From: Muneendra Kumar <muneendra.kumar@broadcom.com> To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org, tj@kernel.org, linux-nvme@lists.infradead.org, hare@suse.de Cc: jsmart2021@gmail.com, emilne@redhat.com, mkumar@redhat.com, Gaurav Srivastava <gaurav.srivastava@broadcom.com> Subject: [PATCH v11 05/13] lpfc: vmid: VMID params initialization Date: Tue, 8 Jun 2021 10:05:48 +0530 [thread overview] Message-ID: <20210608043556.274139-6-muneendra.kumar@broadcom.com> (raw) In-Reply-To: <20210608043556.274139-1-muneendra.kumar@broadcom.com> From: Gaurav Srivastava <gaurav.srivastava@broadcom.com> This patch initializes the VMID parameters like the type of vmid, max number of vmids supported and timeout value for the vmid registration based on the user input. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> --- v11: No change v10: No change v9: updated comments v8: No change v7: No change v6: No change v5: No change v4: No change v3: No change v2: Ported the patch on top of 5.10/scsi-queue --- drivers/scsi/lpfc/lpfc_attr.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index c5e96cb904c8..eb88aaaf36eb 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -6162,6 +6162,45 @@ LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); */ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); +/* + * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if + * either vmid_app_header or vmid_priority_tagging is enabled. + * 4 - 255 = vmid support enabled for 4-255 VMs + * Value range is [4,255]. + */ +LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, + "Maximum number of VMs supported"); + +/* + * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours + * 0 = Timeout is disabled + * Value range is [0,24]. + */ +LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, + "Inactivity timeout in hours"); + +/* + * lpfc_vmid_app_header: Enable App Header VMID support + * 0 = Support is disabled (default) + * 1 = Support is enabled + * Value range is [0,1]. + */ +LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, + LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, + "Enable App Header VMID support"); + +/* + * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support + * 0 = Support is disabled (default) + * 1 = Allow supported targets only + * 2 = Allow all targets + * Value range is [0,2]. + */ +LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_ALL_TARGETS, + "Enable Priority Tagging VMID support"); + struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_nvme_info, &dev_attr_scsi_stat, @@ -6281,6 +6320,10 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_bbcr, &dev_attr_lpfc_enable_dpp, &dev_attr_lpfc_enable_mi, + &dev_attr_lpfc_max_vmid, + &dev_attr_lpfc_vmid_inactivity_timeout, + &dev_attr_lpfc_vmid_app_header, + &dev_attr_lpfc_vmid_priority_tagging, NULL, }; @@ -7357,6 +7400,11 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); lpfc_EnableXLane_init(phba, lpfc_EnableXLane); + /* VMID Inits */ + lpfc_max_vmid_init(phba, lpfc_max_vmid); + lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout); + lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header); + lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging); if (phba->sli_rev != LPFC_SLI_REV4) phba->cfg_EnableXLane = 0; lpfc_XLanePriority_init(phba, lpfc_XLanePriority); -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Muneendra Kumar <muneendra.kumar@broadcom.com> To: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org, tj@kernel.org, linux-nvme@lists.infradead.org, hare@suse.de Cc: jsmart2021@gmail.com, emilne@redhat.com, mkumar@redhat.com, Gaurav Srivastava <gaurav.srivastava@broadcom.com> Subject: [PATCH v11 05/13] lpfc: vmid: VMID params initialization Date: Tue, 8 Jun 2021 10:05:48 +0530 [thread overview] Message-ID: <20210608043556.274139-6-muneendra.kumar@broadcom.com> (raw) In-Reply-To: <20210608043556.274139-1-muneendra.kumar@broadcom.com> From: Gaurav Srivastava <gaurav.srivastava@broadcom.com> This patch initializes the VMID parameters like the type of vmid, max number of vmids supported and timeout value for the vmid registration based on the user input. