/7] dm: measure data on device resume Tushar Sugandhi
2021-05-26 0:59 ` [dm-devel] [RFC 3/7] dm: measure data on device remove Tushar Sugandhi
2021-05-26 0:59 ` [dm-devel] [RFC 4/7] dm: measure data on table clear Tushar Sugandhi
2021-05-26 0:59 ` [dm-devel] [RFC 5/7] dm: measure data on device rename Tushar Sugandhi
2021-05-26 0:59 ` [dm-devel] [RFC 6/7] dm: update target specific status functions to measure data Tushar Sugandhi
2021-05-26 0:59 ` [dm-devel] [RFC 7/7] dm: add documentation for IMA measurement support Tushar Sugandhi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210526005954.31564-1-tusharsu@linux.microsoft.com \
--to=tusharsu@linux.microsoft.com \
--cc=agk@redhat.com \
--cc=dm-devel@redhat.com \
--cc=nramas@linux.microsoft.com \
--cc=snitzer@redhat.com \
--cc=zohar@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.