All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Westphal <fw@strlen.de>
To: <netdev@vger.kernel.org>
Cc: steffen.klassert@secunet.com, herbert@gondor.apana.org.au,
	Florian Westphal <fw@strlen.de>
Subject: [PATCH ipsec-next v2 2/5] xfrm: ipv6: move mip6_destopt_offset into xfrm core
Date: Fri, 11 Jun 2021 12:50:11 +0200	[thread overview]
Message-ID: <20210611105014.4675-3-fw@strlen.de> (raw)
In-Reply-To: <20210611105014.4675-1-fw@strlen.de>

This helper is relatively small, just move this to the xfrm core
and call it directly.

Next patch does the same for the ROUTING type.

Signed-off-by: Florian Westphal <fw@strlen.de>
---
 net/ipv6/mip6.c        | 49 ------------------------------------
 net/xfrm/xfrm_output.c | 57 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 49 deletions(-)

diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index bc560e1664aa..fba3b56a7dd2 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -247,54 +247,6 @@ static int mip6_destopt_reject(struct xfrm_state *x, struct sk_buff *skb,
 	return err;
 }
 
-static int mip6_destopt_offset(struct xfrm_state *x, struct sk_buff *skb,
-			       u8 **nexthdr)
-{
-	u16 offset = sizeof(struct ipv6hdr);
-	struct ipv6_opt_hdr *exthdr =
-				   (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
-	const unsigned char *nh = skb_network_header(skb);
-	unsigned int packet_len = skb_tail_pointer(skb) -
-		skb_network_header(skb);
-	int found_rhdr = 0;
-
-	*nexthdr = &ipv6_hdr(skb)->nexthdr;
-
-	while (offset + 1 <= packet_len) {
-
-		switch (**nexthdr) {
-		case NEXTHDR_HOP:
-			break;
-		case NEXTHDR_ROUTING:
-			found_rhdr = 1;
-			break;
-		case NEXTHDR_DEST:
-			/*
-			 * HAO MUST NOT appear more than once.
-			 * XXX: It is better to try to find by the end of
-			 * XXX: packet if HAO exists.
-			 */
-			if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0) {
-				net_dbg_ratelimited("mip6: hao exists already, override\n");
-				return offset;
-			}
-
-			if (found_rhdr)
-				return offset;
-
-			break;
-		default:
-			return offset;
-		}
-
-		offset += ipv6_optlen(exthdr);
-		*nexthdr = &exthdr->nexthdr;
-		exthdr = (struct ipv6_opt_hdr *)(nh + offset);
-	}
-
-	return offset;
-}
-
 static int mip6_destopt_init_state(struct xfrm_state *x)
 {
 	if (x->id.spi) {
@@ -332,7 +284,6 @@ static const struct xfrm_type mip6_destopt_type = {
 	.input		= mip6_destopt_input,
 	.output		= mip6_destopt_output,
 	.reject		= mip6_destopt_reject,
-	.hdr_offset	= mip6_destopt_offset,
 };
 
 static int mip6_rthdr_input(struct xfrm_state *x, struct sk_buff *skb)
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 6b44b6e738f7..29959054a535 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -77,8 +77,65 @@ static int xfrm4_transport_output(struct xfrm_state *x, struct sk_buff *skb)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_IPV6_MIP6)
+static int mip6_destopt_offset(struct xfrm_state *x, struct sk_buff *skb,
+			       u8 **nexthdr)
+{
+	u16 offset = sizeof(struct ipv6hdr);
+	struct ipv6_opt_hdr *exthdr =
+				   (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
+	const unsigned char *nh = skb_network_header(skb);
+	unsigned int packet_len = skb_tail_pointer(skb) -
+		skb_network_header(skb);
+	int found_rhdr = 0;
+
+	*nexthdr = &ipv6_hdr(skb)->nexthdr;
+
+	while (offset + 1 <= packet_len) {
+		switch (**nexthdr) {
+		case NEXTHDR_HOP:
+			break;
+		case NEXTHDR_ROUTING:
+			found_rhdr = 1;
+			break;
+		case NEXTHDR_DEST:
+			/* HAO MUST NOT appear more than once.
+			 * XXX: It is better to try to find by the end of
+			 * XXX: packet if HAO exists.
+			 */
+			if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0) {
+				net_dbg_ratelimited("mip6: hao exists already, override\n");
+				return offset;
+			}
+
+			if (found_rhdr)
+				return offset;
+
+			break;
+		default:
+			return offset;
+		}
+
+		offset += ipv6_optlen(exthdr);
+		*nexthdr = &exthdr->nexthdr;
+		exthdr = (struct ipv6_opt_hdr *)(nh + offset);
+	}
+
+	return offset;
+}
+#endif
+
 static int xfrm6_hdr_offset(struct xfrm_state *x, struct sk_buff *skb, u8 **prevhdr)
 {
+	switch (x->type->proto) {
+#if IS_ENABLED(CONFIG_IPV6_MIP6)
+	case IPPROTO_DSTOPTS:
+		return mip6_destopt_offset(x, skb, prevhdr);
+#endif
+	default:
+		break;
+	}
+
 	return x->type->hdr_offset(x, skb, prevhdr);
 }
 
-- 
2.31.1


  parent reply	other threads:[~2021-06-11 10:50 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-11 10:50 [PATCH ipsec-next v2 0/5] xfrm: ipv6: remove hdr_off indirection Florian Westphal
2021-06-11 10:50 ` [PATCH ipsec-next v2 1/5] xfrm: ipv6: add xfrm6_hdr_offset helper Florian Westphal
2021-06-11 10:50 ` Florian Westphal [this message]
2021-06-11 10:50 ` [PATCH ipsec-next v2 3/5] xfrm: ipv6: move mip6_rthdr_offset into xfrm core Florian Westphal
2021-06-11 10:50 ` [PATCH ipsec-next v2 4/5] xfrm: remove hdr_offset indirection Florian Westphal
2021-06-11 10:50 ` [PATCH ipsec-next v2 5/5] xfrm: merge dstopt and routing hdroff functions Florian Westphal
2021-06-14  9:55 ` [PATCH ipsec-next v2 0/5] xfrm: ipv6: remove hdr_off indirection Steffen Klassert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210611105014.4675-3-fw@strlen.de \
    --to=fw@strlen.de \
    --cc=herbert@gondor.apana.org.au \
    --cc=netdev@vger.kernel.org \
    --cc=steffen.klassert@secunet.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.