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> --- v11: No change v10: No change v9: updated comments v8: No change v7: No change v6: No change v5: No change v4: No change v3: No change v2: Ported the patch on top of 5.10/scsi-queue --- drivers/scsi/lpfc/lpfc_attr.c | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index c5e96cb904c8..eb88aaaf36eb 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -6162,6 +6162,45 @@ LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); */ LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); +/* + * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if + * either vmid_app_header or vmid_priority_tagging is enabled. + * 4 - 255 = vmid support enabled for 4-255 VMs + * Value range is [4,255]. + */ +LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, + "Maximum number of VMs supported"); + +/* + * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours + * 0 = Timeout is disabled + * Value range is [0,24]. + */ +LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, + "Inactivity timeout in hours"); + +/* + * lpfc_vmid_app_header: Enable App Header VMID support + * 0 = Support is disabled (default) + * 1 = Support is enabled + * Value range is [0,1]. + */ +LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, + LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, + "Enable App Header VMID support"); + +/* + * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support + * 0 = Support is disabled (default) + * 1 = Allow supported targets only + * 2 = Allow all targets + * Value range is [0,2]. + */ +LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_DISABLE, + LPFC_VMID_PRIO_TAG_ALL_TARGETS, + "Enable Priority Tagging VMID support"); + struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_nvme_info, &dev_attr_scsi_stat, @@ -6281,6 +6320,10 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_enable_bbcr, &dev_attr_lpfc_enable_dpp, &dev_attr_lpfc_enable_mi, + &dev_attr_lpfc_max_vmid, + &dev_attr_lpfc_vmid_inactivity_timeout, + &dev_attr_lpfc_vmid_app_header, + &dev_attr_lpfc_vmid_priority_tagging, NULL, }; @@ -7357,6 +7400,11 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); lpfc_EnableXLane_init(phba, lpfc_EnableXLane); + /* VMID Inits */ + lpfc_max_vmid_init(phba, lpfc_max_vmid); + lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout); + lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header); + lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging); if (phba->sli_rev != LPFC_SLI_REV4) phba->cfg_EnableXLane = 0; lpfc_XLanePriority_init(phba, lpfc_XLanePriority); -- 2.26.2 _______________________________________________ Linux-nvme mailing list Linux-nvme@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-nvme
next prev parent reply other threads:[~2021-06-08 11:36 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-08 4:35 [PATCH v11 00/13] blkcg:Support to track FC storage blk io traffic Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 01/13] cgroup: Added cgroup_get_from_id Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 02/13] blkcg: Added a app identifier support for blkcg Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 03/13] nvme: Added a newsysfs attribute appid_store Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 04/13] lpfc: vmid: Add the datastructure for supporting VMID in lpfc Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar [this message] 2021-06-08 4:35 ` [PATCH v11 05/13] lpfc: vmid: VMID params initialization Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 06/13] lpfc: vmid: Add support for vmid in mailbox command, does vmid resource allocation and vmid cleanup Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 07/13] lpfc: vmid: Implements ELS commands for appid patch Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 08/13] lpfc: vmid: Functions to manage vmids Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 13:09 ` Hannes Reinecke 2021-06-08 13:09 ` Hannes Reinecke 2021-06-08 4:35 ` [PATCH v11 09/13] lpfc: vmid: Implements CT commands for appid Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 10/13] lpfc: vmid: Appends the vmid in the wqe before sending Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 11/13] lpfc: vmid: Timeout implementation for vmid Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 12/13] lpfc: vmid: Adding qfpa and vmid timeout check in worker thread Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar 2021-06-08 4:35 ` [PATCH v11 13/13] lpfc: vmid: Introducing vmid in io path Muneendra Kumar 2021-06-08 4:35 ` Muneendra Kumar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210608043556.274139-6-muneendra.kumar@broadcom.com \ --to=muneendra.kumar@broadcom.com \ --cc=emilne@redhat.com \ --cc=gaurav.srivastava@broadcom.com \ --cc=hare@suse.de \ --cc=jsmart2021@gmail.com \ --cc=linux-block@vger.kernel.org \ --cc=linux-nvme@lists.infradead.org \ --cc=linux-scsi@vger.kernel.org \ --cc=mkumar@redhat.com \ --cc=tj@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.