From: Matthew Brost <matthew.brost@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org>
Cc: daniele.ceraolospurio@intel.com, john.c.harrison@intel.com,
Michal.Wajdeczko@intel.com
Subject: [PATCH 01/13] drm/i915/guc: Introduce unified HXG messages
Date: Wed, 9 Jun 2021 21:36:37 -0700 [thread overview]
Message-ID: <20210610043649.144416-2-matthew.brost@intel.com> (raw)
In-Reply-To: <20210610043649.144416-1-matthew.brost@intel.com>
From: Michal Wajdeczko <michal.wajdeczko@intel.com>
New GuC firmware will unify format of MMIO and CTB H2G messages.
Introduce their definitions now to allow gradual transition of
our code to match new changes.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
---
.../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 213 ++++++++++++++++++
1 file changed, 213 insertions(+)
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
index 775e21f3058c..29ac823acd4c 100644
--- a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -6,6 +6,219 @@
#ifndef _ABI_GUC_MESSAGES_ABI_H
#define _ABI_GUC_MESSAGES_ABI_H
+/**
+ * DOC: HXG Message
+ *
+ * All messages exchanged with GuC are defined using 32 bit dwords.
+ * First dword is treated as a message header. Remaining dwords are optional.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | | | |
+ * | 0 | 31 | **ORIGIN** - originator of the message |
+ * | | | - _`GUC_HXG_ORIGIN_HOST` = 0 |
+ * | | | - _`GUC_HXG_ORIGIN_GUC` = 1 |
+ * | | | |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | **TYPE** - message type |
+ * | | | - _`GUC_HXG_TYPE_REQUEST` = 0 |
+ * | | | - _`GUC_HXG_TYPE_EVENT` = 1 |
+ * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3 |
+ * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5 |
+ * | | | - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6 |
+ * | | | - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7 |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **AUX** - auxiliary data (depends on TYPE) |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **PAYLOAD** - optional payload (depends on TYPE) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_MSG_MIN_LEN 1u
+#define GUC_HXG_MSG_0_ORIGIN (0x1 << 31)
+#define GUC_HXG_ORIGIN_HOST 0u
+#define GUC_HXG_ORIGIN_GUC 1u
+#define GUC_HXG_MSG_0_TYPE (0x7 << 28)
+#define GUC_HXG_TYPE_REQUEST 0u
+#define GUC_HXG_TYPE_EVENT 1u
+#define GUC_HXG_TYPE_NO_RESPONSE_BUSY 3u
+#define GUC_HXG_TYPE_NO_RESPONSE_RETRY 5u
+#define GUC_HXG_TYPE_RESPONSE_FAILURE 6u
+#define GUC_HXG_TYPE_RESPONSE_SUCCESS 7u
+#define GUC_HXG_MSG_0_AUX (0xfffffff << 0)
+#define GUC_HXG_MSG_n_PAYLOAD (0xffffffff << 0)
+
+/**
+ * DOC: HXG Request
+ *
+ * The `HXG Request`_ message should be used to initiate synchronous activity
+ * for which confirmation or return data is expected.
+ *
+ * The recipient of this message shall use `HXG Response`_, `HXG Failure`_
+ * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_
+ * message as a intermediate reply.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **DATA0** - request data (depends on ACTION) |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ACTION** - requested action code |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - optional data (depends on ACTION) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_REQUEST_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_REQUEST_MSG_0_DATA0 (0xfff << 16)
+#define GUC_HXG_REQUEST_MSG_0_ACTION (0xffff << 0)
+#define GUC_HXG_REQUEST_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Event
+ *
+ * The `HXG Event`_ message should be used to initiate asynchronous activity
+ * that does not involves immediate confirmation nor data.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **DATA0** - event data (depends on ACTION) |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ACTION** - event action code |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - optional event data (depends on ACTION) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_EVENT_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_EVENT_MSG_0_DATA0 (0xfff << 16)
+#define GUC_HXG_EVENT_MSG_0_ACTION (0xffff << 0)
+#define GUC_HXG_EVENT_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Busy
+ *
+ * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_
+ * message if the recipient expects that it processing will be longer than default
+ * timeout.
+ *
+ * The @COUNTER field may be used as a progress indicator.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **COUNTER** - progress indicator |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_BUSY_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_BUSY_MSG_0_COUNTER GUC_HXG_MSG_0_AUX
+
+/**
+ * DOC: HXG Retry
+ *
+ * The `HXG Retry`_ message should be used by recipient to indicate that the
+ * `HXG Request`_ message was dropped and it should be resent again.
