From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, o.rempel@pengutronix.de Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, linux-remoteproc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com> Subject: [PATCH V2] remoteproc: imx_rproc: correct firmware reload Date: Wed, 2 Jun 2021 14:42:06 +0800 [thread overview] Message-ID: <20210602064206.27004-1-peng.fan@oss.nxp.com> (raw) From: Peng Fan <peng.fan@nxp.com> ENABLE_M4 should be set to 1 when loading code to TCM, otherwise you will not able to replace the firmware after you stop m4. Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit will be automatically set with SW_M4C_NON_SCLR_RST set. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> --- V2: Add R-b tag from Mathieu Rebase on remoteproc/for-next This https://patchwork.kernel.org/project/linux-remoteproc/cover/1620274123-1461-1-git-send-email-peng.fan@oss.nxp.com/ has been merged in remoteproc/for-next, so not mark here as dependency. drivers/remoteproc/imx_rproc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c index 7cc0cadea1cc..ce2ce42bee91 100644 --- a/drivers/remoteproc/imx_rproc.c +++ b/drivers/remoteproc/imx_rproc.c @@ -33,7 +33,8 @@ #define IMX7D_M4_START (IMX7D_ENABLE_M4 | IMX7D_SW_M4P_RST \ | IMX7D_SW_M4C_RST) -#define IMX7D_M4_STOP IMX7D_SW_M4C_NON_SCLR_RST +#define IMX7D_M4_STOP (IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST | \ + IMX7D_SW_M4C_NON_SCLR_RST) /* Address: 0x020D8000 */ #define IMX6SX_SRC_SCR 0x00 @@ -44,7 +45,8 @@ #define IMX6SX_M4_START (IMX6SX_ENABLE_M4 | IMX6SX_SW_M4P_RST \ | IMX6SX_SW_M4C_RST) -#define IMX6SX_M4_STOP IMX6SX_SW_M4C_NON_SCLR_RST +#define IMX6SX_M4_STOP (IMX6SX_ENABLE_M4 | IMX6SX_SW_M4C_RST | \ + IMX6SX_SW_M4C_NON_SCLR_RST) #define IMX6SX_M4_RST_MASK (IMX6SX_ENABLE_M4 | IMX6SX_SW_M4P_RST \ | IMX6SX_SW_M4C_NON_SCLR_RST \ | IMX6SX_SW_M4C_RST) @@ -691,7 +693,7 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv) return ret; } - if (!(val & dcfg->src_stop)) + if ((val & dcfg->src_mask) != dcfg->src_stop) priv->rproc->state = RPROC_DETACHED; return 0; -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, o.rempel@pengutronix.de Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, linux-remoteproc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com> Subject: [PATCH V2] remoteproc: imx_rproc: correct firmware reload Date: Wed, 2 Jun 2021 14:42:06 +0800 [thread overview] Message-ID: <20210602064206.27004-1-peng.fan@oss.nxp.com> (raw) From: Peng Fan <peng.fan@nxp.com> ENABLE_M4 should be set to 1 when loading code to TCM, otherwise you will not able to replace the firmware after you stop m4. Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit will be automatically set with SW_M4C_NON_SCLR_RST set. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peng Fan <peng.fan@nxp.com> --- V2: Add R-b tag from Mathieu Rebase on remoteproc/for-next This https://patchwork.kernel.org/project/linux-remoteproc/cover/1620274123-1461-1-git-send-email-peng.fan@oss.nxp.com/ has been merged in remoteproc/for-next, so not mark here as dependency. drivers/remoteproc/imx_rproc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c index 7cc0cadea1cc..ce2ce42bee91 100644 --- a/drivers/remoteproc/imx_rproc.c +++ b/drivers/remoteproc/imx_rproc.c @@ -33,7 +33,8 @@ #define IMX7D_M4_START (IMX7D_ENABLE_M4 | IMX7D_SW_M4P_RST \ | IMX7D_SW_M4C_RST) -#define IMX7D_M4_STOP IMX7D_SW_M4C_NON_SCLR_RST +#define IMX7D_M4_STOP (IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST | \ + IMX7D_SW_M4C_NON_SCLR_RST) /* Address: 0x020D8000 */ #define IMX6SX_SRC_SCR 0x00 @@ -44,7 +45,8 @@ #define IMX6SX_M4_START (IMX6SX_ENABLE_M4 | IMX6SX_SW_M4P_RST \ | IMX6SX_SW_M4C_RST) -#define IMX6SX_M4_STOP IMX6SX_SW_M4C_NON_SCLR_RST +#define IMX6SX_M4_STOP (IMX6SX_ENABLE_M4 | IMX6SX_SW_M4C_RST | \ + IMX6SX_SW_M4C_NON_SCLR_RST) #define IMX6SX_M4_RST_MASK (IMX6SX_ENABLE_M4 | IMX6SX_SW_M4P_RST \ | IMX6SX_SW_M4C_NON_SCLR_RST \ | IMX6SX_SW_M4C_RST) @@ -691,7 +693,7 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv) return ret; } - if (!(val & dcfg->src_stop)) + if ((val & dcfg->src_mask) != dcfg->src_stop) priv->rproc->state = RPROC_DETACHED; return 0; -- 2.30.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-06-02 6:09 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-02 6:42 Peng Fan (OSS) [this message] 2021-06-02 6:42 ` [PATCH V2] remoteproc: imx_rproc: correct firmware reload Peng Fan (OSS) 2021-12-15 22:44 ` (subset) " Bjorn Andersson 2021-12-15 22:44 ` Bjorn Andersson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210602064206.27004-1-peng.fan@oss.nxp.com \ --to=peng.fan@oss.nxp.com \ --cc=bjorn.andersson@linaro.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=mathieu.poirier@linaro.org \ --cc=o.rempel@pengutronix.de \ --cc=ohad@wizery.com \ --cc=peng.fan@nxp.com \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.