From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> To: broonie@kernel.org, michal.simek@xilinx.com, robh+dt@kernel.org Cc: harinik@xilinx.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Subject: [PATCH v2] dt-bindings: spi: convert Cadence SPI bindings to YAML Date: Sat, 5 Jun 2021 09:38:11 +0900 [thread overview] Message-ID: <20210605003811.858676-1-iwamatsu@nigauri.org> (raw) Convert spi for Cadence SPI bindings documentation to YAML. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- v2: Add ref and enum is-decoded-cs. Add ref to num-cs. .../devicetree/bindings/spi/spi-cadence.txt | 30 --------- .../devicetree/bindings/spi/spi-cadence.yaml | 66 +++++++++++++++++++ 2 files changed, 66 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.yaml diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt deleted file mode 100644 index 05a2ef945664be..00000000000000 --- a/Documentation/devicetree/bindings/spi/spi-cadence.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence SPI controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - If a decoder is used, this will be the number of - chip selects after the decoder. -- is-decoded-cs : Flag to indicate whether decoder is used or not. - -Example: - - spi@e0007000 { - compatible = "xlnx,zynq-spi-r1p6"; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 26>, <&clkc 35>; - interrupt-parent = <&intc>; - interrupts = <0 49 4>; - num-cs = <4>; - is-decoded-cs = <0>; - reg = <0xe0007000 0x1000>; - } ; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml new file mode 100644 index 00000000000000..9787be21318e66 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-cadence.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - cdns,spi-r1p6 + - xlnx,zynq-spi-r1p6 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + + num-cs: + description: | + Number of chip selects used. If a decoder is used, + this will be the number of chip selects after the + decoder. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 4 + + is-decoded-cs: + description: | + Flag to indicate whether decoder is used or not. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + +unevaluatedProperties: false + +examples: + - | + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + }; +... -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> To: broonie@kernel.org, michal.simek@xilinx.com, robh+dt@kernel.org Cc: harinik@xilinx.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Subject: [PATCH v2] dt-bindings: spi: convert Cadence SPI bindings to YAML Date: Sat, 5 Jun 2021 09:38:11 +0900 [thread overview] Message-ID: <20210605003811.858676-1-iwamatsu@nigauri.org> (raw) Convert spi for Cadence SPI bindings documentation to YAML. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- v2: Add ref and enum is-decoded-cs. Add ref to num-cs. .../devicetree/bindings/spi/spi-cadence.txt | 30 --------- .../devicetree/bindings/spi/spi-cadence.yaml | 66 +++++++++++++++++++ 2 files changed, 66 insertions(+), 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.yaml diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt deleted file mode 100644 index 05a2ef945664be..00000000000000 --- a/Documentation/devicetree/bindings/spi/spi-cadence.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence SPI controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - If a decoder is used, this will be the number of - chip selects after the decoder. -- is-decoded-cs : Flag to indicate whether decoder is used or not. - -Example: - - spi@e0007000 { - compatible = "xlnx,zynq-spi-r1p6"; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 26>, <&clkc 35>; - interrupt-parent = <&intc>; - interrupts = <0 49 4>; - num-cs = <4>; - is-decoded-cs = <0>; - reg = <0xe0007000 0x1000>; - } ; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml new file mode 100644 index 00000000000000..9787be21318e66 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-cadence.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - cdns,spi-r1p6 + - xlnx,zynq-spi-r1p6 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + + num-cs: + description: | + Number of chip selects used. If a decoder is used, + this will be the number of chip selects after the + decoder. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 4 + + is-decoded-cs: + description: | + Flag to indicate whether decoder is used or not. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + +unevaluatedProperties: false + +examples: + - | + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + }; +... -- 2.30.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-06-05 0:38 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-05 0:38 Nobuhiro Iwamatsu [this message] 2021-06-05 0:38 ` [PATCH v2] dt-bindings: spi: convert Cadence SPI bindings to YAML Nobuhiro Iwamatsu 2021-06-16 23:36 ` Rob Herring 2021-06-16 23:36 ` Rob Herring 2021-06-17 15:01 ` Mark Brown 2021-06-17 15:01 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210605003811.858676-1-iwamatsu@nigauri.org \ --to=iwamatsu@nigauri.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=harinik@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=michal.simek@xilinx.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.