+ *
+ * The @REASON field may be used to provide additional information.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **REASON** - reason for retry |
+ * | | | - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0 |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RETRY_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RETRY_MSG_0_REASON GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RETRY_REASON_UNSPECIFIED 0u
+
+/**
+ * DOC: HXG Failure
+ *
+ * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_
+ * message that could not be processed due to an error.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **HINT** - additional error hint |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ERROR** - error/result code |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_FAILURE_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_FAILURE_MSG_0_HINT (0xfff << 16)
+#define GUC_HXG_FAILURE_MSG_0_ERROR (0xffff << 0)
+
+/**
+ * DOC: HXG Response
+ *
+ * The `HXG Response`_ message shall be used as a reply to the `HXG Request`_
+ * message that was successfully processed without an error.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_) |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - data (depends on ACTION from `HXG Request`_) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RESPONSE_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RESPONSE_MSG_0_DATA0 GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RESPONSE_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/* deprecated */
#define INTEL_GUC_MSG_TYPE_SHIFT 28
#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
#define INTEL_GUC_MSG_DATA_SHIFT 16
--
2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Brost <matthew.brost@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org>
Subject: [Intel-gfx] [PATCH 01/13] drm/i915/guc: Introduce unified HXG messages
Date: Wed, 9 Jun 2021 21:36:37 -0700 [thread overview]
Message-ID: <20210610043649.144416-2-matthew.brost@intel.com> (raw)
In-Reply-To: <20210610043649.144416-1-matthew.brost@intel.com>
From: Michal Wajdeczko <michal.wajdeczko@intel.com>
New GuC firmware will unify format of MMIO and CTB H2G messages.
Introduce their definitions now to allow gradual transition of
our code to match new changes.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
---
.../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 213 ++++++++++++++++++
1 file changed, 213 insertions(+)
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
index 775e21f3058c..29ac823acd4c 100644
--- a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -6,6 +6,219 @@
#ifndef _ABI_GUC_MESSAGES_ABI_H
#define _ABI_GUC_MESSAGES_ABI_H
+/**
+ * DOC: HXG Message
+ *
+ * All messages exchanged with GuC are defined using 32 bit dwords.
+ * First dword is treated as a message header. Remaining dwords are optional.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | | | |
+ * | 0 | 31 | **ORIGIN** - originator of the message |
+ * | | | - _`GUC_HXG_ORIGIN_HOST` = 0 |
+ * | | | - _`GUC_HXG_ORIGIN_GUC` = 1 |
+ * | | | |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | **TYPE** - message type |
+ * | | | - _`GUC_HXG_TYPE_REQUEST` = 0 |
+ * | | | - _`GUC_HXG_TYPE_EVENT` = 1 |
+ * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3 |
+ * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5 |
+ * | | | - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6 |
+ * | | | - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7 |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **AUX** - auxiliary data (depends on TYPE) |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **PAYLOAD** - optional payload (depends on TYPE) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_MSG_MIN_LEN 1u
+#define GUC_HXG_MSG_0_ORIGIN (0x1 << 31)
+#define GUC_HXG_ORIGIN_HOST 0u
+#define GUC_HXG_ORIGIN_GUC 1u
+#define GUC_HXG_MSG_0_TYPE (0x7 << 28)
+#define GUC_HXG_TYPE_REQUEST 0u
+#define GUC_HXG_TYPE_EVENT 1u
+#define GUC_HXG_TYPE_NO_RESPONSE_BUSY 3u
+#define GUC_HXG_TYPE_NO_RESPONSE_RETRY 5u
+#define GUC_HXG_TYPE_RESPONSE_FAILURE 6u
+#define GUC_HXG_TYPE_RESPONSE_SUCCESS 7u
+#define GUC_HXG_MSG_0_AUX (0xfffffff << 0)
+#define GUC_HXG_MSG_n_PAYLOAD (0xffffffff << 0)
+
+/**
+ * DOC: HXG Request
+ *
+ * The `HXG Request`_ message should be used to initiate synchronous activity
+ * for which confirmation or return data is expected.
+ *
+ * The recipient of this message shall use `HXG Response`_, `HXG Failure`_
+ * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_
+ * message as a intermediate reply.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **DATA0** - request data (depends on ACTION) |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ACTION** - requested action code |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - optional data (depends on ACTION) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_REQUEST_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_REQUEST_MSG_0_DATA0 (0xfff << 16)
+#define GUC_HXG_REQUEST_MSG_0_ACTION (0xffff << 0)
+#define GUC_HXG_REQUEST_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Event
+ *
+ * The `HXG Event`_ message should be used to initiate asynchronous activity
+ * that does not involves immediate confirmation nor data.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **DATA0** - event data (depends on ACTION) |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ACTION** - event action code |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - optional event data (depends on ACTION) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_EVENT_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_EVENT_MSG_0_DATA0 (0xfff << 16)
+#define GUC_HXG_EVENT_MSG_0_ACTION (0xffff << 0)
+#define GUC_HXG_EVENT_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Busy
+ *
+ * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_
+ * message if the recipient expects that it processing will be longer than default
+ * timeout.
