All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Abel Vesa <abel.vesa@nxp.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de, patchwork-lst@pengutronix.de
Subject: [PATCH] clk: imx8mq: remove SYS PLL 1/2 clock gates
Date: Fri, 28 May 2021 20:01:35 +0200	[thread overview]
Message-ID: <20210528180135.1640876-1-l.stach@pengutronix.de> (raw)

Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks
the uSDHC module which is sporadically unable to enumerate devices after
this change. Also it makes AMP clock management harder with no obvious
benefit to Linux, so just revert the change.

Fixes: b04383b6a558 ("clk: imx8mq: Define gates for pll1/2 fixed dividers")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
Previously this was a more targeted change only reverting the problematic
bit for uSDHC, but Jacky Bai expressed the desire to just revert the whole
change, as it makes things harder for AMP use-cases.
---
 drivers/clk/imx/clk-imx8mq.c             | 56 ++++++++----------------
 include/dt-bindings/clock/imx8mq-clock.h | 19 --------
 2 files changed, 18 insertions(+), 57 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index b08019e1faf9..c491bc9c61ce 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -358,46 +358,26 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_hw_sscg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
 
 	/* SYS PLL1 fixed output */
-	hws[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_hw_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
-	hws[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_hw_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
-	hws[IMX8MQ_SYS1_PLL_100M_CG] = imx_clk_hw_gate("sys1_pll_100m_cg", "sys1_pll_out", base + 0x30, 13);
-	hws[IMX8MQ_SYS1_PLL_133M_CG] = imx_clk_hw_gate("sys1_pll_133m_cg", "sys1_pll_out", base + 0x30, 15);
-	hws[IMX8MQ_SYS1_PLL_160M_CG] = imx_clk_hw_gate("sys1_pll_160m_cg", "sys1_pll_out", base + 0x30, 17);
-	hws[IMX8MQ_SYS1_PLL_200M_CG] = imx_clk_hw_gate("sys1_pll_200m_cg", "sys1_pll_out", base + 0x30, 19);
-	hws[IMX8MQ_SYS1_PLL_266M_CG] = imx_clk_hw_gate("sys1_pll_266m_cg", "sys1_pll_out", base + 0x30, 21);
-	hws[IMX8MQ_SYS1_PLL_400M_CG] = imx_clk_hw_gate("sys1_pll_400m_cg", "sys1_pll_out", base + 0x30, 23);
-	hws[IMX8MQ_SYS1_PLL_800M_CG] = imx_clk_hw_gate("sys1_pll_800m_cg", "sys1_pll_out", base + 0x30, 25);
-
-	hws[IMX8MQ_SYS1_PLL_40M] = imx_clk_hw_fixed_factor("sys1_pll_40m", "sys1_pll_40m_cg", 1, 20);
-	hws[IMX8MQ_SYS1_PLL_80M] = imx_clk_hw_fixed_factor("sys1_pll_80m", "sys1_pll_80m_cg", 1, 10);
-	hws[IMX8MQ_SYS1_PLL_100M] = imx_clk_hw_fixed_factor("sys1_pll_100m", "sys1_pll_100m_cg", 1, 8);
-	hws[IMX8MQ_SYS1_PLL_133M] = imx_clk_hw_fixed_factor("sys1_pll_133m", "sys1_pll_133m_cg", 1, 6);
-	hws[IMX8MQ_SYS1_PLL_160M] = imx_clk_hw_fixed_factor("sys1_pll_160m", "sys1_pll_160m_cg", 1, 5);
-	hws[IMX8MQ_SYS1_PLL_200M] = imx_clk_hw_fixed_factor("sys1_pll_200m", "sys1_pll_200m_cg", 1, 4);
-	hws[IMX8MQ_SYS1_PLL_266M] = imx_clk_hw_fixed_factor("sys1_pll_266m", "sys1_pll_266m_cg", 1, 3);
-	hws[IMX8MQ_SYS1_PLL_400M] = imx_clk_hw_fixed_factor("sys1_pll_400m", "sys1_pll_400m_cg", 1, 2);
-	hws[IMX8MQ_SYS1_PLL_800M] = imx_clk_hw_fixed_factor("sys1_pll_800m", "sys1_pll_800m_cg", 1, 1);
+	hws[IMX8MQ_SYS1_PLL_40M] = imx_clk_hw_fixed_factor("sys1_pll_40m", "sys1_pll_out", 1, 20);
+	hws[IMX8MQ_SYS1_PLL_80M] = imx_clk_hw_fixed_factor("sys1_pll_80m", "sys1_pll_out", 1, 10);
+	hws[IMX8MQ_SYS1_PLL_100M] = imx_clk_hw_fixed_factor("sys1_pll_100m", "sys1_pll_out", 1, 8);
+	hws[IMX8MQ_SYS1_PLL_133M] = imx_clk_hw_fixed_factor("sys1_pll_133m", "sys1_pll_out", 1, 6);
+	hws[IMX8MQ_SYS1_PLL_160M] = imx_clk_hw_fixed_factor("sys1_pll_160m", "sys1_pll_out", 1, 5);
+	hws[IMX8MQ_SYS1_PLL_200M] = imx_clk_hw_fixed_factor("sys1_pll_200m", "sys1_pll_out", 1, 4);
+	hws[IMX8MQ_SYS1_PLL_266M] = imx_clk_hw_fixed_factor("sys1_pll_266m", "sys1_pll_out", 1, 3);
+	hws[IMX8MQ_SYS1_PLL_400M] = imx_clk_hw_fixed_factor("sys1_pll_400m", "sys1_pll_out", 1, 2);
+	hws[IMX8MQ_SYS1_PLL_800M] = imx_clk_hw_fixed_factor("sys1_pll_800m", "sys1_pll_out", 1, 1);
 
