From: trix@redhat.com To: hao.wu@intel.com, mdf@kernel.org, corbet@lwn.net, michal.simek@xilinx.com Cc: linux-fpga@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Tom Rix <trix@redhat.com> Subject: [PATCH 2/7] fpga: xilinx: reorganize to subdir layout Date: Wed, 9 Jun 2021 06:17:07 -0700 [thread overview] Message-ID: <20210609131712.3080827-4-trix@redhat.com> (raw) In-Reply-To: <20210609131712.3080827-1-trix@redhat.com> From: Tom Rix <trix@redhat.com> Create a xilinx/ subdir Move xilinx-* and zynq* files to it. Add a Kconfig and Makefile Signed-off-by: Tom Rix <trix@redhat.com> --- drivers/fpga/Kconfig | 40 +--------------- drivers/fpga/Makefile | 5 +- drivers/fpga/xilinx/Kconfig | 48 +++++++++++++++++++ drivers/fpga/xilinx/Makefile | 8 ++++ .../fpga/{ => xilinx}/xilinx-pr-decoupler.c | 0 drivers/fpga/{ => xilinx}/xilinx-spi.c | 0 drivers/fpga/{ => xilinx}/zynq-fpga.c | 0 drivers/fpga/{ => xilinx}/zynqmp-fpga.c | 0 8 files changed, 58 insertions(+), 43 deletions(-) create mode 100644 drivers/fpga/xilinx/Kconfig create mode 100644 drivers/fpga/xilinx/Makefile rename drivers/fpga/{ => xilinx}/xilinx-pr-decoupler.c (100%) rename drivers/fpga/{ => xilinx}/xilinx-spi.c (100%) rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%) rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%) diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index c427b25cc6f7e..657703b41b06e 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -52,25 +52,12 @@ config FPGA_MGR_ALTERA_CVP FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V, Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe. -config FPGA_MGR_ZYNQ_FPGA - tristate "Xilinx Zynq FPGA" - depends on ARCH_ZYNQ || COMPILE_TEST - help - FPGA manager driver support for Xilinx Zynq FPGAs. - config FPGA_MGR_STRATIX10_SOC tristate "Intel Stratix10 SoC FPGA Manager" depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE) help FPGA manager driver support for the Intel Stratix10 SoC. -config FPGA_MGR_XILINX_SPI - tristate "Xilinx Configuration over Slave Serial (SPI)" - depends on SPI - help - FPGA manager driver support for Xilinx FPGA configuration - over slave serial interface. - config FPGA_MGR_ICE40_SPI tristate "Lattice iCE40 SPI" depends on OF && SPI @@ -113,23 +100,6 @@ config ALTERA_FREEZE_BRIDGE isolate one region of the FPGA from the busses while that region is being reprogrammed. -config XILINX_PR_DECOUPLER - tristate "Xilinx LogiCORE PR Decoupler" - depends on FPGA_BRIDGE - depends on HAS_IOMEM - help - Say Y to enable drivers for Xilinx LogiCORE PR Decoupler - or Xilinx Dynamic Function eXchnage AIX Shutdown Manager. - The PR Decoupler exists in the FPGA fabric to isolate one - region of the FPGA from the busses while that region is - being reprogrammed during partial reconfig. - The Dynamic Function eXchange AXI shutdown manager prevents - AXI traffic from passing through the bridge. The controller - safely handles AXI4MM and AXI4-Lite interfaces on a - Reconfigurable Partition when it is undergoing dynamic - reconfiguration, preventing the system deadlock that can - occur if AXI transactions are interrupted by DFX. - config FPGA_REGION tristate "FPGA Region" depends on FPGA_BRIDGE @@ -146,14 +116,6 @@ config OF_FPGA_REGION overlay. source "drivers/fpga/dfl/Kconfig" - -config FPGA_MGR_ZYNQMP_FPGA - tristate "Xilinx ZynqMP FPGA" - depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST) - help - FPGA manager driver support for Xilinx ZynqMP FPGAs. - This driver uses the processor configuration port(PCAP) - to configure the programmable logic(PL) through PS - on ZynqMP SoC. +source "drivers/fpga/xilinx/Kconfig" endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index bda74e54ce390..0868c7c4264d8 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -15,9 +15,6 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o -obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o -obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o -obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o @@ -25,10 +22,10 @@ obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o -obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o obj-$(CONFIG_FPGA_DFL) += dfl/ +obj-$(CONFIG_FPGA_XILINX) += xilinx/ diff --git a/drivers/fpga/xilinx/Kconfig b/drivers/fpga/xilinx/Kconfig new file mode 100644 index 0000000000000..1ef0b6a34ae0c --- /dev/null +++ b/drivers/fpga/xilinx/Kconfig @@ -0,0 +1,48 @@ +config FPGA_XILINX + bool "Xilinx Devices" + default y + help + If you have a xilinx fpga, say Y. + +if FPGA_XILINX + +config FPGA_MGR_ZYNQ_FPGA + tristate "Xilinx Zynq FPGA" + depends on ARCH_ZYNQ || COMPILE_TEST + help + FPGA manager driver support for Xilinx Zynq FPGAs. + +config FPGA_MGR_ZYNQMP_FPGA + tristate "Xilinx ZynqMP FPGA" + depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST) + help + FPGA manager driver support for Xilinx ZynqMP FPGAs. + This driver uses the processor configuration port(PCAP) + to configure the programmable logic(PL) through PS + on ZynqMP SoC. + +config XILINX_PR_DECOUPLER + tristate "Xilinx LogiCORE PR Decoupler" + depends on FPGA_BRIDGE + depends on HAS_IOMEM + help + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler + or Xilinx Dynamic Function eXchnage AIX Shutdown Manager. + The PR Decoupler exists in the FPGA fabric to isolate one + region of the FPGA from the busses while that region is + being reprogrammed during partial reconfig. + The Dynamic Function eXchange AXI shutdown manager prevents + AXI traffic from passing through the bridge. The controller + safely handles AXI4MM and AXI4-Lite interfaces on a + Reconfigurable Partition when it is undergoing dynamic + reconfiguration, preventing the system deadlock that can + occur if AXI transactions are interrupted by DFX. + +config FPGA_MGR_XILINX_SPI + tristate "Xilinx Configuration over Slave Serial (SPI)" + depends on SPI + help + FPGA manager driver support for Xilinx FPGA configuration + over slave serial interface. + +endif #FPGA_XILINX diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile new file mode 100644 index 0000000000000..7bb7543412790 --- /dev/null +++ b/drivers/fpga/xilinx/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o +obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o +obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o + + diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx/xilinx-pr-decoupler.c similarity index 100% rename from drivers/fpga/xilinx-pr-decoupler.c rename to drivers/fpga/xilinx/xilinx-pr-decoupler.c diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx/xilinx-spi.c similarity index 100% rename from drivers/fpga/xilinx-spi.c rename to drivers/fpga/xilinx/xilinx-spi.c diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/xilinx/zynq-fpga.c similarity index 100% rename from drivers/fpga/zynq-fpga.c rename to drivers/fpga/xilinx/zynq-fpga.c diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/xilinx/zynqmp-fpga.c similarity index 100% rename from drivers/fpga/zynqmp-fpga.c rename to drivers/fpga/xilinx/zynqmp-fpga.c -- 2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: trix@redhat.com To: hao.wu@intel.com, mdf@kernel.org, corbet@lwn.net, michal.simek@xilinx.com Cc: linux-fpga@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Tom Rix <trix@redhat.com> Subject: [PATCH 2/7] fpga: xilinx: reorganize to subdir layout Date: Wed, 9 Jun 2021 06:17:07 -0700 [thread overview] Message-ID: <20210609131712.3080827-4-trix@redhat.com> (raw) In-Reply-To: <20210609131712.3080827-1-trix@redhat.com> From: Tom Rix <trix@redhat.com> Create a xilinx/ subdir Move xilinx-* and zynq* files to it. Add a Kconfig and Makefile Signed-off-by: Tom Rix <trix@redhat.com> --- drivers/fpga/Kconfig | 40 +--------------- drivers/fpga/Makefile | 5 +- drivers/fpga/xilinx/Kconfig | 48 +++++++++++++++++++ drivers/fpga/xilinx/Makefile | 8 ++++ .../fpga/{ => xilinx}/xilinx-pr-decoupler.c | 0 drivers/fpga/{ => xilinx}/xilinx-spi.c | 0 drivers/fpga/{ => xilinx}/zynq-fpga.c | 0 drivers/fpga/{ => xilinx}/zynqmp-fpga.c | 0 8 files changed, 58 insertions(+), 43 deletions(-) create mode 100644 drivers/fpga/xilinx/Kconfig create mode 100644 drivers/fpga/xilinx/Makefile rename drivers/fpga/{ => xilinx}/xilinx-pr-decoupler.c (100%) rename drivers/fpga/{ => xilinx}/xilinx-spi.c (100%) rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%) rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%) diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index c427b25cc6f7e..657703b41b06e 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -52,25 +52,12 @@ config FPGA_MGR_ALTERA_CVP FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V, Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe. -config FPGA_MGR_ZYNQ_FPGA - tristate "Xilinx Zynq FPGA" - depends on ARCH_ZYNQ || COMPILE_TEST - help - FPGA manager driver support for Xilinx Zynq FPGAs. - config FPGA_MGR_STRATIX10_SOC tristate "Intel Stratix10 SoC FPGA Manager" depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE) help FPGA manager driver support for the Intel Stratix10 SoC. -config FPGA_MGR_XILINX_SPI - tristate "Xilinx Configuration over Slave Serial (SPI)" - depends on SPI - help - FPGA manager driver support for Xilinx FPGA configuration - over slave serial interface. - config FPGA_MGR_ICE40_SPI tristate "Lattice iCE40 SPI" depends on OF && SPI @@ -113,23 +100,6 @@ config ALTERA_FREEZE_BRIDGE isolate one region of the FPGA from the busses while that region is being reprogrammed. -config XILINX_PR_DECOUPLER - tristate "Xilinx LogiCORE PR Decoupler" - depends on FPGA_BRIDGE - depends on HAS_IOMEM - help - Say Y to enable drivers for Xilinx LogiCORE PR Decoupler - or Xilinx Dynamic Function eXchnage AIX Shutdown Manager. - The PR Decoupler exists in the FPGA fabric to isolate one - region of the FPGA from the busses while that region is - being reprogrammed during partial reconfig. - The Dynamic Function eXchange AXI shutdown manager prevents - AXI traffic from passing through the bridge. The controller - safely handles AXI4MM and AXI4-Lite interfaces on a - Reconfigurable Partition when it is undergoing dynamic - reconfiguration, preventing the system deadlock that can - occur if AXI transactions are interrupted by DFX. - config FPGA_REGION tristate "FPGA Region" depends on FPGA_BRIDGE @@ -146,14 +116,6 @@ config OF_FPGA_REGION overlay. source "drivers/fpga/dfl/Kconfig" - -config FPGA_MGR_ZYNQMP_FPGA - tristate "Xilinx ZynqMP FPGA" - depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST) - help - FPGA manager driver support for Xilinx ZynqMP FPGAs. - This driver uses the processor configuration port(PCAP) - to configure the programmable logic(PL) through PS - on ZynqMP SoC. +source "drivers/fpga/xilinx/Kconfig" endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index bda74e54ce390..0868c7c4264d8 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -15,9 +15,6 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o -obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o -obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o -obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o @@ -25,10 +22,10 @@ obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o -obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o obj-$(CONFIG_FPGA_DFL) += dfl/ +obj-$(CONFIG_FPGA_XILINX) += xilinx/ diff --git a/drivers/fpga/xilinx/Kconfig b/drivers/fpga/xilinx/Kconfig new file mode 100644 index 0000000000000..1ef0b6a34ae0c --- /dev/null +++ b/drivers/fpga/xilinx/Kconfig @@ -0,0 +1,48 @@ +config FPGA_XILINX + bool "Xilinx Devices" + default y + help + If you have a xilinx fpga, say Y. + +if FPGA_XILINX + +config FPGA_MGR_ZYNQ_FPGA + tristate "Xilinx Zynq FPGA" + depends on ARCH_ZYNQ || COMPILE_TEST + help + FPGA manager driver support for Xilinx Zynq FPGAs. + +config FPGA_MGR_ZYNQMP_FPGA + tristate "Xilinx ZynqMP FPGA" + depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST) + help + FPGA manager driver support for Xilinx ZynqMP FPGAs. + This driver uses the processor configuration port(PCAP) + to configure the programmable logic(PL) through PS + on ZynqMP SoC. + +config XILINX_PR_DECOUPLER + tristate "Xilinx LogiCORE PR Decoupler" + depends on FPGA_BRIDGE + depends on HAS_IOMEM + help + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler + or Xilinx Dynamic Function eXchnage AIX Shutdown Manager. + The PR Decoupler exists in the FPGA fabric to isolate one + region of the FPGA from the busses while that region is + being reprogrammed during partial reconfig. + The Dynamic Function eXchange AXI shutdown manager prevents + AXI traffic from passing through the bridge. The controller + safely handles AXI4MM and AXI4-Lite interfaces on a + Reconfigurable Partition when it is undergoing dynamic + reconfiguration, preventing the system deadlock that can + occur if AXI transactions are interrupted by DFX. + +config FPGA_MGR_XILINX_SPI + tristate "Xilinx Configuration over Slave Serial (SPI)" + depends on SPI + help + FPGA manager driver support for Xilinx FPGA configuration + over slave serial interface. + +endif #FPGA_XILINX diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile new file mode 100644 index 0000000000000..7bb7543412790 --- /dev/null +++ b/drivers/fpga/xilinx/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o +obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o +obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o + + diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx/xilinx-pr-decoupler.c similarity index 100% rename from drivers/fpga/xilinx-pr-decoupler.c rename to drivers/fpga/xilinx/xilinx-pr-decoupler.c diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx/xilinx-spi.c similarity index 100% rename from drivers/fpga/xilinx-spi.c rename to drivers/fpga/xilinx/xilinx-spi.c diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/xilinx/zynq-fpga.c similarity index 100% rename from drivers/fpga/zynq-fpga.c rename to drivers/fpga/xilinx/zynq-fpga.c diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/xilinx/zynqmp-fpga.c similarity index 100% rename from drivers/fpga/zynqmp-fpga.c rename to drivers/fpga/xilinx/zynqmp-fpga.c -- 2.26.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-09 13:17 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-09 13:17 [PATCH 0/7] fpga: reorganize to subdirs trix 2021-06-09 13:17 ` trix 2021-06-09 13:17 ` trix 2021-06-09 13:17 ` trix 2021-06-09 13:17 ` [PATCH 1/7] fpga: dfl: reorganize to subdir layout trix 2021-06-09 13:17 ` trix 2021-06-09 13:17 ` trix [this message] 2021-06-09 13:17 ` [PATCH 2/7] fpga: xilinx: " trix -- strict thread matches above, loose matches on Subject: below -- 2021-06-09 13:21 [PATCH 0/7] fpga: reorganize to subdirs trix 2021-06-09 13:21 ` [PATCH 2/7] fpga: xilinx: reorganize to subdir layout trix 2021-06-09 13:21 ` trix 2021-06-08 16:23 [PATCH 0/7] fpga: reorganize to subdirs trix 2021-06-08 16:23 ` [PATCH 2/7] fpga: xilinx: reorganize to subdir layout trix 2021-06-08 16:23 ` trix
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210609131712.3080827-4-trix@redhat.com \ --to=trix@redhat.com \ --cc=corbet@lwn.net \ --cc=hao.wu@intel.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-fpga@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mdf@kernel.org \ --cc=michal.simek@xilinx.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.