All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vincent Knecht <vincent.knecht@mailoo.org>
To: Mark Brown <broonie@kernel.org>
Cc: phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Vincent Knecht <vincent.knecht@mailoo.org>,
	Stephan Gerhold <stephan@gerhold.net>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/4] ASoC: codecs: tfa989x: Add support for tfa9897
Date: Fri, 28 May 2021 12:50:59 +0200	[thread overview]
Message-ID: <20210528105101.508254-2-vincent.knecht@mailoo.org> (raw)
In-Reply-To: <20210528105101.508254-1-vincent.knecht@mailoo.org>

Add specific init function to poke needed registers & values for this IC

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 sound/soc/codecs/tfa989x.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/codecs/tfa989x.c b/sound/soc/codecs/tfa989x.c
index 408e26eee108..6d94865c534b 100644
--- a/sound/soc/codecs/tfa989x.c
+++ b/sound/soc/codecs/tfa989x.c
@@ -44,6 +44,7 @@
 #define TFA989X_CURRENTSENSE4		0x49
 
 #define TFA9895_REVISION		0x12
+#define TFA9897_REVISION		0x97
 
 struct tfa989x_rev {
 	unsigned int rev;
@@ -175,6 +176,29 @@ static const struct tfa989x_rev tfa9895_rev = {
 	.init	= tfa9895_init,
 };
 
+static int tfa9897_init(struct regmap *regmap)
+{
+	int ret;
+
+	/* Reduce slewrate by clearing iddqtestbst to avoid booster damage */
+	ret = regmap_write(regmap, TFA989X_CURRENTSENSE3, 0x0300);
+	if (ret)
+		return ret;
+
+	/* Enable clipping */
+	ret = regmap_clear_bits(regmap, TFA989X_CURRENTSENSE4, 0x1);
+	if (ret)
+		return ret;
+
+	/* Set required TDM configuration */
+	return regmap_write(regmap, 0x14, 0x0);
+}
+
+static const struct tfa989x_rev tfa9897_rev = {
+	.rev	= TFA9897_REVISION,
+	.init	= tfa9897_init,
+};
+
 /*
  * Note: At the moment this driver bypasses the "CoolFlux DSP" built into the
  * TFA989X amplifiers. Unfortunately, there seems to be absolutely
@@ -280,6 +304,7 @@ static int tfa989x_i2c_probe(struct i2c_client *i2c)
 
 static const struct of_device_id tfa989x_of_match[] = {
 	{ .compatible = "nxp,tfa9895", .data = &tfa9895_rev },
+	{ .compatible = "nxp,tfa9897", .data = &tfa9897_rev },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tfa989x_of_match);
-- 
2.31.1




WARNING: multiple messages have this Message-ID (diff)
From: Vincent Knecht <vincent.knecht@mailoo.org>
To: Mark Brown <broonie@kernel.org>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	Stephan Gerhold <stephan@gerhold.net>,
	linux-kernel@vger.kernel.org, Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Vincent Knecht <vincent.knecht@mailoo.org>
Subject: [PATCH v1 2/4] ASoC: codecs: tfa989x: Add support for tfa9897
Date: Fri, 28 May 2021 12:50:59 +0200	[thread overview]
Message-ID: <20210528105101.508254-2-vincent.knecht@mailoo.org> (raw)
In-Reply-To: <20210528105101.508254-1-vincent.knecht@mailoo.org>

Add specific init function to poke needed registers & values for this IC

Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
 sound/soc/codecs/tfa989x.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/codecs/tfa989x.c b/sound/soc/codecs/tfa989x.c
index 408e26eee108..6d94865c534b 100644
--- a/sound/soc/codecs/tfa989x.c
+++ b/sound/soc/codecs/tfa989x.c
@@ -44,6 +44,7 @@
 #define TFA989X_CURRENTSENSE4		0x49
 
 #define TFA9895_REVISION		0x12
+#define TFA9897_REVISION		0x97
 
 struct tfa989x_rev {
 	unsigned int rev;
@@ -175,6 +176,29 @@ static const struct tfa989x_rev tfa9895_rev = {
 	.init	= tfa9895_init,
 };
 
+static int tfa9897_init(struct regmap *regmap)
+{
+	int ret;
+
+	/* Reduce slewrate by clearing iddqtestbst to avoid booster damage */
+	ret = regmap_write(regmap, TFA989X_CURRENTSENSE3, 0x0300);
+	if (ret)
+		return ret;
+
+	/* Enable clipping */
+	ret = regmap_clear_bits(regmap, TFA989X_CURRENTSENSE4, 0x1);
+	if (ret)
+		return ret;
+
+	/* Set required TDM configuration */
+	return regmap_write(regmap, 0x14, 0x0);
+}
+
+static const struct tfa989x_rev tfa9897_rev = {
+	.rev	= TFA9897_REVISION,
+	.init	= tfa9897_init,
+};
+
 /*
  * Note: At the moment this driver bypasses the "CoolFlux DSP" built into the
  * TFA989X amplifiers. Unfortunately, there seems to be absolutely
@@ -280,6 +304,7 @@ static int tfa989x_i2c_probe(struct i2c_client *i2c)
 
 static const struct of_device_id tfa989x_of_match[] = {
 	{ .compatible = "nxp,tfa9895", .data = &tfa9895_rev },
+	{ .compatible = "nxp,tfa9897", .data = &tfa9897_rev },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tfa989x_of_match);
-- 
2.31.1




  reply	other threads:[~2021-05-28 10:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-28 10:50 [PATCH v1 1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support Vincent Knecht
2021-05-28 10:50 ` Vincent Knecht
2021-05-28 10:50 ` Vincent Knecht [this message]
2021-05-28 10:50   ` [PATCH v1 2/4] ASoC: codecs: tfa989x: Add support for tfa9897 Vincent Knecht
2021-05-28 11:53   ` Stephan Gerhold
2021-05-28 11:53     ` Stephan Gerhold
2021-05-28 10:51 ` [PATCH v1 3/4] ASoC: dt-bindings: nxp,tfa989x: Add vddd-supply property Vincent Knecht
2021-05-28 10:51   ` [PATCH v1 3/4] ASoC: dt-bindings: nxp, tfa989x: " Vincent Knecht
2021-05-28 10:51 ` [PATCH v1 4/4] ASoC: codecs: tfa989x: Add support for optional vddd-supply Vincent Knecht
2021-05-28 10:51   ` Vincent Knecht
2021-05-28 11:54   ` Stephan Gerhold
2021-05-28 11:54     ` Stephan Gerhold
2021-05-28 11:40 ` [PATCH v1 1/4] ASoC: dt-bindings: nxp,tfa989x: Add tfa9897 support Stephan Gerhold
2021-05-28 11:40   ` Stephan Gerhold
2021-06-02 16:16 ` Mark Brown
2021-06-02 16:16   ` [PATCH v1 1/4] ASoC: dt-bindings: nxp, tfa989x: " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210528105101.508254-2-vincent.knecht@mailoo.org \
    --to=vincent.knecht@mailoo.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=stephan@gerhold.net \
    --cc=tiwai@suse.com \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.