 	/* SYS PLL2 fixed output */
-	hws[IMX8MQ_SYS2_PLL_50M_CG] = imx_clk_hw_gate("sys2_pll_50m_cg", "sys2_pll_out", base + 0x3c, 9);
-	hws[IMX8MQ_SYS2_PLL_100M_CG] = imx_clk_hw_gate("sys2_pll_100m_cg", "sys2_pll_out", base + 0x3c, 11);
-	hws[IMX8MQ_SYS2_PLL_125M_CG] = imx_clk_hw_gate("sys2_pll_125m_cg", "sys2_pll_out", base + 0x3c, 13);
-	hws[IMX8MQ_SYS2_PLL_166M_CG] = imx_clk_hw_gate("sys2_pll_166m_cg", "sys2_pll_out", base + 0x3c, 15);
-	hws[IMX8MQ_SYS2_PLL_200M_CG] = imx_clk_hw_gate("sys2_pll_200m_cg", "sys2_pll_out", base + 0x3c, 17);
-	hws[IMX8MQ_SYS2_PLL_250M_CG] = imx_clk_hw_gate("sys2_pll_250m_cg", "sys2_pll_out", base + 0x3c, 19);
-	hws[IMX8MQ_SYS2_PLL_333M_CG] = imx_clk_hw_gate("sys2_pll_333m_cg", "sys2_pll_out", base + 0x3c, 21);
-	hws[IMX8MQ_SYS2_PLL_500M_CG] = imx_clk_hw_gate("sys2_pll_500m_cg", "sys2_pll_out", base + 0x3c, 23);
-	hws[IMX8MQ_SYS2_PLL_1000M_CG] = imx_clk_hw_gate("sys2_pll_1000m_cg", "sys2_pll_out", base + 0x3c, 25);
-
-	hws[IMX8MQ_SYS2_PLL_50M] = imx_clk_hw_fixed_factor("sys2_pll_50m", "sys2_pll_50m_cg", 1, 20);
-	hws[IMX8MQ_SYS2_PLL_100M] = imx_clk_hw_fixed_factor("sys2_pll_100m", "sys2_pll_100m_cg", 1, 10);
-	hws[IMX8MQ_SYS2_PLL_125M] = imx_clk_hw_fixed_factor("sys2_pll_125m", "sys2_pll_125m_cg", 1, 8);
-	hws[IMX8MQ_SYS2_PLL_166M] = imx_clk_hw_fixed_factor("sys2_pll_166m", "sys2_pll_166m_cg", 1, 6);
-	hws[IMX8MQ_SYS2_PLL_200M] = imx_clk_hw_fixed_factor("sys2_pll_200m", "sys2_pll_200m_cg", 1, 5);
-	hws[IMX8MQ_SYS2_PLL_250M] = imx_clk_hw_fixed_factor("sys2_pll_250m", "sys2_pll_250m_cg", 1, 4);
-	hws[IMX8MQ_SYS2_PLL_333M] = imx_clk_hw_fixed_factor("sys2_pll_333m", "sys2_pll_333m_cg", 1, 3);
-	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_500m_cg", 1, 2);
-	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_1000m_cg", 1, 1);
+	hws[IMX8MQ_SYS2_PLL_50M] = imx_clk_hw_fixed_factor("sys2_pll_50m", "sys2_pll_out", 1, 20);
+	hws[IMX8MQ_SYS2_PLL_100M] = imx_clk_hw_fixed_factor("sys2_pll_100m", "sys2_pll_out", 1, 10);
+	hws[IMX8MQ_SYS2_PLL_125M] = imx_clk_hw_fixed_factor("sys2_pll_125m", "sys2_pll_out", 1, 8);
+	hws[IMX8MQ_SYS2_PLL_166M] = imx_clk_hw_fixed_factor("sys2_pll_166m", "sys2_pll_out", 1, 6);
+	hws[IMX8MQ_SYS2_PLL_200M] = imx_clk_hw_fixed_factor("sys2_pll_200m", "sys2_pll_out", 1, 5);
+	hws[IMX8MQ_SYS2_PLL_250M] = imx_clk_hw_fixed_factor("sys2_pll_250m", "sys2_pll_out", 1, 4);
+	hws[IMX8MQ_SYS2_PLL_333M] = imx_clk_hw_fixed_factor("sys2_pll_333m", "sys2_pll_out", 1, 3);
+	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_out", 1, 2);
+	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
 
