All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Robin Gong <yibin.gong@nxp.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap
Date: Wed, 26 May 2021 20:24:08 +0800	[thread overview]
Message-ID: <20210526122408.78156-1-axel.lin@ingics.com> (raw)

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/pca9450-regulator.c | 51 +++++++++++++--------------
 1 file changed, 24 insertions(+), 27 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 2f7ee212cb8c..64e5f5f0cc84 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -65,32 +65,9 @@ static const struct regmap_config pca9450_regmap_config = {
  * 10: 25mV/4usec
  * 11: 25mV/8usec
  */
-static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev,
-				      int ramp_delay)
-{
-	int id = rdev_get_id(rdev);
-	unsigned int ramp_value;
-
-	switch (ramp_delay) {
-	case 1 ... 3125:
-		ramp_value = BUCK1_RAMP_3P125MV;
-		break;
-	case 3126 ... 6250:
-		ramp_value = BUCK1_RAMP_6P25MV;
-		break;
-	case 6251 ... 12500:
-		ramp_value = BUCK1_RAMP_12P5MV;
-		break;
-	case 12501 ... 25000:
-		ramp_value = BUCK1_RAMP_25MV;
-		break;
-	default:
-		ramp_value = BUCK1_RAMP_25MV;
-	}
-
-	return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3,
-				  BUCK1_RAMP_MASK, ramp_value << 6);
-}
+static const unsigned int pca9450_dvs_buck_ramp_table[] = {
+	25000, 12500, 6250, 3125
+};
 
 static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
 	.enable = regulator_enable_regmap,
@@ -100,7 +77,7 @@ static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-	.set_ramp_delay = pca9450_dvs_set_ramp_delay,
+	.set_ramp_delay	= regulator_set_ramp_delay_regmap,
 };
 
 static const struct regulator_ops pca9450_buck_regulator_ops = {
@@ -251,6 +228,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK1OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK1CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK1CTRL,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -276,6 +257,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK2OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK2CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK2CTRL,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -301,6 +286,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK3OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK3CTRL,
 			.enable_mask = BUCK3_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK3CTRL,
+			.ramp_mask = BUCK3_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -477,6 +466,10 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.vsel_mask = BUCK1OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK1CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK1CTRL,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -502,6 +495,10 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.vsel_mask = BUCK2OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK2CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK2CTRL,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
-- 
2.25.1


             reply	other threads:[~2021-05-26 12:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26 12:24 Axel Lin [this message]
2021-06-01 17:37 ` [PATCH] regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210526122408.78156-1-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yibin.gong@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.