From: Yufen Yu <yuyufen@huawei.com>
To: <jejb@linux.ibm.com>, <martin.petersen@oracle.com>,
<john.garry@huawei.com>
Cc: <linux-scsi@vger.kernel.org>, <yanaijie@huawei.com>,
<wubo40@huawei.com>, <yuyufen@huawei.com>
Subject: [PATCH v2] scsi: libsas: add lun number check in .slave_alloc callback
Date: Wed, 9 Jun 2021 17:36:31 +0800 [thread overview]
Message-ID: <20210609093631.2557822-1-yuyufen@huawei.com> (raw)
We found that offline a ata device on hisi sas control and then
scanning the host can probe 255 not exist devices into system.
It can be reproduced easily as following:
Some ata devices on hisi sas v3 control:
[root@localhost ~]# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
1) echo "offline" > /sys/block/sdb/device/state
2) echo "- - -" > /sys/class/scsi_host/host2/scan
Then, we can see another 255 not exist devices in system:
[root@localhost ~]# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After REPORT LUN command issued to the offline device fail, it tries
to do a sequential scan and probe all devices whose lun is not 0
successfully.
To fix the problem, we try to do same things as commit 2fc62e2ac350
("[SCSI] libsas: disable scanning lun > 0 on ata devices"), which
will prevent the device whose lun number is not zero probe into system.
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
---
drivers/scsi/aic94xx/aic94xx_init.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
drivers/scsi/isci/init.c | 1 +
drivers/scsi/libsas/sas_scsi_host.c | 9 +++++++++
drivers/scsi/mvsas/mv_init.c | 1 +
drivers/scsi/pm8001/pm8001_init.c | 1 +
8 files changed, 16 insertions(+)
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index a195bfe9eccc..7a78606598c4 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -53,6 +53,7 @@ static struct scsi_host_template aic94xx_sht = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3e359ac752fd..15eaac3a4eb6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1771,6 +1771,7 @@ static struct scsi_host_template sht_v1_hw = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 46f60fc2a069..9df1639ffa65 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3584,6 +3584,7 @@ static struct scsi_host_template sht_v2_hw = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e95408314078..36ec3901cfd4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3155,6 +3155,7 @@ static struct scsi_host_template sht_v3_hw = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index c452849e7bb4..ffd33e5decae 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -167,6 +167,7 @@ static struct scsi_host_template isci_sht = {
.eh_abort_handler = sas_eh_abort_handler,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1bf939818c98..ee44a0d7730b 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -911,6 +911,14 @@ void sas_task_abort(struct sas_task *task)
blk_abort_request(sc->request);
}
+int sas_slave_alloc(struct scsi_device *sdev)
+{
+ if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
+ return -ENXIO;
+
+ return 0;
+}
+
void sas_target_destroy(struct scsi_target *starget)
{
struct domain_device *found_dev = starget->hostdata;
@@ -957,5 +965,6 @@ EXPORT_SYMBOL_GPL(sas_task_abort);
EXPORT_SYMBOL_GPL(sas_phy_reset);
EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
EXPORT_SYMBOL_GPL(sas_target_destroy);
EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 6aa2697c4a15..b03c0f35d7b0 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -46,6 +46,7 @@ static struct scsi_host_template mvs_sht = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index af09bd282cb9..313248c7bab9 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -101,6 +101,7 @@ static struct scsi_host_template pm8001_sht = {
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
#ifdef CONFIG_COMPAT
--
2.25.4
next reply other threads:[~2021-06-09 9:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 9:36 Yufen Yu [this message]
2021-06-09 9:40 ` [PATCH v2] scsi: libsas: add lun number check in .slave_alloc callback John Garry
2021-06-09 12:01 ` Yufen Yu
2021-06-09 12:09 ` John Garry
2021-06-09 12:49 ` Yufen Yu
2021-06-09 12:54 ` Jason Yan
[not found] ` <8f100f32-28fd-455d-0b25-163c48065f06@huawei.com>
2021-06-09 14:20 ` Jason Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609093631.2557822-1-yuyufen@huawei.com \
--to=yuyufen@huawei.com \
--cc=jejb@linux.ibm.com \
--cc=john.garry@huawei.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=wubo40@huawei.com \
--cc=yanaijie@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.