 	hws[IMX8MQ_CLK_MON_AUDIO_PLL1_DIV] = imx_clk_hw_divider("audio_pll1_out_monitor", "audio_pll1_bypass", base + 0x78, 0, 3);
 	hws[IMX8MQ_CLK_MON_AUDIO_PLL2_DIV] = imx_clk_hw_divider("audio_pll2_out_monitor", "audio_pll2_bypass", base + 0x78, 4, 3);
diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
index 82e907ce7bdd..afa74d7ba100 100644
--- a/include/dt-bindings/clock/imx8mq-clock.h
+++ b/include/dt-bindings/clock/imx8mq-clock.h
@@ -405,25 +405,6 @@
 
 #define IMX8MQ_VIDEO2_PLL1_REF_SEL		266
 
-#define IMX8MQ_SYS1_PLL_40M_CG			267
-#define IMX8MQ_SYS1_PLL_80M_CG			268
-#define IMX8MQ_SYS1_PLL_100M_CG			269
-#define IMX8MQ_SYS1_PLL_133M_CG			270
-#define IMX8MQ_SYS1_PLL_160M_CG			271
-#define IMX8MQ_SYS1_PLL_200M_CG			272
-#define IMX8MQ_SYS1_PLL_266M_CG			273
-#define IMX8MQ_SYS1_PLL_400M_CG			274
-#define IMX8MQ_SYS1_PLL_800M_CG			275
-#define IMX8MQ_SYS2_PLL_50M_CG			276
-#define IMX8MQ_SYS2_PLL_100M_CG			277
-#define IMX8MQ_SYS2_PLL_125M_CG			278
-#define IMX8MQ_SYS2_PLL_166M_CG			279
-#define IMX8MQ_SYS2_PLL_200M_CG			280
-#define IMX8MQ_SYS2_PLL_250M_CG			281
-#define IMX8MQ_SYS2_PLL_333M_CG			282
-#define IMX8MQ_SYS2_PLL_500M_CG			283
-#define IMX8MQ_SYS2_PLL_1000M_CG		284
-
 #define IMX8MQ_CLK_GPU_CORE			285
 #define IMX8MQ_CLK_GPU_SHADER			286
 #define IMX8MQ_CLK_M4_CORE			287
-- 
2.29.2


WARNING: multiple messages have this Message-ID (diff)
From: Lucas Stach <l.stach@pengutronix.de>
To: Abel Vesa <abel.vesa@nxp.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de, patchwork-lst@pengutronix.de
Subject: [PATCH] clk: imx8mq: remove SYS PLL 1/2 clock gates
Date: Fri, 28 May 2021 20:01:35 +0200	[thread overview]
Message-ID: <20210528180135.1640876-1-l.stach@pengutronix.de> (raw)

Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks
the uSDHC module which is sporadically unable to enumerate devices after
this change. Also it makes AMP clock management harder with no obvious
benefit to Linux, so just revert the change.

