From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 4/5] arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Date: Tue, 1 Jun 2021 18:47:59 +0200 [thread overview]
Message-ID: <20210601164800.7670-5-jbx6244@gmail.com> (raw)
In-Reply-To: <20210601164800.7670-1-jbx6244@gmail.com>
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 4e243d72e..248ebb61a 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -822,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bc0bdc3d8..8c821acb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -819,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a2eba5357..c1a253507 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1418,7 +1418,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1445,7 +1445,7 @@
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 4/5] arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Date: Tue, 1 Jun 2021 18:47:59 +0200 [thread overview]
Message-ID: <20210601164800.7670-5-jbx6244@gmail.com> (raw)
In-Reply-To: <20210601164800.7670-1-jbx6244@gmail.com>
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 4e243d72e..248ebb61a 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -822,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bc0bdc3d8..8c821acb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -819,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a2eba5357..c1a253507 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1418,7 +1418,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1445,7 +1445,7 @@
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
--
2.11.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 4/5] arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Date: Tue, 1 Jun 2021 18:47:59 +0200 [thread overview]
Message-ID: <20210601164800.7670-5-jbx6244@gmail.com> (raw)
In-Reply-To: <20210601164800.7670-1-jbx6244@gmail.com>
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 4e243d72e..248ebb61a 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -822,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bc0bdc3d8..8c821acb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -819,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a2eba5357..c1a253507 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1418,7 +1418,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1445,7 +1445,7 @@
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 4/5] arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Date: Tue, 1 Jun 2021 18:47:59 +0200 [thread overview]
Message-ID: <20210601164800.7670-5-jbx6244@gmail.com> (raw)
In-Reply-To: <20210601164800.7670-1-jbx6244@gmail.com>
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 4e243d72e..248ebb61a 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -822,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bc0bdc3d8..8c821acb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -819,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a2eba5357..c1a253507 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1418,7 +1418,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1445,7 +1445,7 @@
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
--
2.11.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2021-06-01 16:48 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 16:47 [PATCH v7 0/5] convert grf.txt to YAML Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` [PATCH v7 1/5] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-03 5:54 ` Vinod Koul
2021-06-03 5:54 ` Vinod Koul
2021-06-03 5:54 ` Vinod Koul
2021-06-03 5:54 ` Vinod Koul
2021-06-03 8:58 ` Heiko Stübner
2021-06-03 8:58 ` Heiko Stübner
2021-06-03 8:58 ` Heiko Stübner
2021-06-03 8:58 ` Heiko Stübner
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:38 ` Johan Jonker
2021-06-07 13:38 ` Johan Jonker
2021-06-07 13:38 ` Johan Jonker
2021-06-07 13:38 ` Johan Jonker
2021-06-07 14:18 ` [PATCH] dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml Heiko Stuebner
2021-06-07 14:18 ` Heiko Stuebner
2021-06-07 14:18 ` Heiko Stuebner
2021-06-07 14:18 ` Heiko Stuebner
2021-06-07 15:37 ` Johan Jonker
2021-06-07 15:37 ` Johan Jonker
2021-06-07 15:37 ` Johan Jonker
2021-06-07 15:37 ` Johan Jonker
2021-06-10 7:30 ` Heiko Stübner
2021-06-10 7:30 ` Heiko Stübner
2021-06-10 7:30 ` Heiko Stübner
2021-06-10 7:30 ` Heiko Stübner
2021-06-01 16:47 ` [PATCH v7 2/5] dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-02 18:17 ` Rob Herring
2021-06-02 18:17 ` Rob Herring
2021-06-02 18:17 ` Rob Herring
2021-06-02 18:17 ` Rob Herring
2021-06-01 16:47 ` [PATCH v7 3/5] ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2 Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker [this message]
2021-06-01 16:47 ` [PATCH v7 4/5] arm64: " Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:48 ` [PATCH v7 5/5] arm64: dts: rockchip: add USB support to rk3308.dtsi Johan Jonker
2021-06-01 16:48 ` Johan Jonker
2021-06-01 16:48 ` Johan Jonker
2021-06-01 16:48 ` Johan Jonker
2021-06-03 9:56 ` [PATCH v7 0/5] convert grf.txt to YAML Heiko Stuebner
2021-06-03 9:56 ` Heiko Stuebner
2021-06-03 9:56 ` Heiko Stuebner
2021-06-03 9:56 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210601164800.7670-5-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=t.schramm@manjaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.