+ *
+ * The @COUNTER field may be used as a progress indicator.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **COUNTER** - progress indicator |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_BUSY_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_BUSY_MSG_0_COUNTER GUC_HXG_MSG_0_AUX
+
+/**
+ * DOC: HXG Retry
+ *
+ * The `HXG Retry`_ message should be used by recipient to indicate that the
+ * `HXG Request`_ message was dropped and it should be resent again.
+ *
+ * The @REASON field may be used to provide additional information.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **REASON** - reason for retry |
+ * | | | - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0 |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RETRY_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RETRY_MSG_0_REASON GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RETRY_REASON_UNSPECIFIED 0u
+
+/**
+ * DOC: HXG Failure
+ *
+ * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_
+ * message that could not be processed due to an error.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **HINT** - additional error hint |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ERROR** - error/result code |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_FAILURE_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_FAILURE_MSG_0_HINT (0xfff << 16)
+#define GUC_HXG_FAILURE_MSG_0_ERROR (0xffff << 0)
+
+/**
+ * DOC: HXG Response
+ *
+ * The `HXG Response`_ message shall be used as a reply to the `HXG Request`_
+ * message that was successfully processed without an error.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_) |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - data (depends on ACTION from `HXG Request`_) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RESPONSE_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RESPONSE_MSG_0_DATA0 GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RESPONSE_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/* deprecated */
#define INTEL_GUC_MSG_TYPE_SHIFT 28
#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
#define INTEL_GUC_MSG_DATA_SHIFT 16
--
2.28.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-06-10 4:19 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 4:36 [PATCH 00/13] Update firmware to v62.0.0 Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:16 ` Matthew Brost
2021-06-10 4:16 ` Matthew Brost
2021-06-10 4:36 ` Matthew Brost [this message]
2021-06-10 4:36 ` [Intel-gfx] [PATCH 01/13] drm/i915/guc: Introduce unified HXG messages Matthew Brost
2021-06-14 17:04 ` Daniele Ceraolo Spurio
2021-06-14 17:04 ` [Intel-gfx] " Daniele Ceraolo Spurio
2021-06-10 4:36 ` [PATCH 02/13] drm/i915/guc: Update MMIO based communication Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-14 18:11 ` Daniele Ceraolo Spurio
2021-06-14 18:11 ` [Intel-gfx] " Daniele Ceraolo Spurio
2021-06-10 4:36 ` [PATCH 03/13] drm/i915/guc: Update CTB response status definition Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:36 ` [PATCH 04/13] drm/i915/guc: Support per context scheduling policies Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:36 ` [PATCH 05/13] drm/i915/guc: Add flag for mark broken CTB Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:36 ` [PATCH 06/13] drm/i915/guc: New definition of the CTB descriptor Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-14 18:17 ` Daniele Ceraolo Spurio
2021-06-14 18:17 ` [Intel-gfx] " Daniele Ceraolo Spurio
2021-06-10 4:36 ` [PATCH 07/13] drm/i915/guc: New definition of the CTB registration action Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-14 18:21 ` Daniele Ceraolo Spurio
2021-06-14 18:21 ` [Intel-gfx] " Daniele Ceraolo Spurio
2021-06-10 4:36 ` [PATCH 08/13] drm/i915/guc: New CTB based communication Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-14 18:24 ` Daniele Ceraolo Spurio
2021-06-14 18:24 ` [Intel-gfx] " Daniele Ceraolo Spurio
2021-06-10 4:36 ` [PATCH 09/13] drm/i915/doc: Include GuC ABI documentation Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 13:55 ` Piotr Piórkowski
2021-06-10 13:55 ` Piotr Piórkowski
2021-06-10 4:36 ` [PATCH 10/13] drm/i915/guc: Kill guc_clients.ct_pool Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:36 ` [PATCH 11/13] drm/i915/guc: Kill ads.client_info Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:36 ` [PATCH 12/13] drm/i915/guc: Unified GuC log Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 4:36 ` [PATCH 13/13] drm/i915/guc: Update firmware to v62.0.0 Matthew Brost
2021-06-10 4:36 ` [Intel-gfx] " Matthew Brost
2021-06-10 5:09 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Update firmware to v62.0.0 (rev2) Patchwork
2021-06-10 5:10 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-06-10 5:38 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-06-10 7:10 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-06-10 13:35 ` [PATCH 00/13] Update firmware to v62.0.0 Michal Wajdeczko
2021-06-10 13:35 ` [Intel-gfx] " Michal Wajdeczko
2021-06-11 18:46 ` Matthew Brost
2021-06-11 18:46 ` [Intel-gfx] " Matthew Brost
-- strict thread matches above, loose matches on Subject: below --
2021-06-07 18:03 Matthew Brost
2021-06-07 18:03 ` [PATCH 01/13] drm/i915/guc: Introduce unified HXG messages Matthew Brost
2021-06-07 22:46 ` Daniele Ceraolo Spurio
2021-06-08 7:59 ` Michal Wajdeczko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210610043649.144416-2-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=Michal.Wajdeczko@intel.com \
--cc=daniele.ceraolospurio@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=john.c.harrison@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.