Fixes: b04383b6a558 ("clk: imx8mq: Define gates for pll1/2 fixed dividers")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
Previously this was a more targeted change only reverting the problematic
bit for uSDHC, but Jacky Bai expressed the desire to just revert the whole
change, as it makes things harder for AMP use-cases.
---
 drivers/clk/imx/clk-imx8mq.c             | 56 ++++++++----------------
 include/dt-bindings/clock/imx8mq-clock.h | 19 --------
 2 files changed, 18 insertions(+), 57 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index b08019e1faf9..c491bc9c61ce 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -358,46 +358,26 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_hw_sscg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
 
 	/* SYS PLL1 fixed output */
-	hws[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_hw_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
-	hws[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_hw_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
-	hws[IMX8MQ_SYS1_PLL_100M_CG] = imx_clk_hw_gate("sys1_pll_100m_cg", "sys1_pll_out", base + 0x30, 13);
-	hws[IMX8MQ_SYS1_PLL_133M_CG] = imx_clk_hw_gate("sys1_pll_133m_cg", "sys1_pll_out", base + 0x30, 15);
-	hws[IMX8MQ_SYS1_PLL_160M_CG] = imx_clk_hw_gate("sys1_pll_160m_cg", "sys1_pll_out", base + 0x30, 17);
-	hws[IMX8MQ_SYS1_PLL_200M_CG] = imx_clk_hw_gate("sys1_pll_200m_cg", "sys1_pll_out", base + 0x30, 19);
-	hws[IMX8MQ_SYS1_PLL_266M_CG] = imx_clk_hw_gate("sys1_pll_266m_cg", "sys1_pll_out", base + 0x30, 21);
-	hws[IMX8MQ_SYS1_PLL_400M_CG] = imx_clk_hw_gate("sys1_pll_400m_cg", "sys1_pll_out", base + 0x30, 23);
-	hws[IMX8MQ_SYS1_PLL_800M_CG] = imx_clk_hw_gate("sys1_pll_800m_cg", "sys1_pll_out", base + 0x30, 25);
-
-	hws[IMX8MQ_SYS1_PLL_40M] = imx_clk_hw_fixed_factor("sys1_pll_40m", "sys1_pll_40m_cg", 1, 20);
-	hws[IMX8MQ_SYS1_PLL_80M] = imx_clk_hw_fixed_factor("sys1_pll_80m", "sys1_pll_80m_cg", 1, 10);
-	hws[IMX8MQ_SYS1_PLL_100M] = imx_clk_hw_fixed_factor("sys1_pll_100m", "sys1_pll_100m_cg", 1, 8);
-	hws[IMX8MQ_SYS1_PLL_133M] = imx_clk_hw_fixed_factor("sys1_pll_133m", "sys1_pll_133m_cg", 1, 6);
-	hws[IMX8MQ_SYS1_PLL_160M] = imx_clk_hw_fixed_factor("sys1_pll_160m", "sys1_pll_160m_cg", 1, 5);
-	hws[IMX8MQ_SYS1_PLL_200M] = imx_clk_hw_fixed_factor("sys1_pll_200m", "sys1_pll_200m_cg", 1, 4);
-	hws[IMX8MQ_SYS1_PLL_266M] = imx_clk_hw_fixed_factor("sys1_pll_266m", "sys1_pll_266m_cg", 1, 3);
-	hws[IMX8MQ_SYS1_PLL_400M] = imx_clk_hw_fixed_factor("sys1_pll_400m", "sys1_pll_400m_cg", 1, 2);
-	hws[IMX8MQ_SYS1_PLL_800M] = imx_clk_hw_fixed_factor("sys1_pll_800m", "sys1_pll_800m_cg", 1, 1);
+	hws[IMX8MQ_SYS1_PLL_40M] = imx_clk_hw_fixed_factor("sys1_pll_40m", "sys1_pll_out", 1, 20);
+	hws[IMX8MQ_SYS1_PLL_80M] = imx_clk_hw_fixed_factor("sys1_pll_80m", "sys1_pll_out", 1, 10);
+	hws[IMX8MQ_SYS1_PLL_100M] = imx_clk_hw_fixed_factor("sys1_pll_100m", "sys1_pll_out", 1, 8);
+	hws[IMX8MQ_SYS1_PLL_133M] = imx_clk_hw_fixed_factor("sys1_pll_133m", "sys1_pll_out", 1, 6);
+	hws[IMX8MQ_SYS1_PLL_160M] = imx_clk_hw_fixed_factor("sys1_pll_160m", "sys1_pll_out", 1, 5);
+	hws[IMX8MQ_SYS1_PLL_200M] = imx_clk_hw_fixed_factor("sys1_pll_200m", "sys1_pll_out", 1, 4);
+	hws[IMX8MQ_SYS1_PLL_266M] = imx_clk_hw_fixed_factor("sys1_pll_266m", "sys1_pll_out", 1, 3);
+	hws[IMX8MQ_SYS1_PLL_400M] = imx_clk_hw_fixed_factor("sys1_pll_400m", "sys1_pll_out", 1, 2);
+	hws[IMX8MQ_SYS1_PLL_800M] = imx_clk_hw_fixed_factor("sys1_pll_800m", "sys1_pll_out", 1, 1);
 
 	/* SYS PLL2 fixed output */
-	hws[IMX8MQ_SYS2_PLL_50M_CG] = imx_clk_hw_gate("sys2_pll_50m_cg", "sys2_pll_out", base + 0x3c, 9);
-	hws[IMX8MQ_SYS2_PLL_100M_CG] = imx_clk_hw_gate("sys2_pll_100m_cg", "sys2_pll_out", base + 0x3c, 11);
-	hws[IMX8MQ_SYS2_PLL_125M_CG] = imx_clk_hw_gate("sys2_pll_125m_cg", "sys2_pll_out", base + 0x3c, 13);
-	hws[IMX8MQ_SYS2_PLL_166M_CG] = imx_clk_hw_gate("sys2_pll_166m_cg", "sys2_pll_out", base + 0x3c, 15);
-	hws[IMX8MQ_SYS2_PLL_200M_CG] = imx_clk_hw_gate("sys2_pll_200m_cg", "sys2_pll_out", base + 0x3c, 17);
-	hws[IMX8MQ_SYS2_PLL_250M_CG] = imx_clk_hw_gate("sys2_pll_250m_cg", "sys2_pll_out", base + 0x3c, 19);
-	hws[IMX8MQ_SYS2_PLL_333M_CG] = imx_clk_hw_gate("sys2_pll_333m_cg", "sys2_pll_out", base + 0x3c, 21);
-	hws[IMX8MQ_SYS2_PLL_500M_CG] = imx_clk_hw_gate("sys2_pll_500m_cg", "sys2_pll_out", base + 0x3c, 23);
-	hws[IMX8MQ_SYS2_PLL_1000M_CG] = imx_clk_hw_gate("sys2_pll_1000m_cg", "sys2_pll_out", base + 0x3c, 25);
-
-	hws[IMX8MQ_SYS2_PLL_50M] = imx_clk_hw_fixed_factor("sys2_pll_50m", "sys2_pll_50m_cg", 1, 20);
-	hws[IMX8MQ_SYS2_PLL_100M] = imx_clk_hw_fixed_factor("sys2_pll_100m", "sys2_pll_100m_cg", 1, 10);
-	hws[IMX8MQ_SYS2_PLL_125M] = imx_clk_hw_fixed_factor("sys2_pll_125m", "sys2_pll_125m_cg", 1, 8);
-	hws[IMX8MQ_SYS2_PLL_166M] = imx_clk_hw_fixed_factor("sys2_pll_166m", "sys2_pll_166m_cg", 1, 6);
-	hws[IMX8MQ_SYS2_PLL_200M] = imx_clk_hw_fixed_factor("sys2_pll_200m", "sys2_pll_200m_cg", 1, 5);
-	hws[IMX8MQ_SYS2_PLL_250M] = imx_clk_hw_fixed_factor("sys2_pll_250m", "sys2_pll_250m_cg", 1, 4);
-	hws[IMX8MQ_SYS2_PLL_333M] = imx_clk_hw_fixed_factor("sys2_pll_333m", "sys2_pll_333m_cg", 1, 3);
-	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_500m_cg", 1, 2);
-	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_1000m_cg", 1, 1);
+	hws[IMX8MQ_SYS2_PLL_50M] = imx_clk_hw_fixed_factor("sys2_pll_50m", "sys2_pll_out", 1, 20);
+	hws[IMX8MQ_SYS2_PLL_100M] = imx_clk_hw_fixed_factor("sys2_pll_100m", "sys2_pll_out", 1, 10);
+	hws[IMX8MQ_SYS2_PLL_125M] = imx_clk_hw_fixed_factor("sys2_pll_125m", "sys2_pll_out", 1, 8);
+	hws[IMX8MQ_SYS2_PLL_166M] = imx_clk_hw_fixed_factor("sys2_pll_166m", "sys2_pll_out", 1, 6);
+	hws[IMX8MQ_SYS2_PLL_200M] = imx_clk_hw_fixed_factor("sys2_pll_200m", "sys2_pll_out", 1, 5);
+	hws[IMX8MQ_SYS2_PLL_250M] = imx_clk_hw_fixed_factor("sys2_pll_250m", "sys2_pll_out", 1, 4);
+	hws[IMX8MQ_SYS2_PLL_333M] = imx_clk_hw_fixed_factor("sys2_pll_333m", "sys2_pll_out", 1, 3);
+	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_out", 1, 2);
+	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
 
 	hws[IMX8MQ_CLK_MON_AUDIO_PLL1_DIV] = imx_clk_hw_divider("audio_pll1_out_monitor", "audio_pll1_bypass", base + 0x78, 0, 3);
 	hws[IMX8MQ_CLK_MON_AUDIO_PLL2_DIV] = imx_clk_hw_divider("audio_pll2_out_monitor", "audio_pll2_bypass", base + 0x78, 4, 3);
diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
index 82e907ce7bdd..afa74d7ba100 100644
--- a/include/dt-bindings/clock/imx8mq-clock.h
+++ b/include/dt-bindings/clock/imx8mq-clock.h
@@ -405,25 +405,6 @@
 
 #define IMX8MQ_VIDEO2_PLL1_REF_SEL		266
 
-#define IMX8MQ_SYS1_PLL_40M_CG			267
-#define IMX8MQ_SYS1_PLL_80M_CG			268
-#define IMX8MQ_SYS1_PLL_100M_CG			269
-#define IMX8MQ_SYS1_PLL_133M_CG			270
-#define IMX8MQ_SYS1_PLL_160M_CG			271
-#define IMX8MQ_SYS1_PLL_200M_CG			272
-#define IMX8MQ_SYS1_PLL_266M_CG			273
-#define IMX8MQ_SYS1_PLL_400M_CG			274
-#define IMX8MQ_SYS1_PLL_800M_CG			275
-#define IMX8MQ_SYS2_PLL_50M_CG			276
-#define IMX8MQ_SYS2_PLL_100M_CG			277
-#define IMX8MQ_SYS2_PLL_125M_CG			278
-#define IMX8MQ_SYS2_PLL_166M_CG			279
-#define IMX8MQ_SYS2_PLL_200M_CG			280
-#define IMX8MQ_SYS2_PLL_250M_CG			281
-#define IMX8MQ_SYS2_PLL_333M_CG			282
-#define IMX8MQ_SYS2_PLL_500M_CG			283
-#define IMX8MQ_SYS2_PLL_1000M_CG		284
-
 #define IMX8MQ_CLK_GPU_CORE			285
 #define IMX8MQ_CLK_GPU_SHADER			286
 #define IMX8MQ_CLK_M4_CORE			287
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-05-28 18:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-28 18:01 Lucas Stach [this message]
2021-05-28 18:01 ` [PATCH] clk: imx8mq: remove SYS PLL 1/2 clock gates Lucas Stach
2021-06-02  7:46 ` Stephen Boyd
2021-06-02  7:46   ` Stephen Boyd
2021-06-14 13:29   ` Abel Vesa
2021-06-14 13:29     ` Abel Vesa
2021-06-14 13:43     ` Lucas Stach
2021-06-14 13:43       ` Lucas Stach
2021-06-14 14:04       ` Abel Vesa
2021-06-14 14:04         ` Abel Vesa
2021-06-14 13:33 ` Abel Vesa
2021-06-14 13:33   ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210528180135.1640876-1-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=abel.vesa@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=mturquette@baylibre.com \
    --cc=patchwork-lst@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.